CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Cinevate
MFR Part #: ATLAS30RLWB47
Samy's Part #: S-015314

The Cinevate Inc Atlas 30 47" Slider with Regular Legs is a linear tracking system that can bear a load up to 30 lb (13.61 kg). It is made from a single block of aluminum and is supported by 5/8.

Features:
  • Linear Tracking System
  • Can Bear Load up to 30 lb (13.61 kg)
  • Made from a Single Block
...
Availability: In Stock
$49900
QTY
Cinevate
MFR Part #: CIDSLR000004
Samy's Part #: S-015317

Need an extra grip for your Cinevate Uno, Medusa or Proteus DSLR system? This grip can be mounted, and configured nearly anywhere on your rig. A single "Kip" handle allows you to toollessly adjust the grip in virtually any direction, angle or rotation. Hidden under the grip is a female 1/4" 20...
Availability: In Stock
$6900
QTY
MFR Part #: FCD110S
Samy's Part #: CHIEFCD110S

This is an ergonomic solution provides a broad range of motion for viewing small flat panel TVs, LCDs and monitors from multiple angles.

Formerly FCD110

* Multiple installation options and ultra smooth adjustment for viewing flexibility.
* Built-in cable management
* Perfect for home and office in...
Availability: In Stock
$4900
QTY
Foba
MFR Part #: 320643
Samy's Part #: FOBA320643


This is a Foba RODIE2 Spacer to be used with Foba Roof-Track rail systems. It is a spacer that goes between the ceiling and a ROTRO rail mount. It provides an extension of 51 - 100 cm, for less spacing use the RODIE1.

Availability: In Stock
$14602
QTY
Notice: This item is non-returnable
Matthews
MFR Part #: B6090-12
Samy's Part #: MATTB609012

The Matthews Cable Ties (12 Pack) is used for securing butterflies and overheads to frames as well as many other uses on set and on location. The ties eliminate the awkward and clumsy tying of knots and bows presently used to draw the fabric tightly across the frame.
Availability: In Stock
$2700
QTY
Notice: This item is non-returnable
Matthews
MFR Part #: B609020
Samy's Part #: MATTB609020

This 20 Pack of  Matthews Cable Ties are used for securing butterflies and overheads to frames as well as many other uses on set and on location. The ties eliminate the awkward and clumsy tying of knots and bows presently used to draw the fabric tightly across the frame.
Availability: Special Order
$3700
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Genus
MFR Part #: GLGARDNK
Samy's Part #: S-007334
The Genus GARD-NK Nun's Knickers Do-nut Adaptor Ring (so called as an industry tongue-in-cheek nick-name) is a do-nut ring fitted with a black-out fabric cover that wraps around the barrel of your lens to block out any light completely. The 105mm plastic ring fits snugly into your matte box and...
Availability: In Stock
$1000
QTY
Varizoom
MFR Part #: VZSTINGSHOT
Samy's Part #: S-009172

The VariZoom StingShot is a modular support system for video DSLR or compact HD videocameras. It's based on 8 in (20.3 cm) standard 15mm rods and features a camera plate with quick release and a rear-mounted pistol grip.

The camera plate mounts the camera, including a quick-release element, and...
Availability: In Stock
$19900
QTY
Varizoom
MFR Part #: VZSTINGRAY
Samy's Part #: S-009176
The VariZoom StingRay Pro HD DSLR Support System is a highly flexible, modular support for DSLR cameras with movie recording function and traditional video cameras, and provides a complete tool-free operation experience. Incorporating the RigLits architecture, the StingRay includes all RigLits...
Availability: In Stock
$59900
QTY
Varizoom
MFR Part #: VZCROSSFIRE
Samy's Part #: S-009203
The Varizoom VZ-Crossfire is a handheld Camera Stabilizer and Tripod Support system. With up to 6 different shooting modes available, no other product on the market offers as many options as the CrossFire. The CrossFire is the most versatile shooting tool for DSLRs and HD Video. Unlike any other...
Availability: In Stock
$19900
QTY
Varizoom
MFR Part #: VZAR5K
Samy's Part #: S-011977
The Adjustable Joint Arm can be used for a number of grip applications, but it is ideally suited for mounting a VariZoom monitor like the VZTFT or VZTFT7 to a tripod leg (or other support) for highly flexible positioning.

The universal clamp (the detachable 'foot' of the AR5K) can also be used...
Availability: In Stock
$3900
QTY
Kessler Crane
MFR Part #: 100159
Samy's Part #: S-012270

Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and track? The Pocket Dolly? is the solution for those shots! At just 38.5 in length and 7.5 pounds, the Pocket Dolly? is very portable, so you can always get the shot you need, where ever you
...
Availability: In Stock
$39900
QTY
Varizoom
MFR Part #: VZ1SHOOTER
Samy's Part #: VARIVZ1SHTR

The VZ-1Shooter is the most affordable and effective camera support eliminating fatigue of your arm caused while holding the camera and support system. It provides adjustable fittings for an endless variety of shooting configurations. The special aluminum alloy allows you to bend the support into...
Availability: In Stock
$1500
QTY
Varizoom
MFR Part #: VZPGB
Samy's Part #: VARIVZPGB
This innovative right-angle bracket attaches to the mounting clamp on your VariZoom controller, and converts it into a convenient pistol-grip handle for smaller DV, Digital-8 & Hi-8 camcorders. Hand-held shooting becomes much easier and more comfortable, while providing precise zoom and focus...
Availability: In Stock
$1500
QTY
Varizoom
MFR Part #: VZS2000
Samy's Part #: VARIVZS2000
The Varizoom S-2000 On Camera Light combines 4 advanced LEDs with professional optic technology design. The S-2000 offers the equivalent of a 40 watt output at 5600k color temperature with a low power consumption of only 12 watts with low heat radiation. The S-2000 can last in excess of 100,000...
Availability: In Stock
$4900
QTY
Varizoom
MFR Part #: VZS2010C
Samy's Part #: VARIVZS2010C

The VariZoom Dimmable On-Camera LED Light S2010C features four high-power LEDs offering a 40W equivalent output at 5600K color temperature. The light output is dimmable, and there's an on/off switch that lets you save your output setting. A Canon DV battery plate is included that supports 6-9V...
Availability: In Stock
$4900
QTY
Varizoom
MFR Part #: VZS2010P
Samy's Part #: VARIVZS2010P

The VariZoom S-2010P features four high-power LEDs offering a 40W equivalent output at 5600K color temperature. The light output is dimmable, and there's an on/off switch that lets you save your output setting. A Panasonic DV battery plate is included that supports 6-9V Panasonic D Series batteries....
Availability: In Stock
$4900
QTY
Varizoom
MFR Part #: VZS2010S
Samy's Part #: VARIVZS2010S

The VariZoom S-2010S features four high-power LEDs offering a 40W equivalent output at 5600K color temperature. The light output is dimmable, and there's an on/off switch that lets you save your output setting. A Sony DV battery plate is included that supports 6-9V Sony L Series batteries. The...
Availability: In Stock
$4900
QTY
Cinevate
MFR Part #: CIFFAS000022
Samy's Part #: S-014963

The Cinevate Articulating Grip Gear Ring & Focus Lever Kit consists on an Articulating Camera Grip, a Focus Lever, Lens Gear Ring, 5 Sets of Nylon Spokes, and 5 spokes (3/8", 1/2", 5/8", 3/4", and 1"). With 360° Swivel, the small camera articulating grip ensures efficient and stable shooting....
Availability: In Stock
$13900
QTY
Notice: This item is non-returnable
Cinevate
MFR Part #: CILTAT1022
Samy's Part #: S-017791

The Cinevate 35" Atlas 10 FLT Slider with Standard Legs is a ball-bearing 35" camera slider featuring a 40 lb weight capacity and designed to very smoothly slide that 40 lbs sideways, forward and backward, and, with the addition of an optional tripod, the Atlas will get you slanted shots and p...
Availability: In Stock
$29900
QTY
Alan Gordon Enterprises
MFR Part #: 1056-GAFFBLUERI
Samy's Part #: S-018093

The Alan Gordon Red Ring Gaffer's Glass is an essential "Tool of the Trade" for professional set lighting. It is designed to allow you to locate the center of your key light or "hot spot" to accurately determine where to position lighting to achieve optimum coverage. By holding the Gaffer's Glass™ up...
Availability: Special Order
Alan Gordon Enterprises
MFR Part #: 1056-POLAVIEW
Samy's Part #: S-018099

The Alan Gordon Polaview - Polarizer Checker duplicates the polarizing effects of your camera's polarizing filters. Avoid cleaning finger prints & smudges from the camera's polarizing filters by previewing the shot through the POLAVIEW?.

As a simple, accurate & essential tool, the POLAVIEW? can
...
Availability: In Stock
$2195
QTY
Replay XD
MFR Part #: 60RPXDLAN
Samy's Part #: S-020283

The Replay XD Tough Nylon Lanyard is made from tough nylon and features an o-ring fastening system. Includes adhesive mount for extra security.

Please Note: Old inventory. New, but packaging may show signs of age.
Availability: In Stock
$300
QTY
Replay XD
MFR Part #: 70-RPXD-PRO-FM-CNCV
Samy's Part #: S-020286

The Replay XD Flat VHB Mount for Convex Surfaces is rugged and lightweight billet aluminum curved adhesive mount for convex surfaces, and provides a mounting base to be used in conjunction with the 3M VHB adhesive pads. It also features 2-Way, 360deg. positioning for unlimited camera angles and...
Availability: In Stock
$500
QTY
Replay XD
MFR Part #: 70-RPXD-PRO-FM-FLAT
Samy's Part #: S-020287

The Replay XD VHB Adhesive Mount for Flat Surfaces is part of a line of mounting options for the XD series action cameras, and provides a mounting base to be used in conjunction with the 3M VHB adhesive pads. When combined with an adhesive pad, as well as the appropriate Camera Clamp for your...
Availability: In Stock
$700
QTY
Matthews
MFR Part #: 377702
Samy's Part #: S-020571

The Bazooka 24-39" Telescoping Bazooka while being used either 'freestanding' or in conjunction with any other camera dolly, reveals a myriad of creative imaging possibilities when using the Elemac mounting plate and a variety of side arms and adapters as shown here. The Matthews Bazooka offers...
Availability: Special Order
$1,26400
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 515003
Samy's Part #: S-020574

The Mathews Elemac Mounting Plate is a standard plate that works with Elemac dolly systems, camera heads and bazooka camera stands. The plate has three bolt Elemac connectivity for standard workability.
Availability: In Stock
$20800
QTY
Notice: This item is non-returnable
Dinkum Systems
MFR Part #: 3112
Samy's Part #: S-021097

An alternative base for use with any of the Dinkum Systems standard 3/4" sized arm products (not compatible with the COMPACT lens shade for DSLRs and small video cameras).  Simply screw the 1/4-20" Screw Mount to the handle or accessory block of most film or video cameras or to a mini-Cardellini...
Availability: Special Order
Dinkum Systems
MFR Part #: 3129
Samy's Part #: S-021098

An alternative base for use with any of the Dinkum Systems standard 3/4" sized arm products (not compatible with the COMPACT lens shade for DSLRs and small video cameras).  Simply screw the 1/4-20" Fixed Base Mount to a carrying handle or accessory block of most film or video cameras and affix your lens...
Availability: In Stock
$1345
QTY
Dinkum Systems
MFR Part #: 3174
Samy's Part #: S-021099

An alternative base for use with any of the Dinkum Systems standard 3/4" sized arm products (not compatible with the COMPACT lens shade for DSLRs and small video cameras).  Simply screw the 3/8-16" Fixed Base Mount to a carrying handle or accessory block of most film or video cameras and affix your lens...
Availability: In Stock
$699
QTY
Dinkum Systems
MFR Part #: 3136
Samy's Part #: S-021100

The Dinkum Systems Cantilever Clamp Base for Dinkum Arms attaches to Dinkum ActionPod mounts, FlexiMount Mic Mounts, or lens shades and turns them into handy clamping devices with 200 lb of clamping pressure. You can use it to hold reflectors, foam core, tabletop items, laser pointers, and...
Availability: In Stock
$2499
QTY
Dinkum Systems
MFR Part #: 3167
Samy's Part #: S-021101

Turn your Dinkum Systems camera mount or lens shade into a super strong, ultra useful clamp-to-clamp device (not compatible with the COMPACT lens shade for DSLRs and small video cameras).  The 1" spring clamp has a double-adaptor piece which allows the unit to be attached to the top end of our...
Availability: In Stock
$1345
QTY
Dinkum Systems
MFR Part #: 3228
Samy's Part #: S-021102

Turn your Dinkum Systems camera mount or lens shade into a super strong, ultra useful clamp-to-clamp device (not compatible with the COMPACT lens shade for DSLRs and small video cameras).  The 2" spring clamp has a double-adaptor piece which allows the unit to be attached to the top end of our...
Availability: In Stock
$1795
QTY
Dinkum Systems
MFR Part #: 3099
Samy's Part #: S-021103

Lengthen the arm of your Dinkum Systems mounts and lens shades to your exact specification with 3/4 in. Additional Links (5 Segments). These additional arm segments are NOT compatible with the COMPACT lens shade for DSLRs and small video cameras.
Availability: In Stock
$895
QTY
Dinkum Systems
MFR Part #: 3075
Samy's Part #: S-021106

Already own one of the Dinkum Systems ActionPod mounts or any other device with a 1/4-20" thread? Make your gear do double duty with the 1/4-20 to 3/8-16 in. Adapter Screw. Allows fast and simple conversion from a camera mounting device to a microphone shock mount.  Standard 1/4-20" thread converts...
Availability: In Stock
$535
QTY
Dinkum Systems
MFR Part #: 3242
Samy's Part #: S-021108

Already own an ActionPod or FlexiMount? Make your device do double duty by popping off the top to turn it into one of our Dinkum French Flag for Pro. Or if you've somehow managed to damage your FlareDinkum Pro you can make your old French flag look like new again with a replacement shade. Classic...
Availability: In Stock
$2425
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]