CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Nikon
MFR Part #: 538
Samy's Part #: NIKO538

Designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens.

Adds extra protection from accidental impact.

Rubber type folds back over the lens when not in use.

For 50mm f/1.2 AI-S, 50mm f/1.4, 1.8 D-AF & 58mm f/1.2 Noct...
Availability: In Stock
Ships next business day
$1699
QTY
Canon
MFR Part #: 3531B001
Samy's Part #: S-010731

The ET-87 Lens Hood is designed for use with the 70-200mm f/2.8L IS II USM Telephoto Zoom Lens. Lens hoods shade the front element of the lens from extraneous light and help to prevent flare.
Availability: In Stock
Ships next business day
$5995
QTY
Canon
MFR Part #: 9533B001
Samy's Part #: S-035550

The Canon ET-83D Lens Hood is designed to prevent stray light from entering the lens in order to keep unwanted glare from affecting your photographs. A circular polarizing filter operation window is located on the hood, allowing operation of a circular polarizing filter. Direct replacement...
Availability: In Stock
$9500
QTY
Canon
MFR Part #: 2310C001
Samy's Part #: S-057522

The 
Canon ET-78B Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the hood is extended, you also get the added benefit of some extra protection from accidental impact. This dedicated...
Availability: In Stock
Ships next business day
$5500
QTY
Canon
MFR Part #: 2960C001
Samy's Part #: S-060344

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from
...
Availability: In Stock
Ships next business day
$5995
QTY
Phototools
MFR Part #: LHT58
Samy's Part #: S-059971

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
Ships next business day
$899
QTY
Dot Line
MFR Part #: DL0464P
Samy's Part #: DOTLDL0464P

Black rubber lens hood is collapsible. Folds back over lens for storage. Inside front thread allows for filters or accessories to be attached.
Availability: In Stock
$649
QTY
Notice: This item is non-returnable
Canon
MFR Part #: 2301C001
Samy's Part #: S-054585

The 
Canon LH-DC110 Lens Hood is designed for the Canon PowerShot G1 X Mark III Digital Camera, it minimizes flare by deflecting stray light from entering lens. It provides protection to the lens from accidental impacts, bumps, and scratching.
Availability: In Stock
Ships next business day
$5995
QTY
Canon
MFR Part #: 6320B001
Samy's Part #: S-019770

The Canon EW-43 Lens Hood for EF-M 22mm f/2 STM Lens is a shade for the EF-M 22mm f/2 STM Lens, which is compatible with Canon's EOS-M mirrorless digital camera. It prevents stray light from entering the lens, thus reducing glare and lens flare for better visibility and image quality.
...
Availability: In Stock
$2900
QTY
Notice: This item is non-returnable
Phototools
MFR Part #: LHT67
Samy's Part #: S-059973

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
Ships next business day
$899
QTY
Nikon
MFR Part #: 4206
Samy's Part #: S-064578

Dedicated to the 
Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR lens, the Nikon HN-40 Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit...
Availability: More In Transit
$2695
QTY
Canon
MFR Part #: 2655A001
Samy's Part #: CANO2655A002

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: In Stock
Ships next business day
$2299
QTY
Nikon
MFR Part #: 4987
Samy's Part #: S-023338

The Nikon HB-66 Bayonet Lens Hood comes with the AF-S NIKKOR 18-35mm f/3.5-4.5G lens, and is designed to keep flare from entering the lens, when shooting. It is also available as a replacement item.
Availability: In Stock
$3500
QTY
Promaster
MFR Part #: 2580
Samy's Part #: S-046210

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 62mm Wide Angle Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting...
Availability: In Stock
$995
QTY
Promaster
MFR Part #: 4183
Samy's Part #: S-046192

The Promaster 67mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
QTY
Leica
MFR Part #: 044011004000
Samy's Part #: S-015792

The Leica Hood for 50mm f/1.4 for M Lens is replacement viewing hood for the lens.
Availability: In Stock
$26200
QTY
Notice: This item is non-returnable
Nikon
MFR Part #: 4125
Samy's Part #: NIKO4125

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

The "petal" shape of this lens...
Availability: In Stock
Ships next business day
$1295
QTY
Nikon
MFR Part #: 4160
Samy's Part #: S-047377

The Nikon HB-77 Bayonet Lens Hood is designed to fit the Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR and the AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED telephoto zoom lenses. By reducing the amount of non-essential light falling onto the front lens element, lenses can better achieve their optimum...
Availability: In Stock
Ships next business day
$2995
QTY
Dot Line
MFR Part #: DL-2152
Samy's Part #: S-043113

The "petal" shape of the Dot Line 52mm Snap-On Lens Hood maximizes the amount of hood coverage with the minimum amount of weight and hood area. In addition, the design of this hood allows it to be reversed and stored on the lens, when not in use. It is also designed to accept lens caps.

Lens hoods...
Availability: In Stock
Ships next business day
$1799
QTY
Phototools
MFR Part #: LHT72
Samy's Part #: S-059974

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
Ships next business day
$899
QTY
Nikon
MFR Part #: 4960
Samy's Part #: S-013915

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
Ships next business day
$3495
QTY
Sony
MFR Part #: ALCSH129
Samy's Part #: S-060864

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.


Compatible with:

Sony Sonnar
...
Availability: In Stock
Ships next business day
$3799
QTY
Promaster
MFR Part #: 2538
Samy's Part #: S-046201

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 72mm Universal Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$199
QTY
Nikon
MFR Part #: 4941
Samy's Part #: NIKO4941

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
Ships next business day
$1795
QTY
Nikon
MFR Part #: 4685
Samy's Part #: NIKO4685

Designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens.

Twist-lock mounting for extra security.

Adds extra protection from accidental impact.
Availability: More In Transit
$1995
QTY
Canon
MFR Part #: 5185B001
Samy's Part #: S-022225

Hoods offer several benefits to the photographer. The Canon EW-72 Lens Hood for EF 35mm f/2.0 IS USM Lens shades the lens from stray light that may result in an unwanted discoloration or hazing of the image, or the appearance of lens flare. Shading your lens helps improve contrast and image quality....
Availability: In Stock
Ships next business day
$5400
QTY
Canon
MFR Part #: 1277C001
Samy's Part #: S-044014

The Canon EW-73D Lens Hood is especially designed for the Canon EF-S 18-135mm f/3.5-5.6 IS USM lens and minimizes flare by deflecting stray light from entering lens. It provides protection to the lens from accidental impacts, bumps, and scratching.
Availability: In Stock
Ships next business day
$3495
QTY
Canon
MFR Part #: 2660A001
Samy's Part #: CANO2660A002

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: In Stock
Ships next business day
$2499
QTY
Canon
MFR Part #: 8268B001
Samy's Part #: S-024317
The Canon EW-63C Lens Hood for EF-S 18-55mm f/3.5-5.6 IS STM Lens is designed to prevent stray light from entering the lens in order to keep unwanted glare from affecting your photographs.
Availability: In Stock
Ships next business day
$2288
QTY
Promaster
MFR Part #: 4155
Samy's Part #: S-046189

The Promaster 52mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
QTY
Canon
MFR Part #: 3448C001
Samy's Part #: S-062119

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from
...
Availability: More In Transit
$4995
QTY
Canon
MFR Part #: 6319B001
Samy's Part #: S-019771

The Canon EW-54 Lens Hood for EF-M
EF-M 18-55mm IS STM Lens is a shade for the EF-M 18-55mm IS STM Lens, which is compatible with Canon's EOS-M mirrorless digital camera. It prevents stray light from entering the lens, thus reducing glare and lens flare for better visibility and image
...
Availability: In Stock
$2900
QTY
Fujifilm
MFR Part #: 16144523
Samy's Part #: S-011376

The LH-X100 Lens Hood with Adapter Ring from Fuji is for the X100 camera. This metal adapter ring replaces the lens ring that comes with the camera and bayonet mounts with the lens hood. In addition to bayoneting with the hood, it can also be used for mounting 49mm filters.

The metal lens hood...
Availability: In Stock
Ships next business day
$6999
QTY
Promaster
MFR Part #: 7288
Samy's Part #: S-046092

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster EW-83L Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
Ships next business day
$4995
QTY
Phototools
MFR Part #: LHT55
Samy's Part #: S-059970

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
Ships next business day
$899
QTY
Canon
MFR Part #: 9530B001
Samy's Part #: S-035509

The Canon EW-83M Lens Hood designed to prevent stray light from entering the lens, in order to keep unwanted glare from affecting your photographs. The hood is specifically designed for the EF 24-105mm f/3.5-5.6 IS STM lens.

Features:
  • Prevent stray light from entering the lens
  • Designed spe
...
Availability: In Stock
Ships next business day
$4000
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]