CONTACT US AT 800-321-4726

MicroSync II VM2T Wireless Transmitter

MFR Part #: VM2T
Samy's Part #: S-018692
This Item Is No Longer Available




Items Included

Rate & Review

The MicroSync II VM2T Wireless Transmitter is a part of a super lightweight system with a tiny form factor which can easily be your solution to a tangle of PC cords in the studio or on location.

The transmitter and receiver (purchased separately) are capable of firing your strobe from distance of 200'. Just slip the tiny transmitter on your camera and plug the (optional, required) receiver into your flash, select a channel (there are 16) and you're ready to shoot. Forget about on/off switches; there aren't any. This smart system goes on instantly the second you hit the shutter release and automatically shuts down when not in use, dramatically extending battery life, in the transmitter's case, up to 3 years. The system, which operates on 433MHz, has a maximum focal plane flash sync of 1/200 sec (depending on the camera in use) and a maximum leaf shutter sync speed of 1/350 sec.

Besides flash, the MicroSync II can also fire most DSLR cameras which have an electronic shutter release input. Just purchase the required MicroSync receiver and the optional, dedicated camera cord. It's great for wildlife or surveillance.

The Freedom of Wireless
Whether you're shooting in the studio or on location, firing your strobes with a sync cord can be impractical, inconvenient, and sometimes even impossible. Not anymore! The MicroSync II allows you to fire strobes wirelessly. Now you can liberate yourself from the limitations of your sync cord.
Ultra-small, Light and Convenient
The MicroSync II is revolutionary because it is super miniature, extremely lightweight, and almost operates itself. Just place the transmitter in the hot shoe of your camera, plug the receiver (purchased separately) into your strobe's power pack and fire! It's that easy.
Automatic Power Management
The MicroSync II has a unique automatic power management system. There are no on/off switches on the transmitter or receiver. When you press the shutter, the transmitter turns itself on and sends the signal to the receiver to fire your lights. Both units then turn themselves off - all in milliseconds! As a result, the battery life of the coin cell in the transmitter is anticipated to be 3 years. With the automatic power management system, you never have to worry about leaving the unit on and running down your batteries.
16 Channels
There are sixteen channels on the MicroSync II to allow you to shoot without interference from other MicroSync II users in close proximity.
200' maximum range.
Fire a DSLR Camera
The MicroSync II can remotely fire most DSLR cameras that have an electronic shutter release input. To do this, you will need a camera firing cord for your DSLR. MicroSync II camera firing cords are available for most Canon, Nikon and Pentax digital and film SLRs.
Common Uses
  • Remotely fire a PC terminal-equipped flash (such as Nikon's SB-26, SB-28, SB-80, SB-800, SB-900 or Canon's 580EX II)
  • Fire a remote light and a hot shoe mounted flash simultaneously
  • Fire strobes remotely using a PC terminal equipped light meter
  • Fire strobes remotely from PC terminal-equipped medium format cameras and lenses
  • Customers Also Browsed

    • Godox - X1C TTL Remote Controller Kit for Canon
    • PocketWizard - PlusX 2 Pack
    • Phottix - Ares II Wireless Flash Trigger with Kit Transmitter and Receiver
    • Nikon - WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
    • Godox - X1N TTL Remote Controller Kit for Nikon
    • RPS Studio - Wireless Shutter Release for Select Nikon Cameras
    • Profoto - Air Remote TTL-C for Canon
    • Nikon - WR-R10 Wireless Remote Controller Transceiver
    • Nikon - WR-A10 Wireless Remote Adapter
    • PocketWizard - Plus III Transceiver
    • PocketWizard - PowerMC2 Receiver Module
    • Nikon - WR-1 Wireless Remote Control Transceiver
    Remote Transmitters Information
    Operating Range 200' (60 m)
    Channels 16
    Power Source CR2032
    Dimensions 2.13 x 0.9 x 1.26" (54 x 23 x 32 mm)
    Weight 0.7 oz (20 g)
    • CR2032 Battery
    • 1 Year Manufacturer's Warranty
    Be the First to write a Review.
    See any errors? Let us know.
    Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
    Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.