MFR Part #: 350584
Samy's Part #: MATT350584
Availability: More In Transit
$2320
MFR Part #: 237
Samy's Part #: MANF237
A flexible arm designed to be used with the super clamp system. The Flexarm can hold light weight fixtures or props and be easily moved and held in place without having to lock any knobs. Flexible arm, 1/2" diameter, 21.6" long with hexagonal stud to fit Super Clamp 2915. 3/8" female thread on one end...
Availability: More In Transit
$2288
MFR Part #: 196B2
Samy's Part #: MANF196B2
A more versatile version with telescopic features that make this product even more compact than before. Allows easier positioning of lighting fixtures even in awkward and tight spaces. (Replaces the 2935 Articulated Arm).
Maximum Length is 23.8 inches, and the bottom 5/8" spigot (compatible with...
Availability: Special Order
MFR Part #: 237HD
Samy's Part #: MANF237HD
A flexible Heavy Duty arm designed to be used with the super clamp system. Similar to the 2896 Flex Arm but with a larger diameter of .7". The Flexarm can hold light weight fixtures like a 150W Fresnel or props and be easily moved and held in place without having to lock any knobs.
Flexible arm, 1/2" diameter, 2...
Availability: More In Transit
$3188
MFR Part #: 155
Samy's Part #: MANF155
Twin swiveling 5/8" spigots and single lever lock Supplied with Camera Bracket 2933 Height: 5.7" Maximum Load Capacity 8.9 lbs
Availability: Special Order
MFR Part #: 429596
Samy's Part #: MATT429596
The Matthews 6 In. C-Clamp with 5/8 Baby Pins has 2 separate 5/8" diameter pins at different angles so that the light fixtures may fit with minimal clearance. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures...
Availability: More In Transit
MFR Part #: 196AB3
Samy's Part #: MANF196AB3
The three-section Manfrotto 196AB-3 Articulated Arm supports 2.2 lbs @ full extension. Extra versatility is also given by the sliding extension system which allows for easier positioning of lighting fixtures even in awkward and tight spaces.
Maximum Length is 33.5 inches, and the bottom 5/8" spigot...
Availability: Special Order
MFR Part #: D520LB
Samy's Part #: AVEND520B
This 40" C-Stand Extension Arm is capable of holding light heads, flags, reflectors, or a gobo.
Availability: Special Order
MFR Part #: B655020
Samy's Part #: S-045111
The Matthews Hollywood Head and Arm (20 In. Black) is made of Stainless Steel and T-Handles is ergonomically designed to allow for fast, efficient, safe tightening with little effort. The arm features with Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an...
Availability: In Stock
MFR Part #: 042
Samy's Part #: MANF042
$1728
MFR Part #: KG204311
Samy's Part #: S-033552
The Kupo 20 In. Extension Grip Arm with Big Handle (Black) is a 2 1/2" grip head mounted on the end of a 20" piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists...
Availability: In Stock
MFR Part #: 350580
Samy's Part #: MATT350580
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
Availability: In Stock
$3600
MFR Part #: 244MINI
Samy's Part #: S-040051
The Manfrotto 244MINI Friction Arm is a versatile 24cm (9.4 ") friction arm with 1 /4" attachments on both ends and additional 3/8'' adapter included. Attachments can easily be replaced by using the included hex key and are compatible with a range of different adapters.
Features:
- Versatile
Availability: More In Transit
MFR Part #: 098B
Samy's Part #: MANF098B
MFR Part #: 339759
Samy's Part #: MATT339759
Spring loaded turtle base for use with C-stand risers, chrome.
Availability: Special Order
MFR Part #: C710200
Samy's Part #: S-009839
The Grip-Head GH-2522 "Enterprise" which will replace both the discontinued Grip-Head "The Pro" and "The Big". The Grip-Head Enterprise comes with several new and outstanding features. His two tunnel clamps are differently sized, and perfectly match both tube sizes which Sunbounce uses. Thus,...
Availability: Special Order
MFR Part #: KG701712
Samy's Part #: S-015135
The Kupo KG701512 convi clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories...
Availability: In Stock
MFR Part #: KG203711
Samy's Part #: S-022335
Kupo is introducing 40 In. Hex Grip Arm w/Big Handle, an exciting innovation in grip arm design. At the end of our 40 In. grip arm, you will find a baby hex pin with six milled flat surfaces. Now, you can mount your light fixtures or accessories on the end of your grip arm like a mini boom. They...
Availability: In Stock
MFR Part #: B655040
Samy's Part #: MATTB655040
The head on these arms now features two Holes 3/8" And 5/8", eliminating confusion. New castings offer positive lock inall directions. The strongest and most popular grip head inthe industry .
Availability: In Stock
MFR Part #: 6016
Samy's Part #: WESC6016
This is a complete Westcott Boom Arm that includes a tilt bracket to fit the top section of a heavy duty stand (diameter 1-1.25") stand. It also includes a 3.7lb adjustable counterweight.
Extends from 3.6' (1 m) to 6.3' (2 m)Counterweight adjusts along the boom to balance each load applied
Availability: In Stock
$5900
MFR Part #: KG203012
Samy's Part #: S-015124
The Kupo G203012 2-1/2 inch Grip Head (Silver) consists of a pair of rotating aluminum discs attached to a 5/8 inch (16 mm) receiver. The discs have four different sized "V" shaped jaws to accept any accessory with a 5/8 inch, 1/2 inch, 3/8 inch, 1/4 inch mounting stud or tubing. The "V" shaped...
Availability: In Stock
MFR Part #: 5571
Samy's Part #: S-035326
The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: In Stock
MFR Part #: YA040
Samy's Part #: S-034609
The Phototools 4.5" Grip Head with Junior Pin and receiver is designed to allow a junior roller stand to securely support large butterfly and overhead frames.
Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
MFR Part #: 209636
Samy's Part #: S-025434
The Matthews 2-1/2 In. Right Angle Snap-In Grip Head comes with a snap in pin attached. It requires mounting to a Mafer Clamp, Avenger, or Bogen Super Clamp. It allows the Super Mafer Clamp to be used in a vertical riser without any clearance problems.
Availability: Special Order
MFR Part #: 681012
Samy's Part #: MATT681012
The Matthews 20 In. Hollywood Gobo Arm with Grip head features the strongest Grip Head in the industry. The grip guaranteed to hold firmly, just set it and forget, it will not let the arm to slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in...
Availability: Special Order
MFR Part #: 655040
Samy's Part #: MATT655040
The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it!
Availability: In Stock
MFR Part #: DL-0320
Samy's Part #: S-022439
The new Dot Line Corp Multi-Flash Umbrella Holder is all metal and will accept up to 3 speedlights. The accessory shoes are adjustable for the size of the speedlight foot and are insulated to prevent misfires. A locking screw holds the umbrella in place. The holder accepts light stand spigots up to 5/8”...
Availability: In Stock
MFR Part #: KG203612
Samy's Part #: S-023637
The Kupo 40 In. Hex Grip Arm with Big Handle (Black) mounted on the end of a 40" piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists of a pair of rotating aluminum...
Availability: Special Order
MFR Part #: KG809012
Samy's Part #: S-019895
The Kupo Sidearm with Baby Pin Receiver is specifically designed to attach easily with C-stand's riser section to let you mount equipment at any point on your stand. It has a 5/8" male pin as well as a 5/8" female receiver at the endpoint of the arm to mount different tools without any adapters....
Availability: In Stock
MFR Part #: B429587
Samy's Part #: MATTB429587
The Matthews Gaffer Grip multi-use clamp can put small light fixtures virtually anywhere that the adjustable jaw can clamp over. The jaw is equipped with 12 rubber gripper pads that not only protect the surface being clamped but also provide greater gripping ability. Because the jaw opening is...
Availability: In Stock
$3800
MFR Part #: D200
Samy's Part #: AVEND200
Avenger's most popular grip accessory. The Avenger D200 2.5" Grip Head (Chrome) has hundreds of functions. Unlike any other grip head, the D200 utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for extra security.
Availability: In Stock
$2988
MFR Part #: 430127
Samy's Part #: MATT430127
The Matthews Hollywood Junior Offset Arm with 1-1/8" Receiver is a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set. The Baby Extendable Offset Arm terminates in double 5/8" pins and the...
Availability: Special Order
MFR Part #: MC1027A
Samy's Part #: S-053243
The Phototools 2.5" Grip Head with 5/8" Adapter has hundreds of functions. Unlike any other grip head, it utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for extra security.
Availability: In Stock
$3699
MFR Part #: 196AB2
Samy's Part #: MANF196AB2
Single articulated arm with two sections. Top attachment with a 16mm spigot 3/8" light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4" thread.
Availability: Special Order
MFR Part #: YA089
Samy's Part #: S-034618
The three-section Phototools Articulated Arm allows extra versatility, with a sliding extension system for precise positioning of a small camera, lighting fixtures, flags or other items even in awkward and tight spaces.
Both ends of the arm feature 5/8" pins; one with a 1/4"-20 female thread and...
Availability: In Stock
MFR Part #: 244MICRO-AR
Samy's Part #: S-040052
The Manfrotto 244 Micro Arm with Anti-Rotation is a versatile 15cm (5.9") friction arm with interchangeable Anti-rotation attachments and additional 3/8'' adapter included. The Anti-rotation system is compatible with Manfrotto products including 055 series, 190 series, and 386B-1 Nano Clamp. The...
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE