MFR Part #: 429301
Samy's Part #: MATT429301
Manufactured with the exclusive Matthews Posi-V-Lock design. 1-1/8" female to 5/8" female.
Availability: In Stock
$3495
MFR Part #: GP1001
Samy's Part #: S-054743
The GTX Studio Steel Male To 1/4 Female 3/8 Adapter is a small adapter used to convert a male 3/8 inch stud to a male ¼ x 20 stud. It is a very useful accessory for tripods, rigs and light stands. With this useful accessory in your kit, adaptation on the spot is always possible.
Availability: In Stock
$495
MFR Part #: 350629
Samy's Part #: S-028879
This clever adapter with Matthews 1/4-20 Male Bottom & 1/4-20 Female Top for NOGA Arm allows you to make quick changes to your equipment without having to mess with screws and threads. In low light, tight spaces or no time to lose, pull back the red sleeve and drop your preloaded monitor, mic, light...
Availability: In Stock
MFR Part #: YA028
Samy's Part #: S-034610
The Phototools Rapid Adapter fits any light stand with a 5/8" top stud and will allow vertical or horizontal mounting of a light fixture, flash or camera with a standard 1/4" thread.
Availability: In Stock
$999
MFR Part #: 429779
Samy's Part #: S-005627
The Matthews Baby Pin 5/8" with 3/8" Threaded Tip screws into a female 3/8" hole and provides an industry standard 5/8" (16mm) baby pin use with Lightweight Telescoping Hangers. Baby pins can be used with a variety of grip equipment including standard grip heads, lightweight telescoping hangers...
Availability: In Stock
MFR Part #: KG009112
Samy's Part #: S-045016
The Kupo Snap-In Right Angle Pin features a hex pin on one side for the Convi & Super Viser Clamp Systems and a baby stud for easy mounting of your lighting fixtures or accessories.
Features:
- Made of high quality material for extra strength
- Features a hex pin on one side for the Convi & Super
Availability: In Stock
$1895
MFR Part #: 209632
Samy's Part #: MATT209632
Snap in Pins for mounting of lighting fixtures. These 5/8" pins fit most motion picture and still photographic instruments.
Availability: In Stock
$953
MFR Part #: MC1007
Samy's Part #: S-053242
The Phototools 5/8" Snap-in Pin for Super Clamps (Black) has a 5/8" (16 mm) spigot (non-threaded) attachment one end, and the hexagonal Super Clamp type fitting on the other end. It can be used to connect a lighting fixture that has a 5/8" female receptor to a Super Clamp. It is constructed from...
Availability: In Stock
$699
MFR Part #: 01438
Samy's Part #: MANF01438
The Manfrotto 01438 Rapid Adapter fits any light stand with a 5/8" top stud, and will allow vertical or horizontal mounting of a light fixture, flash, or camera that has a 3/8" thread.
Replaces item # 3102
Availability: In Stock
$1095
MFR Part #: RS3128
Samy's Part #: DOTLRS3128P
$695
MFR Part #: MC1005A
Samy's Part #: S-053238
Snaps into a Super Clamp socket. Use it to mount cameras, directly or with a camera head. It has a 1/4" screw thread.
Availability: In Stock
$499
MFR Part #: 429493
Samy's Part #: S-022808
Most TV lighting instruments have a hole in the yoke for the mounting of a C-Clamp. When one of these fixtures needs to be mounted on a stand, the TVMP Adapter makes this easy. With an external diameter to fit into a Junior receiver, and a 5/8 ft. female bore for mounting on a Baby pin, the threaded...
Availability: In Stock
MFR Part #: 2002710
Samy's Part #: S-018672
The MICROgrip 1/4 in. to 5/8 in. Adapter is a pin used to convert 1/4 in. tapped threading to 5/8 in.
Availability: In Stock
$1238
MFR Part #: 013
Samy's Part #: MANF013
This adapter can be screwed into either of the standard female mounting threads, 3/8" or 1/4" x 20. The main part of the stud is a standard 5/8" which will fit the mounting bracket of most light units.
* Replaces item # 3094
Availability: In Stock
$799
MFR Part #: RS3114
Samy's Part #: DOTLRS3114P
$695
MFR Part #: 03638
Samy's Part #: MANF03638
Snaps into a Super Clamp socket. Use it to mount cameras, directly or with a camera head. It has a 3/8 in screw thread.
* Replaces item # 2918
Availability: In Stock
$514
MFR Part #: MC-1001B
Samy's Part #: S-053237
This brass Phototools Double End Stud Adapter can be screwed into either of the standard female mounting threads, 3/8" or 1/4" x 20. The main part of the stud is a standard 5/8" which will fit the mounting bracket of most light units.
Availability: In Stock
$799
MFR Part #: 01414
Samy's Part #: MANF01414
The Manfrotto 01414 Rapid Adapter fits any light stand with a 5/8" top stud. It will allow vertical or horizontal mounting of a light fixture, flash, or camera that has a 1/4-20" thread.
Replaces item # 3105
Availability: In Stock
$1095
MFR Part #: YA024
Samy's Part #: S-034601
The Phototools Stand Adapter allows you to convert a Junior 1-1/8 inch female receptor to a standard 5/8 inch male stud.
Availability: In Stock
$1599
MFR Part #: 350633
Samy's Part #: S-028882
This small, compact Matthews Head Adapter for Noga Arm has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your NOGA Arm and with just two fingers you can quick and easily turn the non-slip wheel to add or remove your camera or accessories....
Availability: In Stock
$3900
MFR Part #: 861833
Samy's Part #: S-028884
This clever Matthews 3/8 To 5/8 Baby Adapter allows you to make quick changes to your equipment and gives you the option to convert 3/8 to 5/8 threaded system to mount your equipment with lot more options.
Availability: In Stock
$2799
MFR Part #: 429492
Samy's Part #: MATT429492
Most TV lighting instruments have a hole in the yoke for the mounting of a C-Clamp. When one of these fixtures needs to be mounted on a stand the TVMP Adapter makes this easy. With an external diameter to fit into a Junior receiver and a 5/8" female bore for mounting on a Baby pin the threaded...
Availability: In Stock
$1600
MFR Part #: 388210
Samy's Part #: MATT388210
In the few short years that the Magic Finger has been out in the market, it has become one of the most popular grip accessories of all time. The 5/8" pin attached to the ball joint pivots from -15deg. to +90deg. while the collar rotates 360 deg. All axis lock positively with the one locking handle....
Availability: In Stock
MFR Part #: 153
Samy's Part #: MANF153
This Manfrotto 153 Adapter enables more secure mounting of a Mole Richardson Baby series fixture to the top of a stand that has a standard 5/8" top stud. Its unique indentations mesh perfectly with the locking screw of the Mole fixture. It is 3.46" (8.8 cm) long. This item replaces old catalog...
Availability: In Stock
$1295
MFR Part #: YA029
Samy's Part #: S-034611
The Phototools Rapid Adapter fits any light stand with a 5/8" top stud and will allow vertical or horizontal mounting of a light fixture, flash or camera that has a 3/8" thread.
Availability: In Stock
$999
MFR Part #: 061
Samy's Part #: MANF061
The Manfrotto 061 Joining Stud permits 2 Manfrotto, Avenger, Matthews or Impact Super Clamps to be joined with their jaws at six different locking positions to each other.
* Replaces part # 2913
Availability: Special Order
MFR Part #: RS3129
Samy's Part #: DOTLRS3129P
$695
MFR Part #: 209644
Samy's Part #: S-018673
The Matthews Baby 2Fer Triple 5/8 in. to 2 5/8 in. Adapter is a strong and versatile way of adapting 5/8" females or grip heads into two or three 5/8" male pins.
Availability: In Stock
$1995
MFR Part #: E200
Samy's Part #: AVENE200
This E200 Cine Stand Adapter fits into the 1-1/8" female receptor on heavy-duty light stands and grip clamps. It tapers to a fixed 5/8" diameter stud, which is the standard mounting size for most photographic and video light fixtures.
Availability: Special Order
MFR Part #: 036MR
Samy's Part #: MANF036MR
For use with the Super Clamp. Ends in a 5/8" stud, and has a hole to insert a safety cable, for use when hanging a light fixture.
* Replaces part # 2898
Availability: In Stock
$995
MFR Part #: 061RA
Samy's Part #: MANF061RA
Joins two Super Clamps -- sets the jaws at 90° angles to each other. Useful for making frames or mounting heavy duty crossbars.
* Replaces part # 2897
Availability: Special Order
MFR Part #: 429029
Samy's Part #: MATT429029
Machined from solid steel The Stand Adapter is exceptionally strong. Used to convert Junior 1-1/8" female to Baby 5/8" male.
Availability: In Stock
$2320
MFR Part #: RS5059
Samy's Part #: S-009799
This very handy mounting adapter attaches to a standard light stand and mounts anything from a piece of cardboard (used to block extraneous light from getting into the picture frame) to a pop-out style reflector or background. Mouth of clamp opens up to 9/16" wide. Fits light stand spigot up to...
Availability: In Stock
$1195
MFR Part #: 209645
Samy's Part #: S-018674
The Matthews Baby 3Fer Triple 5/8 in. to 3 5/8 in. Adapter is a strong and versatile way of adapting 5/8" females or grip heads into two or three 5/8" male pins.
Availability: In Stock
$2245
MFR Part #: 350628
Samy's Part #: S-028880
This clever Matthews Quick Release Adapter for NOGA Arm allows you to make quick changes to your equipment without having to mess with screws and threads. In low light, tight spaces or no time to lose, pull back the red sleeve and drop your preloaded monitor, mic, light or whatever into the Quick...
Availability: In Stock
$4500
MFR Part #: 350632
Samy's Part #: S-028881
The Matthews 1/4-20 Male Extra Top Mount allows you to make quick changes to your equipment without having to mess with screws and threads. The riser is made with the best material and has a soft pad to avoid scratches to the valuable equipment.
Availability: In Stock
$1900
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE