CONTACT US AT 800-321-4726
Belts & Modular Components
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 361004
Samy's Part #: S-047793

This BlackRapid Double Slim Breathe Camera Harness is designed to carry two cameras by hanging from the right and left shoulders. The harness is comfortable to wear due to its resilient and breathable mesh pads even connected to two large cameras with their attached lenses. The mesh pads design op...
Availability: In Stock
$13495
QTY
MFR Part #: 170
Samy's Part #: S-051375

The Spider Camera Holster SpiderLight Dual Camera System builds off of our Single Camera System, to provide pro photographers with the ability to holster two mirrorless or lightweight DSLR cameras. The hip-mounted holster is used to wear camera on waist like a cowboy instead of having two cameras...
MFR Part #: PLM1
Samy's Part #: S-036618

The Peak Design MICROplate is made for slim-body camera users that require a quick-release plate with a very small footprint to avoid obstruction of the lens or battery compartment. ARCA-type tripod compatible, slides into Capture® in 2 directions and has 1 loop for hand straps or Peak Design...
Availability: In Stock
$1995
QTY
MFR Part #: KSWB1
Samy's Part #: S-055111

Redefining comfort and ease of operation, the K-Tek Stingray Waistbelt for Small Audio Mixer/Recorder Bags is designed specifically for smaller gear packages centered around the Sound Devices 633, the Zaxcom Maxx or similar sized mixer / recorders. The KSWB1 is the perfect companion for the Stingray...
Availability: On Backorder
$7900
QTY
MFR Part #: 686GREY
Samy's Part #: S-053161

The Cotton Carrier CCS G3 Harness-1 (Gray) is designed for the active photographer. The harness supports and secures one camera with a long lens, keeping it always at the ready. The ergonomic design of this camera vest carrier distributes the weight of the camera helping to lessen the fatigue...
MFR Part #: 005
Samy's Part #: S-056665

The Think Tank Photo Pro Speed Belt V3.0 (27-34 in. Waist, Black) is a fully padded waistbelt for the Modular Component System.

FEATURES:

Ability to Rotate or Lock components on the belt

Compatible with Keep It Up strap and Pixel Racing Harness V3.0

Integrates with most Think Tank backpacks

Allows...
Availability: In Stock
$4175
QTY
MFR Part #: SW05520
Samy's Part #: SETWSW05520

Setwear's 2" Padded Belt offers comfort and support while maintaining durability. Its 2" wide, soft, padded belt with adjustable waist enhances comfort while working. The quick release buckle lets you put on, and take off this belt as needed.
Availability: On Backorder
$1995
QTY
MFR Part #: SW05515
Samy's Part #: SETWSW05515

Setwear's Jumbo AC Pouch was designed, created and tested by people who work in the industry. This tough versatile pouch carries everything you need. It holds sharpies, pens and pencils of all types and sizes. It has a special compartment for your Mini-Mag Light with hook and loop flap over design....
Availability: In Stock
$2495
QTY
MFR Part #: CP-BK-3
Samy's Part #: S-055060

The Peak Design Capture Camera Clip v3 (Black) is the most secure, convenient, accessible way to carry your camera, period. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly...
Availability: In Stock
$6995
QTY
MFR Part #: 871
Samy's Part #: S-008214

The Think Tank Digital Holster 30 V2.0 is designed for regular size DSLRs such as the Canon 5D Mark II, 7D, and 50D or Nikon D700, D300s, and D90. The Holster can carry a 70-200 f2.8 with the lens hood either reversed or in position, ready to shoot.

FEATURES:
"Pop Down" increases bag height...
Availability: In Stock
$7975
QTY
MFR Part #: 150
Samy's Part #: S-051373

The Spider Camera Holster SpiderLight Holster and Plate Box Set is the best holster on the planet for mirrorless and lightweight cameras. Slip it right on your belt, attach our Spider plate to your camera, and shoot like a pro. This camera holster is lightweight, durable and extremely versatile. The SpiderLight...
MFR Part #: 147GREY
Samy's Part #: S-053162

This Cotton Carrier CCS G3 Harness-2 (Gray) for two cameras is designed for the active photographer. The harness and side holster supports and secures 2 cameras and lenses. Work for longer periods of time without needing to go back to a camera bag for more gear. The ergonomic design of this two...
Availability: In Stock
$15900
QTY
MFR Part #: SW05514
Samy's Part #: SETWSW05514

Setwear's Combo Tool Pouch was designed, created and tested by people who work in the industry. This great combo tool pouch holds a variety of tools for all sorts of needs. It can carry up to a 33' tape measure, gloves, with a convenient glove clip on the side, and almost anything that will fit...
Availability: In Stock
$2695
QTY
MFR Part #: 200
Samy's Part #: S-058453

Designed by photographers, the newly-redesigned Spider Camera Holster SpiderPro Single Camera System v2 is the perfect tool for the professional sport, wedding or event photographer looking for a strap-free carrying solution. Take the weight of your camera off your neck and shoot longer without...
Availability: On Backorder
$15000
QTY
MFR Part #: 886
Samy's Part #: S-044042


The new and improved Think Tank Photo Digital Holster Harness V2.0 (Black) highlights the innovative designs Think Tank Photo has become known for. Some chest mounted bags tend to sag or shift weight on very active photographers. The Digital Holster Harness V2.0 has six attachment points to each

...
$3575
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 160
Samy's Part #: S-051374

The Spider Camera Holster SpiderLight Single Camera System is specially designed for the seasoned Mirrorless photographer. The SpiderLight Single Camera System includes a belt, holster, camera plate, pin, and a 1/8" hex wrench. Our durable SpiderLight Holster attaches to our slim and ergonomic...
MFR Part #: SW05532
Samy's Part #: SETWSW05532

This clip fits belts up to 3" wide and secure in place with a snap of a button.
Availability: On Backorder
$795
QTY
MFR Part #: 180
Samy's Part #: S-051376

The Spider Camera Holster SpiderLight BackPacker Kit with Holster is used to carry your camera with comfort and ease. A quick snap-in connection securely fastens the SpiderLight Adapter to your bag's strap. And the ergonomic adapter shape works with the body's natural contours for optimal carrying....
MFR Part #: 011
Samy's Part #: S-056667

The Think Tank Photo Pro Speed Belt V3.0 (38-48 in. Waist, Black) is a fully padded waistbelt for the Modular Component System.

FEATURES:

Ability to Rotate or Lock components on the belt

Compatible with Keep It Up strap and Pixel Racing Harness V3.0

Integrates with most Think Tank backpacks

Allows...
Availability: In Stock
$4175
QTY
MFR Part #: 220
Samy's Part #: S-058454

Say hello to the new and improved SpiderPro Dual Camera System v2, the pro photographerâ?s solution for holstering two cameras at your hip! The improved Pro2 Plate attaches to any professional DSLR. Redesigned for a more balanced and comfortable carry, the plate also features an improved, more
...
Availability: On Backorder
$26500
QTY
MFR Part #: 008
Samy's Part #: S-056666

The Think Tank Photo Pro Speed Belt V3.0 (32-42 in. Waist, Black) is a fully padded waistbelt for the Modular Component System.

FEATURES:

Ability to Rotate or Lock components on the belt

Compatible with Keep It Up strap and Pixel Racing Harness V3.0

Integrates with most Think Tank backpacks

Allows...
Availability: In Stock
$4175
QTY
MFR Part #: CC-BK-3
Samy's Part #: S-055062

The Peak Design Clip for Capture v3 (Black) is finally here, thanks to feedback and suggestions from our customers. It's exactly what it sounds like-a Capture clip without a camera plate-for those only in need of an additional clip. Perhaps you have multiple backpacks or bags that you're looking...
Availability: In Stock
$4995
QTY
MFR Part #: T0300-1919
Samy's Part #: S-039118

Belts come in every shape and size, and are used for everything from propelling high-power motors to keeping your pants from falling off. While each serves well in its realm of existence, rarely are they able to perform tasks outside their designed purpose. The Tamrac Anvil T0300 M.A.S. & M.O.L.L.E...
MFR Part #: CPS3
Samy's Part #: S-055061

The Peak Design Capture Camera Clip v3 (Silver) is the most secure, convenient, accessible way to carry your camera, period. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly...
$6995
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: T0305-1919
Samy's Part #: S-039119

Belts come in every shape and size, and are used for everything from propelling high-power motors to keeping your pants from falling off. While each serves well in its realm of existence, rarely are they able to perform tasks outside their designed purpose. The Tamrac Anvil T0305 M.A.S. & M.O.L.L.E...
MFR Part #: KSWB1
Samy's Part #: S-047519

The K-Tek KSWB1 Stingray Waistbelt for Small Audio Mixer/Recorder Bags is the perfect companion for the Stingray Junior or the Stingray Small Audio Bags. The waist belt has an inner belt which keeps the belt secure with or without the mixer bag. This is facilitated via one quick buckle on each...
Availability: In Stock
$7505
QTY
MFR Part #: SW05513
Samy's Part #: SETWSW05513

Setwear's Tool Pouch was designed, created and tested by people who work in the industry. This pouch is great for holding small tools that can fit inside a 7.5" x 6.5" area. Its a great low key design so it will stay out of your way and give you room to work without obstruction. Easy front pocket...
Availability: In Stock
$2395
QTY
MFR Part #: CCS3
Samy's Part #: S-055063

The Peak Design Clip for Capture v3 (Silver) is finally here, thanks to feedback and suggestions from our customers. It's exactly what it sounds like-a Capture clip without a camera plate-for those only in need of an additional clip. Perhaps you have multiple backpacks or bags that you're looking...
$4995
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: SW05529
Samy's Part #: SETWSW05529

Setwear's Radio Pouch is designed, created and tested by people who work in the industry. These top quality pouches hold many different size radios, so no matter what size you have it'll always fit securely so you won't have to worry about loosing it.
Availability: In Stock
$2195
QTY
MFR Part #: 881
Samy's Part #: S-008216

The Think Tank Digital Holster 50 V2.0 is designed for pro size DSLRs such as the Nikon D3 series or the Canon 1D and 1Ds series. This is a top loading bag for a pro size DSLR that can carry a 70-200 f2.8 with the lens hood either reversed or in position, ready to shoot.

FEATURES:
  • "Pop Down"
...
Availability: On Backorder
$8975
QTY
MFR Part #: LHS03
Samy's Part #: S-010559

With its sturdy construction, molded foam insulation, and high-quality elastic side panels, the Lite Holster Stretch keeps flashlights of nearly every size safe at your side. In its relaxed state, a mini AAA flashlight is snug and secure, and the panels expand to provide a close fit for larger...
Availability: In Stock
$899
QTY
MFR Part #: SB3-03-11
Samy's Part #: S-024677

Made of high quality, weather-resistant stainless steel, this ultra-handy accessory with its dual spring gates will hold, secure, and connect everything from house keys and cell phones to technical camping gear. Attach valuables to the center bar for ultimate security, link gate ends to a second...
Availability: In Stock
$299
QTY
MFR Part #: 1301262
Samy's Part #: OPTE1301262

The 3/8" System Connectors - XL (Set of 2) are spare connectors designed for adjustable 3/8" QD straps. The connectors can be used to lengthen the strap to be worn across the chest or shortened to be worn at chest level. A small carrying handle can be created when the quick disconnects are latched...
MFR Part #: T0310-1919
Samy's Part #: S-039120

Belts come in every shape and size, and are used for everything from propelling high-power motors to keeping your pants from falling off. While each serves well in its realm of existence, rarely are they able to perform tasks outside their designed purpose. The Tamrac Anvil T0300 M.A.S. & M.O.L.L.E...
MFR Part #: T0380-1919
Samy's Part #: S-040361

Belts come in every shape and size, and are used for everything from propelling high-power motors to keeping your pants from falling off. While each serves well in its realm of existence, rarely are they able to perform tasks outside their designed purpose. The Tamrac Anvil T0380 M.A.S & M.O.L.L.E...
MFR Part #: KRB0301
Samy's Part #: S-010570

Made of high quality stainless steel, the S-Biner Key Rack + Bottle Opener (Black) has a secure gate closure on one end, allowing you to clip your keys to an existing key ring, belt loop, purse strap, zipper pull-anything with a loop or D-ring. Its interior is designed to serve as a handy bottle...
Availability: In Stock
$549
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]