CONTACT US AT 800-321-4726
MFR Part #: CRANE2
Samy's Part #: S-054555
Includes FREE Zhiyun-Tech Focus Motor!
Availability: In Stock
MFR Part #: YSCC80
Samy's Part #: S-034630
The Phototools 32" Camera Slider is approximately two and a half feet long and features three steel bearing rollers. The slider track incorporates three sets of 1/4"-20 and 3/8"-16 mounting holes, allowing you to support it in the center or at both ends. Two removable height adjustable legs...
Availability: In Stock
MFR Part #: C12D9
Samy's Part #: S-039199
The Benro MoveOver12 35.4" Dual Carbon Rail Slider with Flywheel is ideal for strength and lightweight support, the MoveOver12 includes two 100% 22mm carbon fiber rails. Flywheel with belt drive gives precise control with rubber track belt drive. The carriage operates using 4 quiet operation b...
MFR Part #: ES-T37-A
Samy's Part #: S-054768
Arm your camera with the Tilta ES-T37A GH5 Handheld Camera Cage Rig with Wooden Handgrip specifically designed for the Panasonic GH Series Cameras: GH4 and GH5. This cage has been redesigned to fit PL mounts and Metabones Adapters - allowing for limitless lens choices. Furthermore, the "A" Kit...
Availability: In Stock
MFR Part #: A73CAGE
Samy's Part #: S-057902
The Shape Ergonomic Cage for Sony a7R III/a7 III Camera is targeted at filmmakers, videographers and photographers who want a simple, hassle-free and ergonomic cage design that really works.
Specifically designed for the Sony A7R III camera, the form-fitting cage offers additional protection and...
Availability: On Backorder
MFR Part #: DLSLD23
Samy's Part #: S-018105
The Dot Line DLC 23" Camera Slider can be attached onto a tripod or used standalone on its included feet. It is 23 inches long, and its feet raise its height approximately 2 inches. It can take on up to ten pounds.
It is equipped with a spirit level that indicates how even or uneven a setup is,...
Availability: On Backorder
MFR Part #: VASC-SLLITE800
Samy's Part #: S-021119
The Varavon Slide Cam Lite 800 (32 in.) Slide Cam Lite Track, Cine Dollies & Accessories Slide Cam Lite 800 30mm is wonderful railing for stylish shooting in various positions.
The Slide Cam Lite 800 weighs approximately 3.3 lbs and can support a maximum capacity of up to 19.8 lbs. For optimal...
MFR Part #: ATLAS30RLWB47
Samy's Part #: S-015314
The Cinevate Inc Atlas 30 47" Slider with Regular Legs is a linear tracking system that can bear a load up to 30 lb (13.61 kg). It is made from a single block of aluminum and is supported by 5/8.
Features:
- Linear Tracking System
- Can Bear Load up to 30 lb (13.61 kg)
- Made from a Single Block
Availability: In Stock
MFR Part #: A73SM
Samy's Part #: S-057904
The Shape Shoulder Mount Kit for Sony a7R III/a7 III Camera is targeted at filmmakers, videographers and photographers who want a simple, hassle-free and ergonomic cage design that really works.
Specifically designed for the Sony A7R III camera, the form-fitting cage offers additional protection...
Availability: On Backorder
MFR Part #: 249566
Samy's Part #: S-048061
Includes Free
- Auger Spike 8 In. Drill Type Lawn Spike with 3/8 In. Screw - FREE with Qualifying Purchase
- 6 In. Suction Cup With 3/8 In. 16 Stud - FREE with Qualifying Purchase
Total Value: $149.95
Availability: In Stock
MFR Part #: DLV2
Samy's Part #: S-030314
The new Dot Line Corp. Double Handle Rig With Shoulder Pad is a very solid and sturdy, yet compact and lightweight HDSLR Video Rig designed to help give you smooth videos with your HDSLR. The all metal unit is fully adjustable. The camera position can be adjusted up or down and left or right to fit...
Availability: In Stock
MFR Part #: VS24
Samy's Part #: S-045295
The ProMediaGear PMG-DUO 24 In. Video Slider with Carrying Case is the World’s first dual track slider. The body of slider is cut out from solid piece of aluminum with two tracks, with straight track on one side and curved on the other. The carriage is designed to be moved quickly from one side...
Availability: In Stock
MFR Part #: AM-ZEUS A7R2 PR
Samy's Part #: S-042994
The Varavon Zeus Premium Cage for Sony a7R II, a7S II, & a7 II provides the added protection, stability, and accessory mounting options needed to prepare your Sony a7R II, a7S II, or a7 II camera for video production work. It features a walnut grip for handheld shooting as well as two adjustable...
MFR Part #: 429482
Samy's Part #: S-042849
The Matthews Brauer Hostess Tray Kit allows for profile hostess tray shots with independent window movement. It's the only Hostess Tray on the market that will adjust for the window up and down during the take. Additionally, the door can be opened or closed without restrictions. Imagine the time...
Availability: In Stock
MFR Part #: HCM-CAGE
Samy's Part #: S-019191
Need a DSLR cage or 15mm rod supports but don't want to spend $400? The Dot Line Habbycam Universal Rod System and Cage is the answer. A full featured accessories cage with industry standard 15mm rods for mounting your follow focus, matte box, audio gear and other accessories. The included cheese...
MFR Part #: 311
Samy's Part #: S-044603
Bundle and save! The D|Focus Systems D|Cage Bundle for Panasonic GH4 Camera is the perfect way to get a fully functional follow focus system for your GH4 or GH3 without breaking the bank. All of our products are made in the USA of sturdy, CNC machined aluminum and injection molded ABS plastic....
Availability: In Stock
MFR Part #: AMA7SII
Samy's Part #: S-037956
The Varavon Armor II Camera Cage for Sony a7S Standard Camera prepares your Sony a7S camera for video production work. For handheld shooting, a top handle in included, as well as a leather hand strap that attaches to the right side cage. With the camera in the cage, you still have access to...
MFR Part #: DLV11
Samy's Part #: S-026693
The new Dot Line Corp. V-11 HDSLR Rig with Follow Focus & Matte Box has Rig, Follow Focus unit and Matte Box all in an attractive, full color box. The Rig features industry standard 15mm rods that are black anodized. The use of 15mm rods and connectors allows for easy adjustments of the rig giving flexibility...
Availability: In Stock
MFR Part #: VS32
Samy's Part #: S-046714
The ProMediaGear PMG-DUO 32 In. Video Slider with Carrying Case is the World's first Slider with both curved and straight track. This 32 model is what we call an Interview Slider. With less pronounced curve of radius of 6 feet is perfect for shooting video of human objects. All PMG-Duo slider...
Availability: In Stock
MFR Part #: CREEPERBUTT
Samy's Part #: S-058148
The Creeper Butt-Dolly was invented by I.A.T.S.E local 80 key grip, Carlos Boiles for low-angle handheld camera work. It is height adjustable, using a simple system of various length riser rods which are variably adjustable in seconds. It's effortless, ultra-smooth, silent operation is the result...
Availability: In Stock
MFR Part #: JASRCON
Samy's Part #: S-022538
This Conversion Kit includes exactly what you need to convert your current rig into a Street Runner v2.
The Street Runner Conversion Kit is the perfect solution for anyone desiring a lightweight, on the go support rig. It gives you the ability to Convert any of your existing Jag35 DSLR Kits into...
Availability: In Stock
MFR Part #: C300SM
Samy's Part #: S-057173
The Shape Canon C100 C300 C500 Shoulder Mount is a shoulder rig with light weight support (LWS) for the Canon Cinema EOS line of movie cameras. As the three have a similar profile, this rig is compatible with the C100, C300and C500 models. The base plate features specially recessed rods to acc...
Availability: On Backorder
MFR Part #: CPQT00000047.01
Samy's Part #: S-054292
The Ronin 2 Pro Combo with Ready-Rig GS and Proarm Kit includes a stabilizer, transportation case, remote controller, camera power cables, and a redundant battery system. The Ronin 2 allows filmmakers to capture and transition between scenes effortlessly and is, without a doubt, the most versatile...
Availability: On Backorder
MFR Part #: ES-T27-A
Samy's Part #: S-050986
The Lightweight Rig Cage With Wooden Handle For Sony Alpha a6300 a6500 is specifically designed for SONY α6300 and α 6500 series full frame mirrorless digital cameras. The cage is CNC-milled from high quality aluminum, which significantly protects the camera from being damaged. The rig is suitable...
Availability: In Stock
MFR Part #: RS3124
Samy's Part #: S-016104
The RPS Studio FloPod Video Stabilizer is an innovative stabilizing support for video DSLR cameras. Conceptually the FloPod borrows from stabilizers with 3-axis gimbals, but the form factor is all its own, and optimized for hybrid DSLR cameras that do both stills and HD video. Mounted to a C-bracket, the
...MFR Part #: PCPD1
Samy's Part #: S-014438
The very affordable Dot line Pico Dolly gives a stable platform for smaller video productions. Made of aluminum and rollerblade type wheels with high quality ball bearings, the 3-1/2 inch wide dolly features three 1/4-20 female thread positions for mounting optional ball heads or articulating...
Availability: In Stock
MFR Part #: VASCSLLITE600
Samy's Part #: S-030980
The Varavon Slide Cam Lite 600 is a precisely machined 2 feet long camera slider with a ball-bearing slide mechanism. Two removable and height adjustable legs can raise the slider up to 2 inches off of the ground. The slider can be adjusted in variety of positions to get desired shooting position...
MFR Part #: C12D9K1
Samy's Part #: S-039200
The Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit with Video Head & Tripods is ideal for strength and lightweight support, the MoveOver12 includes two 100% 22mm carbon fiber rails. Flywheel with belt drive gives precise control with rubber track belt drive. The carriage operates using 4 quiet...
MFR Part #: DL-0375
Samy's Part #: S-016547
The new Dot Line Video Stabilizer with Grip and Quick Release is complete and economical featuring a fully adjustable camera mount allowing viewing through the viewfinder or via the LCD screen with padded shoulder and chest supports as well a padded hand grip under the camera platform that is...
MFR Part #: Z-DER
Samy's Part #: S-030364
The Zacuto Enforcer Foldable Camera Rig includes our Gorilla Plate V2 as the platform for your camera. You can attach your Zacuto Z-Finder Mounting Frame to this Gorilla Plate V2. Attach your camera to the plate with the single 1/4 20 screw and quick release on and off the Enforcer with the red...
Availability: In Stock
MFR Part #: AM-ZEUS A7R2 ST
Samy's Part #: S-042993
The Varavon Zeus Standard Cage for Sony a7R II, a7S II, & a7 II provides the added protection, stability, and accessory mounting options needed to prepare your Sony a7R II, a7S II, or a7 II camera for video production work. With the camera in the cage, you still have access to the SD card slot,...
MFR Part #: VS368
Samy's Part #: S-046716
The ProMediaGear Interview Video Slider with 36 In. Straight Track Curve Track 8 ft. introduces the world's first dual action slider, featuring a straight and curved track in one slider body. The two tracks are CNC machined from solid block of lightweight AL 6061-T6 aircraft quality aluminum,...
Availability: In Stock
MFR Part #: VASCSLLITE486
Samy's Part #: S-031531
The Varavon Slidecam LITE 486 Camera Slider is the lightest roller bearing slider, it weighs only 1.2 kg. It is compact & made of strong Aluminum Alloy, chrome coated with special steel roller bearing. It is compact and easy to portable. It also has follow focus sling and is equally suitable for various...
MFR Part #: C12D6
Samy's Part #: S-039198
The Benro MoveOver12 23.6" Dual Carbon Rail Slider with Flywheel is ideal for strength and lightweight support, the MoveOver12 includes two 100% 22mm carbon fiber rails. Flywheel with belt drive gives precise control with rubber track belt drive. The carriage operates using 4 quiet operation b...
MFR Part #: 1004-DVTEC-5003
Samy's Part #: ALAN1004DVTEC50
The DVtec DSLR Multi-Rig Pro for HD-SLR & Digital Video Cameras from Alan Gordon Enterprises Has all the same features of the DVRigPro plus gives you the additional mounting point for just about any camera. This new Heavy Duty system is designed for both Front heavy 35mm adaptor systems and for standard...
MFR Part #: CICS
Samy's Part #: S-015922
CineSkates for use with a GorillaPod Focus tripod, a ballhead, and any camera with a standard tripod mount that weighs less than 5 pounds. This package only includes CineSkates and a case. A GorillaPod Focus and a ballhead are REQUIRED and NOT included with this item. CineSkates are a set...
Availability: On Backorder
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE