CONTACT US AT 800-321-4726
Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned
Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned
$29200
3 Legged Thing

3 Legged Thing Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned

MFR Part #: S-071243
Samy's Part #: S-071243
Limited to stock-on-hand
  • Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned Image 0
  • Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned Image 1
Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned Thumbnail 0 Albert 2.0 Tripod Kit with Pro Ball Head - Pre-Owned Thumbnail 1
Availability: In Stock
Ships next business day
QTY
$29200
Select Size:

Description

Rebates

Rate & Review


*Item pictured for illustrative purposes only, actual item not pictured.

This 3 Legged Thing Tripod Kit includes an Albert 2.0 Tripod and Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 52.9" height or can be combined with the center column to form a monopod with up to 78.1" in height.

Tripod heads such as the AirHed Pro Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Albert 2.0 Tripod. When combined and configured as a tripod, the Albert 2.0 Tripod and AirHed Pro Ball Head supports up to 66.0 lb and measures 16.9" when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Albert 2.0 Tripod and AirHed Pro Ball Head can be set at a minimum height of 7.8" when the tripod's 3-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 52.1" or 75.1" with the center column fully raised along with the ball head. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Albert 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

The AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

Tripod and Ball Head

  • Arca-type ball head and carbon-fiber tripod with 3/8"-16 mount
  • Tripod features three detachable legs and removable center column
  • With ball head, each leg can be configured as a monopod with up to a 52.9" height or can be combined with the center column to form a monopod with up to 78.1" height
  • Tripod configuration with ball head, supports up to 66.0 lb
  • Push-and-pull center column for rapid camera, lens, or sport optic positioning
  • Center column D-ring to accommodate ballast for additional stability
  • Can be set for a minimum height of 22.4" or 7.8" without the center column
  • With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 52.1" or 75.1" with the center column fully raised
  • Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
  • Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
  • Legs can be locked at 23, 55, or 80° angles
  • Rubber feet help to enhance stability on a wide variety of surfaces
  • Weighs 4.8 lb and measures 16.9" when all three legs are reversed 180° and folded
  • Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
  • Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
  • 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
  • Ball head microfiber bag
  • Tripod kit carry bag with strap for storage and transport

AirHed Pro Ball Head

  • Arca-type ball head with 88 lb load capacity
  • Compatible with tripods or support systems that feature a 3/8"-16 mount
  • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
  • Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
  • Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
  • Secondary locking knob with knurled surface allows head to rotate 360°
  • Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
  • Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates
  • Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations
  • Durable magnesium alloy construction

QR-OCTA Quick Release Plate

  • Compatible with Arca-type quick release clamps
  • 1/4"-20 mount
  • Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Ball Head
  • Durable, aluminum alloy construction

Customers Also Browsed

  • SL66E Body w/ Prism, 120/220 Back, 40mm f/4, 50mm f/4, 80mm F/2.8 & 150mm f/4 & Extras - Pre-Owned
    Rollei - SL66E Body w/ Prism, 120/220 Back, 40mm f/4, 50mm f/4, 80mm F/2.8 & 150mm f/4 & Extras - Pre-Owned
    $8,100.00
  • Genus Hurricane Rig 3D System Kit  - Pre-Owned
    Genus - Genus Hurricane Rig 3D System Kit - Pre-Owned
    $3,500.00
  • Pradovit D-1200 Home Theater Projector With Lens - Pre-Owned
    Leica - Pradovit D-1200 Home Theater Projector With Lens - Pre-Owned
    $3,150.00
  • INKA 11' Professional Studio Camera Stand - Pre-Owned
    - INKA 11' Professional Studio Camera Stand - Pre-Owned
    Call For Price:
    1-800-321-4726
    Call For Price
    Call 1-800-321-4726
  • NA-BMCC Underwater Housing for Blackmagic Cinema Camera - Pre-Owned
    Nauticam - NA-BMCC Underwater Housing for Blackmagic Cinema Camera - Pre-Owned
    $3,000.00
  • Verso A2 RFS 1200 Watt/Second Power Pack B-31.031.07 - Pre-Owned
    Broncolor - Verso A2 RFS 1200 Watt/Second Power Pack B-31.031.07 - Pre-Owned
    $2,700.00
  • 3D Level Head with Quick Release Plate - Pre-Owned
    Linhof - 3D Level Head with Quick Release Plate - Pre-Owned
    $1,500.00
  • 28TI Camera with 28mm f/2.8 Black - Pre-Owned
    Nikon - 28TI Camera with 28mm f/2.8 Black - Pre-Owned
    $1,449.00
  • Lens Control S Unit for Electronic Shutters - Pre-Owned
    Rollei - Lens Control S Unit for Electronic Shutters - Pre-Owned
    $1,400.00
  • Pro 7 Ringflash Lamphead - Pre-Owned
    Profoto - Pro 7 Ringflash Lamphead - Pre-Owned
    $900.00
  • Ranger RX Speed AS 1100Ws Portable Battery Pack Unit - Pre-Owned
    Elinchrom - Ranger RX Speed AS 1100Ws Portable Battery Pack Unit - Pre-Owned
    $800.00
  • Nano A4 2400Ws Power Pack - Pre-Owned
    Broncolor - Nano A4 2400Ws Power Pack - Pre-Owned
    $640.00
Be the First to write a Review.
See any errors? Let us know.
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]