My Cart
Categories + Filters
*Item pictured for illustrative purposes only, actual item not pictured.
The yellow PocketWizard Plus III Transceiver is a highly versatile and robust radio trigger that is compatible with all prior FCC-version PocketWizards, as well as most flash and camera systems. Featuring 32 channels
*Item pictured for illustrative purposes only, actual item not pictured.
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Nikon i-TTL flash control system. It simply slides directly into the camera's
*Item pictured for illustrative purposes only, actual item not pictured.
Wizard MiniTT1 Transmitter is designed specifically for the Nikon i-TTL flash system. MiniTT1 works alongside the Flex TT5 transceiver and can support i-TTL operation around corners or in bright sunlight. The Wizard
Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 16" straight Miniphone to Miniphone Cable.
*Item pictured for illustrative purposes only, actual item not pictured.
The dedicated FlexTT5 Transceiver, with its built in hot-shoe and ControlTL? software, is the perfect addition to Canon E-TTL II flash systems. The FlexTT5...
*Item pictured for illustrative purposes only, actual item not pictured.
The MiniTT1 Radio Slave Transmitter for Canon E-TTL & E-TTL II is a very useful and a good quality Transmitter by its manufacturer PocketWizard. The smallest...
Motor drive cords connect to the camera's remote cable socket, and enable the Pocket Wizard radio slave to trigger the camera's shutter remotely. This pre-trigger cable is designed to keep the camera constantly "awake", and has the same effect as holding the camera's trigger button pressed down...
*Item pictured for illustrative purposes only, actual item not pictured.
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe,
Please Note: Old inventory, New, but packaging may show signs of age.
*Item pictured for illustrative purposes only, actual item not pictured.
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe,
The PocketWizard Motor Drive Cable Canon EOS T3 Connector to Miniphone enable the PocketWizard radio slave to trigger the camera's shutter. This cable is 3' long.
Works With:
- Canon EOS Rebel T3
Please Note: Old inventory, New but packaging may show signs of age.
*Item pictured for illustrative purposes only, actual item not pictured.
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe,
*Item pictured for illustrative purposes only, actual item not pictured.
The PocketWizard N10-ACC-D200 3' Remote Camera Cable is also compatible with the Plus X and Plus III. The cable connects to the camera's motor drive socket...
*Item pictured for illustrative purposes only, actual item not pictured.
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe,
*Item pictured for illustrative purposes only, actual item not pictured.
Please Note: Old inventory, New but packaging may show signs of age.
The Pocket Wizard NM4-P Pre-Trigger Motor Drive Cord connects to the camera's remote cable socket, and enables your Pocket Wizard radio slave SET to trigger the camera's shutter remotely. This pre-trigger cable is designed to keep the camera constantly "awake", and has the same effect as holding...
*Item pictured for illustrative purposes only, actual item not pictured.
When you add the PocketWizard AC3 ZoneController for Nikon to your on-camera MiniTT1 Transmitter or FlexTT5 Transceiver, you instantly have three zones of flash control. Whether in CLS/i-TTL or Manual mode, you have
Please Note: Old inventory, New, but packaging may show signs of age.
The PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable is a special remote shutter release cable called a Pre-Trigger cable. A pre-trigger cable controls both the half-press and full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s...
Compatible with Plus III, MultiMAX II, later PocketWizard radios, Sony cameras like the a7R III and others with a Sony Multi/micro-USB terminal, the PocketWizard Remote Trigger Cable for Sony permits owners to remotely trigger their Sony cameras, while it also lets the photographer control the...
The PocketWizard S-RMS1AM-P Remote Pre-Trigger Cable for Sony Camera Electronic Shutter Release Cable allows remote operation of Sony or Minolta cameras that utilize the RMS1AM electronic cable release connection from a PocketWizard radio transmitter. The P version includes a Pre-Trigger mode...
The PocketWizard HSFM3 Flash Sync 3ft. Cable is for remotely triggering a flash via a standard hot shoe to any flash equipped with a PC terminal or for connecting a camera or lens PC terminal to a transmitting PocketWizard radio. The cable length remains 3 foot in normal coiled condition and has...
The AC3 ZoneController for Canon is the gem of the ControlTL product line. Add it to your on-camera MiniTT1 Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control. Whether working in E-TTL II or Manual mode, you now have control over all your flashes directly...
*Item pictured for illustrative purposes only, actual item not pictured.
When you add the PocketWizard AC3 ZoneController for Nikon to your on-camera MiniTT1 Transmitter or FlexTT5 Transceiver, you instantly have three zones of flash control. Whether in CLS/i-TTL or Manual mode, you have
The AC7 RF Shield for FlexTT5 solves the problem of limited performance of the FlexTT5 radio transceiver when operated using the Canon 580EX, 580EX II and 430EX flashes, caused by interference emanating from the flashes.
The AC7 is a hard plastic shield with a special RF coating that effectively...
The PocketWizard S-RMS1AM Remote Camera Cable For Sony Electronic Shutter Release Cable allows remote operation of Sony or Minolta cameras that utilize the RMS1AM electronic cable release connection from a PocketWizard radio transmitter. The P version includes a Pre-Trigger mode keeps the camera...
The Pocket Wizard N-MCDC2 Motor Cord is used with the Pocket Wizard radio slaves to provide remote shutter activation to Nikon cameras with the DC2 connection, such as the D90 & D5000.
Necessary when using the Pocket Wizard slaves to remotely fire Nikon cameras with the DC2 connection (as of this...
Although PocketWizard transceivers can communicate with each other wirelessly, they need a connecting cord to talk to your flash and to your camera when used as a camera trigger. These cords are designed specifically for the task and provide the same reliability as your PocketWizard transceiver.
...
The PocketWizard G-Wiz Vault Gear Bag is the perfect organization tool for your PocketWizard radios, accessories and cables. The durable rip-stop nylon material and movable padded interiors provide extra comfort for your radios when traveling.
The new PocketWizard G-Wiz Vault bag holds up to six MultiMAX...
The PocketWizard G-Wiz Vault Gear Bag is the perfect organization tool for your PocketWizard radios, accessories and cables. The durable rip-stop nylon material and movable padded interiors provide extra comfort for your radios when traveling.
The new PocketWizard G-Wiz Vault bag holds up to six MultiMAX...
The perfect case for PocketWizard MiniTT1 and FlexTT5. This attractive new case is constructed of durable, padded, rip-stop nylon. The three-side zipper enables full opening making the contents easy to see and handle. The radios can be placed between the dividers or the dividers can be removed...
