CONTACT US AT 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SMBND
Samy's Part #: S-013647

These Rode Silicone Replacement Bands are used for replacing worn or damaged bands on the Rode SM3, SM4 and SM5 shockmounts.
Availability: In Stock
$500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICON5
Samy's Part #: S-014711

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.
Availability: In Stock
$2700
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM3-R
Samy's Part #: S-048321

The Rode Microphones SM3-R Camera Shoe Shockmount is a suspension shock mount with camera shoe adaptor for mounting various RØDE microphones onto a camera via the standard hot/cold shoe mount.

The SM3-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations,...
Availability: In Stock
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MINIFURLAV
Samy's Part #: S-015370

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: In Stock
$2499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KCAMSSM
Samy's Part #: KTEKKCAMSSM

The K-Tek Camera Shoemounting Shock Mount for Sanken CS-1 is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb vibration...
Availability: In Stock
$7600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SMIS0030H
Samy's Part #: PSCPSMIS0030H

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3013
Samy's Part #: S-021087

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: In Stock
$4945
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMTS
Samy's Part #: S-047516

The K-Tek K-Mount Microphone Shock Mount Suspension System (Short Version) offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. This KMTS is the short version designed...
Availability: In Stock
$7600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 037303
Samy's Part #: RYCO037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 065103
Samy's Part #: S-047527

Rycote understands that capturing high-quality audio with lavalier microphones can be an art-form depending on the needs of the application. That is why we have designed a line of products for lavaliers using our signature wind and noise protection for the best possible audio in various low-profile...
Availability: In Stock
$1095
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 065101
Samy's Part #: S-047525

Rycote understands that capturing high-quality audio with lavalier microphones can be an art-form depending on the needs of the application. That is why we have designed a line of products for lavaliers using our signature wind and noise protection for the best possible audio in various low-profile...
Availability: In Stock
$1095
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW66PRO
Samy's Part #: SENNMZW66PRO

The Sennheiser MZW66PRO is a black velour windscreen for the ME66 Microphone.
$8495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: WMS-PRO + I
Samy's Part #: S-034183

Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhone®...
Availability: In Stock
$18500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1033
Samy's Part #: S-031772

The Calrad Collapsible Microphone 3 Leg Stand is polished chrome plated or black finish stem with 3/8 inches - 16 thread connector and a detachable 5/8" - 27 screw adapter for microphone holder. 3 leg base with fold able tubular legs. Boom sets accessories included with stand for greater adjustment...
Availability: In Stock
$7920
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: AT8415
Samy's Part #: AUDI8415

Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts Lightweight, low-profile design is ideal for "fishpole" booms and video use Equally adapted to cylindrical and tapered microphones Features a constant-tension clutch and 360 degree rotation Compatible with 3/8"-16...
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: AT8691
Samy's Part #: S-044847

The Audio-Technica Camera Shoe Dual Mount for ATW-R1700 Digital Wireless Receiver makes it easy to mount two ATW-R1700 System 10 digital wireless receivers to a camera's hot shoe, or to a tripod or other device with a ¼" screw. Comes with 280 mm (11.0") AT8351 dual mono to stereo coiled cable (dual...
$7900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: PG2-R
Samy's Part #: S-048962

The Rode Microphones SM4-R Suspension Shockmount is a perfect Pistol Grip Shock Mount designed to reduce handling noise when recording with shotgun microphones in hand held or boompole mounted applications. The PG2-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any...
Availability: In Stock
$7900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WSVM
Samy's Part #: RODMWSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW60-1
Samy's Part #: S-033518

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
$32995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 505974
Samy's Part #: S-042178

The Sennheiser BA 30 Rechargeable Battery Pack is a rechargeable battery pack for evolution wireless D1 SK bodypack, SpeechLine Digital Wireless SL Bodypack DW & AVX SK Bodypack transmitters. It can be used instead of two AA size batteries that power the transmitter-unit. The BA 30 uses a lith...
Availability: In Stock
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCATVMP+
Samy's Part #: S-057167


The Rode DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed for use in windy environments.

Designed to reduce wind noise when recording outdoors, the DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber

...
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMICF
Samy's Part #: S-051473

The K-Tek KMICF Mic Flag (Square, Black) is a square microphone ID flag that fits any handheld, ENG microphone. It is ready to receive adhesive logos and other branding on four surfaces, each 2.5" x 2.5" (6.35cm x 6.35cm). The black Mic Flag comes with two foam inserts for optimized hold on all...
Availability: In Stock
$1425
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW400
Samy's Part #: SENNMZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
$3995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM6
Samy's Part #: S-030819

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 065102
Samy's Part #: S-047526

The Rycote Undercover - Lavalier Wind Cover (Gray) is the perfect solution to completely hide lavalier microphones. Used with the included Stickies, these soft, fabric discs are designed to minimize the sound of clothing movement while providing protection from light wind. The adhesive is peeled...
Availability: In Stock
$1095
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WSLAV
Samy's Part #: S-015373

The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent.
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$4860
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 173B
Samy's Part #: MANF173B

This Manfrotto Mini-Boom Arm it has a 20mm diameter, is manufactured of aluminum and features a black finish. It has a length just under 43". It is also lightweight at only .71 lbs.

Features:
  • Diameter: 20mm 
  • color: black color
  • length: 42.91 in
  • material: aluminum 
...
$2099
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KE79CCR
Samy's Part #: S-031220

The K-Tek KE79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled) has a collapsed length of 1'8″/51cm and an extended length of 6'7″/201cm and only weighs 1.45lbs/658g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: On Backorder
$25650
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]