CONTACT US AT 800-321-4726

CM-N3-ACC Canon 3' Remote Camera Cable

Samy's Part #: LPAD802453
In Stock
Select Size:




Rate & Review

The PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable is a special remote shutter release cable called a Pre-Trigger cable. A pre-trigger cable controls both the half-press and full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position.This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.

A Standard Cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. (Using a CM-N3-ACC cable with a MSMM Adapter will provide the same function as a CM-N3 cable.)

A -P Cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the remote camera's position, but not from the transmitting radio. (Using a CM-N3-ACC cable with a PTMM Adapter will provide the same function as a CM-N3-P cable.) PlusX: Use this cable with the PlusX to trigger the camera.

Compatible with cameras using Canon's N3 Remote Terminal including: EOS 10D, EOS 1D Mark II N, EOS 1V,  EOS 20D, EOS 10D, EOS 20Da, EOS 3, EOS 30D, EOS 40D, EOS 50D, EOS 5D, EOS 5D Mark II, EOS 5D Mark III, EOS 6D Body, EOS 70D EF-S 18-55mm IS STM Kit, EOS 7D Body, EOS D30, EOS D60, EOS-1D, EOS-1D MARK II, EOS-1D Mark III, EOS-1D Mark IV, EOS-1D x, EOS-1Ds, EOS-1Ds Mark II, EOS-1Ds Mark III.

  • Plus III: Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button.
  • Plus II or MultiMAX with no -ACC port: Use the MSMM adapter with this CM-N3-ACC cable or use the CM-N3.
  • MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable.  As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly.  When the remote zone is disabled, the camera will enter its normal sleep modes.  The MultiMAX does not support the 2-stage trigger function.  FlexTT5: This cable is required for auto-relay mode with TTL, or other remote triggering with the FlexTT5.  Learn more here.  You can use a CM-N3-P cable or CM-N3 standard cable with a FlexTT5, but your remote camera will not be able to relay a TTL signal to speedlights.  The FlexTT5 does not support the 2-stage trigger function.

Customers Also Browsed

  • PocketWizard - HSFM3 Flash Sync 3ft. Cable
  • Canon - ST-E3-RT Speedlite Transmitter
  • Canon - Speedlite Transmitter ST-E2
  • PocketWizard - PTMM Pre-Trigger Adapter
    Special Order
    Call to Order: 1-800-321-4726
  • PocketWizard - N10-ACC-1 Pre-Trigger Remote 1ft. Cable
  • Godox - X1R-S TTL Wireless Flash Trigger Receiver for Sony
  • Dot Line - Male PC to Female PC 1ft Straight
  • Sony - FA-MC1AM Off-Camera Flash Cable - to Connect Multiple Flash Units
  • Quantum Instruments - Qflash QF16 TTL Adapter for Leica R
  • Quantum Instruments - Qflash QF23 TTL Adapter for Leica R8
  • Digital Battery - DP6068 8 Volt Camera Connection Cable
  • Phase One - Profoto Remote Trigger Cable for 645DF Camera
    Special Order
    Call to Order: 1-800-321-4726
Cables Information
Length 3' (91.5 cm)
Be the First to write a Review.
See any errors? Let us know.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.