MFR Part #: 4711
Samy's Part #: S-064359
The Westcott Sony Adapter for FJ-X2m Flash Trigger pairs the FJ-X2m Universal Wireless Trigger and a Sony camera to maximize the FJ400 strobe's full potential. The adapter is durable and lightweight with integrated hot shoes for connecting the FJ-X2m.
Availability: Backordered
$1990
MFR Part #: DL0424P
Samy's Part #: DOTLDL0424P
$749
MFR Part #: DL0423P
Samy's Part #: DOTLDL0423P
Converts hot shoe to PC (F). For cameras with no PC connection, but with hot shoe.
Availability: In Stock
$1495
MFR Part #: PMB6C
Samy's Part #: PARAPMPCMMP
The Paramount Cords 2-6C Household to PC Male (Coiled 21 In. to 5 ft.) is coiled heavy duty sync cord used to connect flash with a female PC receptor, a camera, sync extension or triggering device that has a female PC terminal. The cord extends from 21 inches to 5 feet long when required.
Features:...
Availability: Special Order
MFR Part #: PH15653
Samy's Part #: S-041886
Control multiple Hot Shoe Flashes, multiple manual studio lights, or a combination of both by providing a choice of four channels over four separate groups. The Phottix Strato II Wireless Multi 5-in-1 Trigger Set can be used as a wired or wireless shutter release. The 2. 4 GHz. transmitter and...
Availability: Special Order
MFR Part #: 434
Samy's Part #: QUAN434
1.5 foot (0.5m) Replacement Cord for FreeXwire radio slaves, 405T Transmitter.
Availability: Special Order
MFR Part #: DL0430P
Samy's Part #: DOTLDL0430P
The Dot Line DL-0430 is a 15 feet Male PC to Male PC Straight Flash Cord.
Availability: In Stock
$999
MFR Part #: 804408
Samy's Part #: LPAD804408
Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 16" straight Miniphone to Miniphone Cable.
Availability: In Stock
$899
MFR Part #: 804415
Samy's Part #: LPAD804415
This Paramount Cords ME1-8P Connection Cable is a 16" long cable that features a Miniphone plug at one end to connect to the receiver, and a Metz "8-pin" plug at the other end, for Metz 45CT-5, 60CT-1 and 2 flash units.
Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$3295
MFR Part #: PH17320
Samy's Part #: S-044900
The Phottix N8 Extendable Spiral Cable for Select Nikon Kodak and Fuji Cameras (3.3 ft.) connects compatible Phottix products to Nikon, Kodak and Fuji cameras. It is high quality cable for connecting Phottix products such as Cleon II, Plato and Strato Series Flash triggers to cameras.
Features
...
Availability: Special Order
MFR Part #: PH17350
Samy's Part #: S-044901
The Phottix C8 Extendable Spiral Cable for Select Canon EOS Cameras (3.3 ft.) connects compatible Phottix products to compatible Canon cameras. High quality cable for connecting Phottix products such as Cleon II, Plato and Strato Series Flash triggers to cameras.
Features:
- Extendable to 1m
Availability: Special Order
MFR Part #: 804410
Samy's Part #: LPAD804410
Electronic Flash and Motor Drive Cables for Canon T-3, Bronica 6X6 & 645, Hasselblad SCA 390 Module, Metz 32 CT, Z, MZ, 34 CS2, 40MZ, 50 MZ, 20BC-6, 28C-2, 54 MZ-3, 70 MZ-3 & 5 and Standard SCA Adapter.
Please Note: Old inventory, New but packaging may show signs of age.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$1000
MFR Part #: 804514
Samy's Part #: LPAD804514
Motor drive cords connect to the camera's remote cable socket, and enable the Pocket Wizard radio slave to trigger the camera's shutter remotely. This pre-trigger cable is designed to keep the camera constantly "awake", and has the same effect as holding the camera's trigger button pressed down...
Availability: In Stock
MFR Part #: DL0422P
Samy's Part #: DOTLDL0422P
$799
MFR Part #: 804403
Samy's Part #: LPAD804403
Availability: Backordered
$1250
MFR Part #: 804304
Samy's Part #: LPAD804304
Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 10' straight PC to Miniphone Cable.
Availability: In Stock
$1800
MFR Part #: 804401
Samy's Part #: LPAD804401
Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 10' straight Miniphone Male to Miniphone Female Extension Cable.
Please Note: Old inventory, New...
Availability: In Stock
$1999
MFR Part #: 804406
Samy's Part #: LPAD804406
Availability: In Stock
$1195
MFR Part #: 804502
Samy's Part #: LPAD804502
The PocketWizard Motor Drive Cable Canon EOS T3 Connector to Miniphone enable the PocketWizard radio slave to trigger the camera's shutter. This cable is 3' long.
Works With:
- Canon EOS Rebel T3
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
MFR Part #: 804603
Samy's Part #: LPAD804603
The Pocketwizard | Trigger Button to Miniphone Straight Cable is 16" long and features a push button at one end, and a Miniphone plug at the other end. This makes it possible to trigger a transmitter or transceiver remotely.
Please Note: Old inventory, New but packaging may show signs of age.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$3695
MFR Part #: 452
Samy's Part #: QUAN452
Motor drive cord connects to the camera's remote cable socket, and enables a Quantum Radio Slave or FreeXwire unit to trigger the camera's shutter.
This cable will trigger for Hasselblad ELM, ELX compatible with 405, 505, 505i
Availability: In Stock
MFR Part #: 435
Samy's Part #: QUAN435
Radio Slave Sync Cord - 4' Sync-In Coil Cord Freewire (from Camera PC to FreeWire Sync-In) for use with Radio Slave Transmitter.
Please Note: Old inventory, New but packaging may show signs of age.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$2995
MFR Part #: 515
Samy's Part #: QUAN515
This AC adapter will supply AC power to the Radio Slave 4i (505i). US plug version (115 VAC).
Availability: In Stock
MFR Part #: 451
Samy's Part #: QUAN451
Motor drive cords connect to the camera's remote cable socket, and enables a Quantum Radio Slave or FreeXwire unit to trigger the camera's shutter.
This cable will trigger Nikon 2-pin cameras, F4/4s and F3 series when used with MD-4 Motor Drive, FM2 with the MD-12 Motor Drive, or N70 & N8008.
Availability: In Stock
MFR Part #: 802451
Samy's Part #: LPAD802451
The Pocket Wizard Flash Confirmation Cable indicates that a flash connected to your MultiMax Transceiver actually fired. By utilizing a shielded high intensity light sensor, which only remains active during the brief radio transmitting time, it confirms only if the attached flash fired or not....
Availability: In Stock
MFR Part #: 804701
Samy's Part #: LPAD804701
Non-Metallic Mounting bar for PocketWizard Products to Super Clamps (with Velcro or 1/4-20 plate)
Please Note: Old inventory, New, but packaging may show signs of age.
Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$1595
MFR Part #: PMPWMH1
Samy's Part #: PARAPMPWMH1
This Paramount 16" straight Household Male to Male Miniphone sync cord enables firing of a strobe head or power pack that accepts a male household style plug, from a Pocket Wizard Radio Slave Receiver or transceiver.
Availability: Special Order
MFR Part #: PMPWMPCF
Samy's Part #: PARAPMPWMPCF
The Paramount PW-MPCF Adapter is a molded piece that features a female PC tip on one side, and a mini-phone plug on the other side. This will allow a sync cord ending in a male PC tip to connect to equipment with a Monophone socket.
Availability: In Stock
$1995
MFR Part #: 2118
Samy's Part #: S-020748
The JTL Lighting DigiFirer Radio Receiver is a digitized radio trigger system designed for photographic studios and on-location work. The receiver is attached to your light and accepts the signal from The Digifirer trigger. This receiver straps onto your light, with an included mini plug adapter...
Availability: In Stock
$1999
MFR Part #: QR2
Samy's Part #: S-039674
This Induro 2.4" QR2 Slide-In Quick Release Plate for DM-Series Heads is for use with the DM-series ballheads, this plate is compatible with the smaller DM-01 or DM-12 ballheads and it comes with a 1/4"-20 camera screw with non-skid strips.
Features:
- Hi-profile design
- Arca-Swiss style compatible
Availability: Special Order
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE