MFR Part #: EL11123
Samy's Part #: S-031155
The Elinchrom Sync Cable 3.5mm to Amphenol - 15.75" (40 cm) is used to connect the 3.5mm mono jack of radio receivers, such as the EL-Skyport Universal Receiver to all flash units with an Amphenol sync plug. It also fits older Elinchrom packs and monolights that have the lock-ring style of sync...
Availability: In Stock
$1000
MFR Part #: 802504
Samy's Part #: S-027452
The PocketWizard N-MCDC2-ACC-1 Pre-Trigger Remote 1ft. Cable is for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal. Cable length is 3ft. (91.5 cm) maximum and 1ft. (30 cm) when coiled. It connects 1/8 In. (3.5 mm) stereo miniphone...
Availability: In Stock
MFR Part #: 804419
Samy's Part #: S-027457
The PocketWizard HSFM3 Flash Sync 3ft. Cable is for remotely triggering a flash via a standard hot shoe to any flash equipped with a PC terminal or for connecting a camera or lens PC terminal to a transmitting PocketWizard radio. The cable length remains 3 foot in normal coiled condition and has...
Availability: In Stock
$3695
MFR Part #: CD1
Samy's Part #: QUANCD1
The Quantum CD-1 cable for Nikon digital cameras, to work with the turbo 2x2 Battery pack and Nikon D1, D1X & D1H Digital Cameras.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
MFR Part #: 5743B002
Samy's Part #: S-017072
For sophisticated wireless flash setups, there's nothing like the Speedlite Transmitter ST-E3-RT. Facilitating radio controlled, two-way wireless transmission up to 98.4 feet, among up to five groups or fifteen individual Speedlites, the ST-E3-RT represents the next generation in wireless flash...
Availability: In Stock
MFR Part #: 2478A002
Samy's Part #: CANO2478A002
Dedicated clip-on transmitter for E-TTL/E-TTL II wireless flash system. Allows for wireless control of one or more Speedlite 600EX-RT, 580EX II, 580EX, 550EX, 430EX III-RT, 430EX and/or 420EX off-camera.
Availability: In Stock
MFR Part #: 804611
Samy's Part #: S-035910
The PocketWizard MPCF-L PC Sync to Miniphone Adapter adapts any PC sync cable to a PocketWizard radio.
The adapter is useful PC terminal to 1/8" (3.5 mm) mono miniphone male. It is compatible with PC sync cables like those provided by flash manufacturers, including long tip, locking, and standard...
Availability: Special Order
MFR Part #: PW311741
Samy's Part #: S-029815
There is no other product that can give you the creative freedom of a PocketWizard wireless triggering system. Whether you are a seasoned pro looking for a creative new approach to your photography using our patented HyperSync technology or a new photographer simply looking to free your flash...
Availability: In Stock
$1475
MFR Part #: X1RS
Samy's Part #: S-057557
Expand your wireless flash system with the Godox X1R-S TTL Wireless Flash Trigger Receiver. This 2.4 GHz system is compatible with Sony cameras and flashes that support ADI / P-TTL for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. It also...
Availability: In Stock
$4000
MFR Part #: 804-418
Samy's Part #: S-036350
The PocketWizard MM3 Flash Sync Cable (3 ft.) is used for remotely triggering a flash equipped with a 1/8" (3.5 mm) miniphone sync terminal. The cable is 3 feet long to work with distance flash triggering. The cable is compatible with AlienBees, Broncolor, Multiblitz, Profoto D2, B2, D1 Series,...
Availability: In Stock
$1095
MFR Part #: NPC300N
Samy's Part #: S-046031
The Nissin Power Cord for Nikon Flash Units is for use on Power Pack Pro300 Batteries with Canon Speedlites. The cord is durable and made to provide un-interrupted power from the power pack to the flash unit.
Features:
- Provides consistent power flow to the power pack unit
- Durable and made
Availability: In Stock
$4495
MFR Part #: MH3
Samy's Part #: LPAD804404
The PocketWizard MH3 Miniphone to Household Cable (3 ft. Straight) is used for remotely triggering a flash equipped with a household sync terminal, from 1/8" (3.5 mm) mono miniphone To household male sync terminal. It is compatible with flash models using a household sync terminal including Comet,...
Availability: In Stock
$1499
MFR Part #: 802502
Samy's Part #: S-027450
The PocketWizard CM-N3-ACC-1 Pre-Trigger Remote 1ft. Cable is for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon 10-pin remote shutter release terminal Cable length is 3ft. (91.5 cm) maximum and 1ft. (30 cm) when coiled. It connects 1/8 In. (3.5 mm) stereo miniphone...
Availability: In Stock
$2022
MFR Part #: VXNA
Samy's Part #: S-026496
The Lumedyne HV Cyclers On-Camera Power Solutions fits Nikon brand flashes that have an HV connector ranging from the SB28DX, SB80DX, SB800, SB900 and the SB910. It also fits many other popular brands with similar HV connectors like Nissin, Flashpoint, Triopo and others, although some brands...
Availability: In Stock
MFR Part #: MB5
Samy's Part #: QUANMB5
The Quantum MB5 connection cable will allow a QB1+ or QB1c battery pack to power the following flashes: Canon 580EX Phoenix APZ 99C Promaster 5550DX, 5750DX, FTD5600M, 5700M, 5950, 6500M, 7000M, Vivitar 730AFC
- Cord locks into output jack of Quantum Battery
- Long coiled cord stretches
Availability: In Stock
MFR Part #: FA-EC1AM
Samy's Part #: S-031273
Extend the length of your off-camera flash cable with the Sony FA-EC1AM Extension Cable. The FA-EC1AM Extension Cable for Flash can be used if the Off-Camera Cable for Flash (FA-CC1AM) or Multi Flash Cable (FA-MC1AM) is not long enough, or when connecting to a Triple Connector for Flash (FA-TC1AM).
...
Availability: Special Order
MFR Part #: PMPWPC1
Samy's Part #: PARAPMPWPC1
The Paramount PW-PC1 Sync Cord is a 12" long straight sync cord that features a Miniphone plug at one end, and a male PC connection at the other end. Ideal for use with a Pocket Wizard Radio Slave.
Availability: In Stock
$2795
MFR Part #: CMN3ACC
Samy's Part #: LPAD802453
The PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable is a special remote shutter release cable called a Pre-Trigger cable. A pre-trigger cable controls both the half-press and full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s...
Availability: More In Transit
$3995
MFR Part #: DL1531P
Samy's Part #: DOTLDL1531P
$799
MFR Part #: QF16
Samy's Part #: QUANQF16
Quantum Qflash T2/X2 can use the QF16 TTL Adapter for Leica R5, R6, R6-2, R7, RE Cameras. This TTL Adapter connects to a FreeWire TX and provides wireless TTL exposure control for remote Qflash's for Leica R5, R6, R6-2, R7, RE Cameras.
Please Note: Old inventory, New but packaging may show signs...
Please Note: Old inventory, New but packaging may show signs...
Availability: In Stock
$500
MFR Part #: 802503
Samy's Part #: S-027451
The PocketWizard N-MCDC2-ACC-1 Pre-Trigger Remote 1ft. Cable is for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon MC-DC2 remote terminal. Cable length is 3ft. (91.5 cm) maximum and 1ft. (30 cm) when coiled. It connects 1/8 In. (3.5 mm) stereo miniphone to Nikon MC-DC2...
Availability: In Stock
$1716
MFR Part #: 804310
Samy's Part #: S-027453
The PocketWizard PC1N Locking PC Sync 12 In. Cable is for connecting a PocketWizard radio (including FlexTT5) to any flash equipped with a PC terminal or for connecting a camera or lens PC terminal to a transmitting PocketWizard radio (except MiniTT1 and FlexTT5). The cable length remains 1 foot...
Availability: In Stock
$1395
MFR Part #: 804521
Samy's Part #: S-001326
The Pocket Wizard N-MCDC2 Motor Cord is used with the Pocket Wizard radio slaves to provide remote shutter activation to Nikon cameras with the DC2 connection, such as the D90 & D5000.
Necessary when using the Pocket Wizard slaves to remotely fire Nikon cameras with the DC2 connection (as of this...
Availability: In Stock
$2900
MFR Part #: 804525
Samy's Part #: S-027454
The PocketWizard PTMM Pre-Trigger Adapter is for adapting a -ACC stereo miniphone remote camera cable to a mono miniphone pre-trigger cable. Cable length is 3ft. (91.5 cm) maximum and 1ft. (30 cm) when coiled. Pre-trigger switch allows you to selectively wake or sleep camera just like using camera's...
Availability: Special Order
MFR Part #: 5744B001
Samy's Part #: S-017073
$4495
MFR Part #: RS3154
Samy's Part #: DOTLRS3154
This cord allows any flash such as speedlites or AC Slave flash units that take a 2.5mm minijack to connect to an SLR or DSLR that has a PC connection. Length is 3 foot.
Availability: In Stock
$1895
MFR Part #: DL1530P
Samy's Part #: DOTLDL1530P
$799
MFR Part #: QF23
Samy's Part #: QUANQF23
Quantum Qflash T2/X2 can use the QF23 TTL Adapter for Leica R8 Camera.
This TTL Adapter connects to a FreeWire TX and provides wireless TTL exposure control for remote Qflash's for Leica R8
Availability: In Stock
MFR Part #: CL3
Samy's Part #: QUANCL3
The Quantum CL3 connection cable will allow a Turbo series battery pack to power a Minolta 360PX flash.
Please Note: Old inventory, New but packaging may show signs of age.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
MFR Part #: CM1
Samy's Part #: QUANCM1
The Quantum CM1 connection cable will allow a Turbo series battery pack to power Metz 45CT-1 or 45CT-5 flashes.
Please Note: This is old stock and the boxes has minor signs of age.
Please Note: This is old stock and the boxes has minor signs of age.
Availability: In Stock
MFR Part #: MCX
Samy's Part #: QUANMCX
MCX power cable from a Quantum Battery 1C or Battery 1+ to a Contax 645 camera.
Please Note: Old inventory, New but packaging may show signs of age.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$3595
MFR Part #: QB23
Samy's Part #: QUANQB23
Quantam QB23 10 ft. (3m) Extension Cord for use with Quantam Battery 2. The QB-23 extends the working distance between the Quantum Battery 2 and any of the power modules available for it (such as module S, M, P, or others).
Insert the plug end of the QB-23 into one of the Quantum Battery 2 flash...
Insert the plug end of the QB-23 into one of the Quantum Battery 2 flash...
Availability: In Stock
MFR Part #: CK
Samy's Part #: QUANCK
This connection cable will allow the Turbo series battery packs to power the following Nikon flashes: SB-28 (US version only), SB-27, SB-26, SB-25, SB-24 & SB-11.
Please Note: Old inventory, New but packaging has signs of age and minor damage.
Availability: In Stock
MFR Part #: ME4
Samy's Part #: QUANME4
The Quantum ME4 connection cable will trigger the QB1+ or QB1c battery pack to power a Metz 40MZ-series flash.
Compatible with: Metz 40MZ1i, Metz 40MZ2, Metz 40MZ3
Please Note: Old inventory, New but packaging may show signs of age.
Compatible with: Metz 40MZ1i, Metz 40MZ2, Metz 40MZ3
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
MFR Part #: ME
Samy's Part #: QUANME
The Quantum ME connection cable will allow a QB1+ or QB1c battery pack to power a Metz 32CT, 36CT series, Minolta 1200AF, 2800AF, Nikon SB-20, SB-22, Olympus T32, Popular 3800 & Soligor 30D flash.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
MFR Part #: MZ2
Samy's Part #: QUANMZ2
This connection cable will allow a Battery 1+ (QB1+) or Battery 1 Compact (QB1c) battery pack to power the following flashes: Albinar 120MDT-TZ, Canon 420EZ and 430EZ flash.
Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE