CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Matthews
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
Ships next business day
$15280
QTY
Matthews
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
Ships next business day
$18800
QTY
RPS Studio
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
Ships next business day
$2795
QTY
Matthews
MFR Part #: B389787
Samy's Part #: MATTB389787

The Matthews Light Medium Kit Aluminum Stand is designed primarily for use in lighting kits, this stand is compact and light weight. This stand employs a brake shoe system for locking off the riser tubes as opposed to pinch castings.
Availability: In Stock
Ships next business day
$8320
QTY
Matthews
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: More In Transit
$15280
QTY
Matthews
MFR Part #: 420110
Samy's Part #: MATT420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw or 2" End Jaw. The Center Jaw has a fixed...
Availability: More In Transit
$5600
QTY
Savage
MFR Part #: MF6
Samy's Part #: S-058746

The Savage 6 ft. MultiFlex Light Stand brings ultimate versatility to every location photographer’s gear set! It provides multiple flexible solutions to users working within environmental constraints with their equipment and set location. 
The light stand’s key feature is an individually adjustable...
Availability: In Stock
$15999
QTY
GTX Studio
MFR Part #: Z-LS08
Samy's Part #: S-052116

The Zuma 8ft. Light Stand (Black) is steel made for durability that can handle 10 pounds of weight. The light stand features adjustable, secure locking system and ideal for portable. The light stand is great for light and medium weight strobes, flash units, LED lights, reflectors and softboxes....
Availability: In Stock
Ships next business day
$1995
QTY
RPS Studio
MFR Part #: RS1068
Samy's Part #: S-005585

Medium weight stand for easily supports most monolites strobes and lampheads. Heavier diameter tubing for aded strength.
Availability: In Stock
$2995
QTY
RPS Studio
MFR Part #: RS-1145
Samy's Part #: S-022074

The RPS Studio 6 ft. Medium Boom Stand & Arm has a 2-section adjustable boom arm, a 3-section light stand, a connecting knuckle, and a fillable sand bag with connecting ring
Availability: In Stock
Ships next business day
$7995
QTY
Savage
MFR Part #: DS009-DB
Samy's Part #: S-055845

The Savage Drop Stand & Boom Arm features an aluminum, adjustable suspension boom arm and our 9′ Drop Stand. Providing all the benefits of a boom, minus the bulk, this duo is your solution to convenient, on-the-go photo/video gear. The boom arm collapses down to 45″, extends to 75″ and can be swapped out on the...
Availability: In Stock
Ships next business day
$12599
QTY
Manfrotto
MFR Part #: 155
Samy's Part #: MANF155

Twin swiveling 5/8" spigots and single lever lock Supplied with Camera Bracket 2933 Height: 5.7" Maximum Load Capacity 8.9 lbs
Availability: In Stock
$4988
QTY
Notice: This item is non-returnable
GTX Studio
MFR Part #: GPCLS40SL
Samy's Part #: S-062449

The GTX Studio 40 in. 3 Section C Stand with Sliding Leg is an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for con
...
Availability: In Stock
Ships next business day
$13495
QTY
Manfrotto
MFR Part #: 025BSL
Samy's Part #: MANF025BSL

The Manfrotto Black Super Boom features coaxial geared controls at the end of the boom, which permits movement a full 180°. It extends to 8.8' (2.7 m). This item replaces old catalog #3391 (BO3091B). It is a boom only

FEATURES:

  • Dual cranks provide remote control over fixture pan and tilt
...
Availability: More In Transit
$44488
QTY
Matthews
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
Ships next business day
$15600
QTY
Dot Line
MFR Part #: DL-0392P
Samy's Part #: S-014911

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
Ships next business day
$3995
QTY
Avenger
MFR Part #: A3043CS
Samy's Part #: S-003090

The Avenger A3043CS Roller Overhead Stand - 14.2 ft. (4.3 m) Chrome steel stand complete with braked wheels. 4 sections, 3 risers. Ø: 45, 40, 35, 30mm. Leg: 25x25mm.

Features:
  • Made for Overheads - Supports 400 square feet of butterfly material
  • Wide Base - Sure-footed stability at maximum heights
...
Availability: In Stock
$40988
QTY
Notice: This item is non-returnable
Avenger
MFR Part #: A2016DCB
Samy's Part #: S-002032

This is an Black Steel Base Century Stand. It has a detatchable "turtle" base that is easily removed for easy storage and transport. It has a 20" main riser and its maximum height is 4.5' (1.4 m).The innovative design on the Century Stand base allows individual legs to be set at any angle, and...
Availability: Special Order
$15988
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Savage
MFR Part #: DS-007
Samy's Part #: S-044531

The Savage Drop Stand Light Stand (7 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
Availability: In Stock
Ships next business day
$6099
QTY
Manfrotto
MFR Part #: 025BS
Samy's Part #: MANF025BS

The Manfrotto 025BS Super Boom features coaxial geared controls at the end of the boom, which permits movement of 180 degree. The 008BU (a.k.a 3071B) two section stand has black painted aluminum construction, with wheels. The stand section supports light fixture loads up to 66 lbs (30kg), to a...
Availability: In Stock
Ships next business day
$67488
QTY
Notice: This item is non-returnable
Matthews
MFR Part #: 429779
Samy's Part #: S-005627

The Matthews Baby Pin 5/8" with 3/8" Threaded Tip screws into a female 3/8" hole and provides an industry standard 5/8" (16mm) baby pin use with Lightweight Telescoping Hangers. Baby pins can be used with a variety of grip equipment including standard grip heads, lightweight telescoping hangers...
Availability: In Stock
$1040
QTY
Notice: This item is non-returnable
Savage
MFR Part #: DS-009
Samy's Part #: S-044532

The Savage Drop Stand Light Stand (9 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
Availability: In Stock
Ships next business day
$9099
QTY
Matthews
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
Ships next business day
$18800
QTY
Matthews
MFR Part #: H386021
Samy's Part #: MATTH386021

Junior & Senior Stands ? Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8? Posi-V-Lock female with pop up 5/8? male receiver....
Availability: In Stock
Ships next business day
$29280
QTY
STUFFT
MFR Part #: 10LB
Samy's Part #: S-024742

The Saddle Sandbags 10 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty
...
Availability: Special Order
Manfrotto
MFR Part #: 244MINI
Samy's Part #: S-040051

The Manfrotto 244MINI Friction Arm is a versatile 24cm (9.4 ") friction arm with 1 /4" attachments on both ends and additional 3/8'' adapter included. Attachments can easily be replaced by using the included hex key and are compatible with a range of different adapters.

Features:
  • Versatile
...
Availability: In Stock
Ships next business day
$10988
QTY
Manfrotto
MFR Part #: 035
Samy's Part #: MANF035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: In Stock
Ships next business day
$2959
QTY
Bessey
MFR Part #: XM5
Samy's Part #: S-061503

The
Bessey 2 in. Steel Spring Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help...
Availability: In Stock
Ships next business day
$390
QTY
Bessey
MFR Part #: XM7
Samy's Part #: S-061504

The
 Bessey 3 in. Steel Spring Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help...
Availability: In Stock
Ships next business day
$669
QTY
Phototools
MFR Part #: YWA25
Samy's Part #: S-034623

This set of Phototools locking casters are made for light stands with 25mm diameter legs. The casters slip over the end of the legs, and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$2900
QTY
Matthews
MFR Part #: 350629
Samy's Part #: S-028879

This clever adapter with Matthews 1/4-20 Male Bottom & 1/4-20 Female Top for NOGA Arm allows you to make quick changes to your equipment without having to mess with screws and threads. In low light, tight spaces or no time to lose, pull back the red sleeve and drop your preloaded monitor, mic, light...
Availability: In Stock
$4900
QTY
Notice: This item is non-returnable
Avenger
MFR Part #: D600CB
Samy's Part #: AVEND600CB

Mini boom black chromed. Min extension 117cm-Max load 30kg. Max extension 212cm-Max load 7kg. 16mm female stand attachment.
  • Black Chrome-plated Steel Construction
  • 83" Maximum Extension
  • Rubber Handle
  • Counterweight Hook
  • 5/8" Stud and Receiver
Availability: In Stock
Ships next business day
$12488
QTY
Westcott
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
Ships next business day
$4990
QTY
Matthews
MFR Part #: B681013
Samy's Part #: S-033380

The Matthews 40 In. Hollywood Gobo Arm with Grip head features the strongest Grip Head in the industry. The grip guaranteed to hold firmly, just set it and forget, it will not let the arm to slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in...
Availability: Special Order
$6200
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 541004
Samy's Part #: MATT541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
Ships next business day
$3600
QTY
RPS Studio
MFR Part #: RS1040
Samy's Part #: S-038310

The RPS Studio Light/Copy Light Compact Stand is excellent for copy stands, or for low background lighting. It can extend up to 16 inches maximum and closes down to 9.5 inches. The stand has two sections and it can hold up to 5.5 lbs maximum load.

Availability: In Stock
Ships next business day
$1095
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]