CONTACT US AT 800-321-4726
FOUND: 0
SORT BY:
# PER PAGE:
Matthews
MFR Part #: 429617
Samy's Part #: S-035547

The Matthews Junior Triple Header is especially useful when several light fixtures are needed in a relatively small amount of floor space. These headers are mounted on the light stand and allow four objects to be mounted on the Baby Double Header and five on the Baby Triple Header. The Junior...
Availability: Special Order
Matthews
MFR Part #: H386021
Samy's Part #: MATTH386021

Junior & Senior Stands ? Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8? Posi-V-Lock female with pop up 5/8? male receiver....
Availability: Backordered
$29280
QTY
Kupo
MFR Part #: KG003712
Samy's Part #: S-064967

The Kupo Junior 4" Wall Plate allows you to mount a 1-1/8" (28mm) receiver on a wall, other flat surface or just about anywhere. This plate gives you the option of mounting it by using screws or nails through any of the 8 anchor points pre-drilled into the plate. Attached to a wood or metal base
...
Availability: In Stock
Ships next business day
$2100
QTY
Matthews
MFR Part #: H386033
Samy's Part #: S-004178

Designed for larger lighting fixtures, the Matthews Junior Triple Riser Rolling Steel Stand is built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1-1/4" Posi-V-Lock female receiver with...
Availability: Backordered
$34160
QTY
Arri
MFR Part #: l20034025
Samy's Part #: S-066576

The Arri Orbiter Yoke Manual with Spigot Junior Pin is required to mount Orbiter to Light Stand (combo stand) or to hang from studio grid with Junior Pipe Clamp. Junior Pin diameter is 1 1/8".

Availability: In Stock
Ships next business day
$26600
QTY
Matthews
MFR Part #: H386022
Samy's Part #: MATTH386022

Junior & Senior Stands: Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8" Posi-V-Lock female with pop up 5/8" male receiver....
Availability: Backordered
$38700
QTY
Avenger
MFR Part #: F830
Samy's Part #: AVENF830

This Avenger F830 Junior to Baby Swivel Pin adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. The ball joint allows 180° swivel of the fixture, while the large handle provides secure locking in...
Availability: In Stock
$5199
QTY
Matthews
MFR Part #: 427803
Samy's Part #: S-003199

The largest and heaviest duty Matthews Junior Boom (5.6-10 ft.) measures 68 inches (172cm) when fully collapsed and will extend to over 10 feet (300cm). The Junior Boom has a 25-pound (12kg) counter-balance weight attached and features the same tilt-locking and mounting mechanism found on the...
Availability: Special Order
$35870
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 429301
Samy's Part #: MATT429301

Manufactured with the exclusive Matthews Posi-V-Lock design. 1-1/8" female to 5/8" female.
Availability: In Stock
Ships next business day
$3495
QTY
Matthews
MFR Part #: 429619
Samy's Part #: MATT429619

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin attached....
Availability: Special Order
Avenger
MFR Part #: C100
Samy's Part #: S-033319

The Avenger C100 Junior Pipe Clamp with Tommy Bar and Pad
is a pipe clamp that locks onto 7/8 - 2 1/8" diameter pipes. It has a 1 1/8" in Junior receptor and a cable reinforcement lock.
Availability: In Stock
$7299
QTY
Phototools
MFR Part #: YA040
Samy's Part #: S-034609

The Phototools 4.5" Grip Head with Junior Pin and receiver is designed to allow a junior roller stand to securely support large butterfly and overhead frames.

Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$4900
QTY
Matthews
MFR Part #: 430127
Samy's Part #: MATT430127

The Matthews Hollywood Junior Offset Arm with 1-1/8" Receiver is a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set. The Baby Extendable Offset Arm terminates in double 5/8" pins and the...
Availability: Special Order
$11000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]