CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Quantum Instruments
MFR Part #: QF72
Samy's Part #: QUANQF72

The Multi Bracket is used to mount Qflash in the center of an umbrella, to mount Qflash in a light box, and to mount a Radio Slave with Qflash either as a remote stationary flash or roving flash. The "L" bracket has threaded holes for 1/4" and 3/8" threads.

Bracket tilts and swivels to

...
Availability: In Stock
$5295
QTY
Custom Brackets
MFR Part #: FM
Samy's Part #: CUSTFM

The Custom Brackets Flash Mounting Plate is for Metz 50mz and 70 mz series handle mount flashes.

Please Note: Old inventory. New, but packaging may show signs of age.

Availability: In Stock
$900
QTY
Custom Brackets
MFR Part #: FN
Samy's Part #: CUSTFN
The Custom Brackets Flash Mounting Plate FN for Norman Flash Heads with 1/4"-20 Thread is designed to be used with all Norman portable flash heads that have a 1/4"-20 threaded base
Availability: In Stock
$1000
QTY
Custom Brackets
MFR Part #: FS
Samy's Part #: CUSTFS
The  Custom Brackets Flash Mounting Plate FS is designed for Sunpak handle mount flashes.
Availability: In Stock
$1000
QTY
Custom Brackets
MFR Part #: FTJR
Samy's Part #: CUSTFTJR

The Custom Brackets FT-JR Flash Shoe Mount attaches your shoe mount flash to the CB Junior, CB Digital-T, and CB Digital-S flash brackets. It can also be used as an anti-twist for the Canon Off Camera Cord II.

Note: Requires a SP-551 Custom Brackets CB Junior Flash Screw if being used on a Digital...
Availability: In Stock
Ships next business day
$900
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: LF
Samy's Part #: CUSTLF

The Custom Brackets Flash Bracket Adapter is specifically designed to allow the flash to move 1, 2, or 3 inches forward for giving the room to look into the view finder when using waist level cameras. The adapter is useful for 35mm to balance in standing when using different lenses.

Features:
...
Availability: In Stock
$1000
QTY
Custom Brackets
MFR Part #: QR
Samy's Part #: CUSTQR
The Custom Brackets QR Tripod Quick Release is a must for taking full advantage of one of the main features of the Custom Bracket systems when using a tripod. When the QR tripod quick release receiver clamp is attached to a tripod it allows quick and easy mounting and unmounting of the bracket...
Availability: In Stock
$3000
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: AP
Samy's Part #: CUSTAP
The Custom Brackets Accessory Plate for Radio Slaves, TTL Modules, Focusing Lights, etc (1/4" -20) has many uses when attached to the upright of your Custom Bracket. It will support Radio Slaves, TTL Modules, Focusing Lights or any other items with 1/4"-20 screw threads.
Availability: In Stock
$1000
QTY
Custom Brackets
MFR Part #: AP1
Samy's Part #: CUSTAP1

The Custom Brackets AP1 Accessory Plate for Custom Brackets Digital PRO has many uses when attached to the upright of your Custom Brackets Digital PRO Bracket. It will support Radio Slaves, TTL Modules, Focusing Lights or any other items with 1/4"-20 screw threads.

Features:
  • Support Radio Slaves,
...
Availability: In Stock
$1000
QTY
Custom Brackets
MFR Part #: AT
Samy's Part #: CUSTAT

The Custom Brackets AT Anti Twist Bar screws onto the side of the CB Digital-T and CB Digital-S camera platform to prevent the camera from twisting and coming loose from its connection.
Availability: In Stock
$900
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: CBDIGITALS
Samy's Part #: CUSTCBDIGITALS

The CB Digital-S Flash Rotating Camera Bracket from Custom-Brackets is a simple and easy-to-use bracket that features a 180° pivoting flash arm that keeps the flash centered above the lens in both horizontal and vertical positions.

The CB Digital-S model is built from black anodized aluminum, with...
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$3995
QTY
Custom Brackets
MFR Part #: CBDIGITALT
Samy's Part #: CUSTCBDIGITALT
The CB Digital-T Flash Rotating Camera Bracket from Custom-Brackets is a simple and easy-to-use bracket that features a 180° pivoting flash arm that keeps the flash centered above the lens in both horizontal and vertical positions.

The CB Digital-T model is built from black anodized aluminum, with...
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$4995
QTY
Custom Brackets
MFR Part #: STRAP
Samy's Part #: CUSTSTRAP

A Velco adjustable leather strap. The strap adds insurance for holding and carrying your brackets. It replaces the original handle and still allows the handle to be indexed for your comfort.

  • For - QRS-H2, QRS-E2, QRS-35-H, QRS-35-EV, QRS-35-PJ, QRS, QRS-EV, QS, QRS-AF
Availability: In Stock
$1500
QTY
Custom Brackets
MFR Part #: CM1
Samy's Part #: CUSTCM1
The Custom Brackets Camera Mounting Plate CM-1 will mount the Mamiya 645 AFD, AF, Pro TL, Pro, or Super models to the following medium format camera brackets: the QRS, QRS-AF, QRS-EV and the QRS-SV.
Availability: In Stock
$1500
QTY
Notice: This item is non-returnable
$900
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: CP
Samy's Part #: CUSTCP
Availability: In Stock
$1500
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: CP1
Samy's Part #: CUSTCP1
The Custom Brackets Camera Mounting Plate CP-1 for Original Pentax 6x7 Cameras (not 67II) is specifically designed for use with the original Pentax 6x7 camera (not 67II).

Note: Works on QRS, QRS-AF, QRS-EV, QRS-SV.
Availability: In Stock
$1200
QTY
Custom Brackets
MFR Part #: FL
Samy's Part #: CUSTFL

The Custom Brackets Flash Mounting Plate FL for Lumedyne is specifically designed to use with all Lumedyne flash heads. The plate is classic series (Round flash head type) and is for Digital PRO-M, Digital PRO, QRS-H2, QRS-E2, QRS-2 brackets.

Features:
  • For Digital PRO-M, Digital PRO, QRS-H2,
...
Availability: In Stock
$1000
QTY
Stroboframe
MFR Part #: 300100
Samy's Part #: STRO300100
The Stroboframe VH2000 is an ultra-compact, "gripless", flash rotating bracket. It cradles the camera unobtrusively while maintaining an over-the-lens flash position with a design that lets you hold the camera rather than a grip, and rotate the flash for horizontal or vertical composition. What's...
Availability: In Stock
$4999
QTY
Notice: This item is non-returnable
Stroboframe
MFR Part #: 310800EX
Samy's Part #: STRO310800

The Digital Pro-T and Digital Press-T are flash-rotating brackets. Both are light, compact and fast-handling. The flash arm swings to keep the flash arm swings to keep the flash centered over the lens for both horizontal and vertical compositions. These brackets do not require the use of cable...
Availability: Special Order
$4900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Stroboframe
MFR Part #: 300405
Samy's Part #: STRO300405
Like the bracket Shoe Mount (300-SHO), but without a bracket-locating pin. The Universal Shoe Mount is a special version supplied with a 1/4"-20 knob for general purpose photo applications. It mounts to light stands or flat surfaces, can be used to upgrade non-Stroboframe flash brackets or mounted...
Availability: In Stock
$399
QTY
Stroboframe
MFR Part #: 300BE1
Samy's Part #: STRO300BE1
Cameras mounted to flash brackets of any brand tend to twist or rotate on the camera mounting screw. Cork or rubber friction pads help, but the real solution is to use a camera-specific Anti-Twist Plate. They act as an interface between the camera and bracket, pin-register to the bracket and conform...
Availability: In Stock
$499
QTY
Stroboframe
MFR Part #: 300SHO
Samy's Part #: STRO300SHO
Stroboframe Bracket Shoe Mount Featuring a clamping-style lock, this mount securely holds the heaviest shoe units. It will not loosen up even under the most rigorous use, and a locating pin ensures that it won't twist on the bracket. The Bracket Shoe Mount attaches with the bracket's mounting...
Availability: In Stock
$399
QTY
Custom Brackets
MFR Part #: CBP
Samy's Part #: CUSTCBP

The Custom Brackets CBP Camera to Tripod Quick Release Bottom Plate for CMP Plate, when Used with QR-C and QR is a plate that attaches to the bottom of the CMP Universal Camera Plate. If the CMP is equipped with the QR-C plate it will be possible to quickly remove the camera from the bracket....
Availability: In Stock
Ships next business day
$1600
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: CK500
Samy's Part #: CUSTCK500

The Custom Bracket CK-500 Arca Swiss Plate will convert any Custom Bracket featuring a proprietary quick release to fit any Arca-Swiss type quick release system (e.g. Arca-Swiss, Foba, Graff, Wimberley, etc.).
Availability: In Stock
$1700
QTY
Custom Brackets
MFR Part #: CSP
Samy's Part #: CUSTCSP

Attaches a C35 camera plate to a QR-C (Camera Quick-Release). Required: Camera plate (one for each camera) and QR-C (Camera Quick-Release). Compatible Brackets: All Digital and 35mm Camera Rotating.
Availability: In Stock
$800
QTY
Custom Brackets
MFR Part #: QRC
Samy's Part #: CUSTQRC

The Custom Bracket| QR-C Camera Quick Release Receiver requires a Camera plate (any camera mount) and the C-SP Camera Quick Release Subplate (One C-SP for each camera plate). The QR-C Camera Quick Release is Compatible with all digital and 35mm Camera Rotating brackets from Custom Brackets. The...
Availability: In Stock
$2400
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: QRCKIT
Samy's Part #: CUSTQRCKIT

The camera quick release and subplate kit is a must for taking full advantage of bracket systems. This system will allow you to quickly mount different camera makes and models (with different heights) to your bracket. This system will allow you to quickly mount different camera makes and models...
Availability: In Stock
Ships next business day
$4000
QTY
Notice: This item is non-returnable
Custom Brackets
MFR Part #: SP-553
Samy's Part #: CUSTSP553

The Custom Brackets Screw for CB Mini Bracket is a replacement screw for CB Mini & CB Mini-RC. 1/4" x 20 thread having screwdrivers Slot head. The screw is made of stainless steel material for long life and durability.

Features:
  • Made of stainless steel material for long life and durability
...
Availability: In Stock
$400
QTY
Notice: This item is non-returnable
Dot Line
MFR Part #: DL0307P
Samy's Part #: DOTLDL0307P

Deluxe bracket, metal construction. Folds to compact size. Rubber platform to hold camera. Accessory shoe for flash. Locking screw makes bracket truly solid "L" shape when in use.
Availability: In Stock
$1295
QTY
Dot Line
MFR Part #: DL0308P
Samy's Part #: DOTLDL0308P

Deluxe metal construction. Rubber platform to hold camera with plastic hand grip and strap.
Availability: Special Order
Dot Line
MFR Part #: DL0310P
Samy's Part #: DOTLDL0310P

Sturdy metal bracket for cameras and flash units enable flash to be mounted on the side or on the top. Two accessory shoes for lights, mic, etc.
Availability: In Stock
$1495
QTY
RPS Studio
MFR Part #: RSBK2
Samy's Part #: DOTLRSBK2P

This is a very versatile bracket as it is perfect for use as either a video bracket or a flash bracket. The 3 accessory shoes allow the placement of the light as desired. If doing video, a microphone can also be added. The bracket is sturdy and it's compact size makes it easy to use.
Availability: In Stock
Ships next business day
$2495
QTY
Nikon
MFR Part #: 4763
Samy's Part #: NIKO4763

For mounting remote Nikon Speedlights when used for wireless operation, can be attached to a tripod or light stand. Compatible with SB-800, SB-600, SB-80DX, SB-28DX, SB-28, SB-26, SB-25, and SB-24.
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$895
QTY
Nikon
MFR Part #: 4951
Samy's Part #: NIKO4951

Replacement or spare stand for the Nikon SB-900 Speedlight enabling the flash to be used off-camera in wireless mode.
Availability: In Stock
Ships next business day
$895
QTY
Custom Brackets
MFR Part #: CBFOLDINGT
Samy's Part #: S-000874

Addition of a fold-up feature to the very popular CB Digital-T makes the CB Folding-T a must-have bracket. Pushing two buttons allows the bracket to be folded and easily stored in any camera bag. With a grip suited for both right and left-handed photographers, this bracket accommodates tall...
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$7495
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]