CONTACT US AT 800-321-4726
MFR Part #: 22031
Samy's Part #: CPMD22031
Correct color or B&W exposures every time regardless of contrast, brightness or conditions. Accurate to within 1%.
Availability: In Stock
MFR Part #: DL0188P
Samy's Part #: DOTLDL0188P
Use whenever you need a complete darkroom and none is available
Availability: In Stock
MFR Part #: 21204
Samy's Part #: CPMD21204
Turns a 1/4-20 threaded light stand top into a 3/8 threaded top.
Availability: In Stock
MFR Part #: DL0651BKP
Samy's Part #: DOTLDL0651BKP
Regular Cotton Blend Gloves. Material Cotton and Rayon blend in a medium size.
Availability: In Stock
MFR Part #: 800342
Samy's Part #: S-057678
The worries of too much development, dilution, time or agitation are gone. Stop bath? Fixer? Hardener? Gone the way of One-Hour-Photos and formaldehyde. Meet the labtender’s best friend, served neat. It may be clear and odorless but please do not drink it.
Processing all of your B&W film at home is easier than...
Availability: In-Store Only
MFR Part #: 800341
Samy's Part #: S-057679
Processing your own color film doesn't have to be complicated or expensive! This liquid chemical, two bath processing kit can be used at a variety of temperatures with the same equipment you already process your black and white film with at home. No darkroom or automated processor required!
FE...
Availability: In-Store Only
MFR Part #: 6601090
Samy's Part #: S-047970
The Kodak Ektacolor RA Developer Starter is used to make developer tank solutions, mix this starter with Kodak Ektacolor Prime SP Developer Replenisher or Ektacolor RA Developer Replenisher RT according to the directions on the starter label. Developer starter is a concentrate that is added to...
MFR Part #: DL-0189P
Samy's Part #: DOTLDL0189P
When you need to go light-tight and there is not a dark room available, the DLC 17 x 17” changing bag is the answer. The changing bag allows you to remove film from cameras, load bulk film into bulk film loaders, or load sheet film into cut-film holders. Made of high-quality rubberized material...
Availability: In Stock
MFR Part #: 13020
Samy's Part #: CPMD13020
Extra heavy paper, dry wax interleaves. Blotter paper buffered with calcium carbonate to eliminate acid transfer on prints. Paper stock contains no sulfates. Fifty year archival quality, museum use approved.
Availability: In Stock
MFR Part #: DL6121P
Samy's Part #: DOTLDL6121P
Three live rubber surfaces on each side to effectively squeegee surfaces dry. Wiper length 4-3/4", overall 8.
Availability: In Stock
MFR Part #: DL6814
Samy's Part #: DOTLDL6814
A deluxe, high grade extra-rigid developing tray. Features pouring spout, three slots for thermometer or print tongs. Ribbed bottom.
Availability: In Stock
MFR Part #: DL0301P
Samy's Part #: DOTLDL0301P
Bamboo Print Tongs in set of three. Color tips help keep them in proper chemical.
Availability: In Stock
MFR Part #: HA8773
Samy's Part #: HAMAHA8773
The Hama Polypropylene Graduate Beaker - 72 oz (2 Liter) is an unbreakable beaker made of heavy duty polypropylene for measuring and mixing. They are marked in both English and metric levels up the side.
Availability: In Stock
MFR Part #: 12410
Samy's Part #: CPMD12410
Precision Thermometer for use in a Darkroom. The Delta 6" Darkroom Thermometer is a hermetically sealed instrument that reads out in Fahrenheit and Celsius. It is accurate to within +/-
1°. Glass enclosed
Submersible
Availability: In Stock
MFR Part #: SE601
Samy's Part #: SEALSE601
ColorMount , the world's largest-selling adhesive, is a porous tissue, coated on both sides with a permanent adhesive. Its "breathability" makes it ideal for both non-porous and porous materials. Activated at low temperatures (175-200oF), ColorMount is perfect when you need speed and accuracy....
Availability: In Stock
MFR Part #: HG891
Samy's Part #: HEICHG89
The Heico Perma Wash Liquid For Black & White Film and Paper (1 Gallon) is a highly concentrated neutral liquid used to wash the film and paper. The wash liquid provides archival permanence in both films and paper besides saving lot of time. It saves more than 90% of normal wash water requirements,...
Availability: In-Store Only
MFR Part #: DL6131P
Samy's Part #: DOTLDL6131P
The Dot Line Stirring Paddle is an ideal tool for mixing darkroom chemistry and features a perforated design to allow for efficient stirring. Its long-handle design and textured grip helps to avoid splashing and slipping during use.
Availability: In Stock
MFR Part #: EDHC34
Samy's Part #: EDWAEDHC34
Test your fixer with one or two drops of the Edwal Hypo Check for exhaustion due to silver saturation. If it produces a cloudy precipitate, the bath is exhausted and the fixer should be discarded.
Features:
- No harm has been done to the bath.
- A 3/4 oz. bottle provides about 800 tests.
Availability: On Backorder
MFR Part #: Z864O
Samy's Part #: S-037623
Inkodye is an amazing way to print t-shirts and textiles. Its color develops and binds permanently when exposed to bright sunlight or UV.
Inkodye can be brushed, rolled, dipped, stamped, stenciled, screen printed, and more! Inkodye binds permanently to any natural fabric such as cotton, rayon,...
Inkodye can be brushed, rolled, dipped, stamped, stenciled, screen printed, and more! Inkodye binds permanently to any natural fabric such as cotton, rayon,...
Availability: In Stock
MFR Part #: 20310
Samy's Part #: CPMD20310
Classic black, multi-layered focusing/field cloth is constructed of breathable 100% American cotton, making it cooler, lighter, more durable and snag resistant than conventional double-knit polyesters. One edge is covered with a Velcro strip, allowing the cloth to close around the largest camera...
MFR Part #: 11140
Samy's Part #: CPMD11140
128 ounces (1 gallon) High density, brown polyethylene. Infrared sterilized, silk screened in epoxy ink, with Polydome(tm) linerless closures.
Availability: In Stock
MFR Part #: DL0184P
Samy's Part #: DOTLDL0184P
The Dotline 2 in. DLC Stainless Dial Thermometer features a large luminous 2 in. (50mm) dial. It reads from 14-140°F and from 10-60°C.
- Accurate readings
- Long stem for beaker use
- Luminous dial
Availability: In Stock
MFR Part #: 35110
Samy's Part #: CPMD35110
The CPM Delta Red Junior Safelight 11 Watt is an economical safelight that is scratch resistant, fade-proof, and safely provides many times more light than conventional directional type safelights.
Availability: In Stock
MFR Part #: Z864S
Samy's Part #: S-037628
Inkodye is an amazing way to print t-shirts and textiles. Its color develops and binds permanently when exposed to bright sunlight or UV.
Inkodye can be brushed, rolled, dipped, stamped, stenciled, screen printed, and more! Inkodye binds permanently to any natural fabric such as cotton, rayon,...
Inkodye can be brushed, rolled, dipped, stamped, stenciled, screen printed, and more! Inkodye binds permanently to any natural fabric such as cotton, rayon,...
MFR Part #: Z870ML
Samy's Part #: S-037634
The Lomography Stenoflex Mini Labo Black is a simple box pierced with a tiny hole to allow light to enter. Put a sheet of photosensitive paper inside the darkroom and expose it to your subject. Stenoflex lets you reproduce the single steps of black and white photography, from taking photos to...
Availability: In Stock
MFR Part #: DIFFUSION-FLUID-GALL
Samy's Part #: S-043969
The Reel EFX 1 Gallon Diffusion Fluid for DF-50 Diffusion Hazer is odorless and leaves no residue when used properly. It is dispensed with a machine utilizing a triple filtered system that breaks down the Diffusion Fluid to a uniform 1 micron sized droplet for best effects.
Features:
- Safest,
Availability: On Backorder
MFR Part #: Z864C
Samy's Part #: S-037622
Inkodye is an amazing way to print t-shirts and textiles. Its color develops and binds permanently when exposed to bright sunlight or UV.
Inkodye can be brushed, rolled, dipped, stamped, stenciled, screen printed, and more! Inkodye binds permanently to any natural fabric such as cotton, rayon,...
Inkodye can be brushed, rolled, dipped, stamped, stenciled, screen printed, and more! Inkodye binds permanently to any natural fabric such as cotton, rayon,...
MFR Part #: SE603
Samy's Part #: SEALSE603
ColorMount , the world's largest-selling adhesive, is a porous tissue, coated on both sides with a permanent adhesive. Its "breathability" makes it ideal for both non-porous and porous materials. Activated at low temperatures (175-200oF), ColorMount is perfect when you need speed and accuracy....
MFR Part #: 15508174
Samy's Part #: FUJI15508174
Fujifilm CN-16/C-41 Control Strips - 50 Count are available for the CN-16/C-41 and FA/RA-4 chemical processes. Keeps your chemistry in-line to produce high quality negatives and prints.
Availability: On Backorder
MFR Part #: Z862
Samy's Part #: S-037611
The Lumi Shadow Printing kit is a water-based dye that develops and fixes magically in sunlight, making it easier than ever to personalize your home and wardrobe. Anything that casts a shadow can make beautiful prints! You can use different objects like paper clips, push pins or any object you like to block...
Availability: In Stock
MFR Part #: 15120
Samy's Part #: CPMD15120
Perfect for photo optics/equipment. Safe, ultra soft, lasts for years. The photo standard for 50+ years.
Availability: In Stock
MFR Part #: Z860
Samy's Part #: S-037609
The Inkodye Photo Printing Kit from Lumi is a great, inexpensive alternative to screen-printing. Inkodye is a light-sensitive textile dye that allows the printing of photographic images and photograms on treated fabrics with exposure by sunlight. The dye is specifically designed for use with natural...
MFR Part #: Z861
Samy's Part #: S-037610
This Lumi Inkodye Sunfold Printing Kit takes the hassle out of tie-dye, with sunlight-activated Inkodye and simple step-by-step instructions.
Ideal for groups, this kit makes at least 16 prints (12x12 inches). You can also dilute Inkodye with up to 10 parts water to extend its power and create...
Availability: In Stock
MFR Part #: 11120
Samy's Part #: CPMD11120
The 32 oz Datatainer from Delta 1 is a brown chemical storage container made of opaque high-density plastic with liquid level clear measuring stripe. The bottle features a memo area for information about the contents the user wishes to put into the container. The Datatainer comes with a leak...
Availability: In Stock
MFR Part #: DL6810
Samy's Part #: DOTLDL6810
A deluxe, high grade extra-rigid developing tray. Features pouring spout, three slots for thermometer or print tongs. Ribbed bottom.
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE