CONTACT US AT 800-321-4726
STRATUS Complete Cage for Sony a7/a7R III Series Cameras
STRATUS Complete Cage for Sony a7/a7R III Series Cameras
$21880
ikan

ikan STRATUS Complete Cage for Sony a7/a7R III Series Cameras

MFR Part #: STRA7III
Samy's Part #: S-059435
  • STRATUS Complete Cage for Sony a7/a7R III Series Cameras Image 0
  • STRATUS Complete Cage for Sony a7/a7R III Series Cameras Image 1
STRATUS Complete Cage for Sony a7/a7R III Series Cameras Thumbnail 0 STRATUS Complete Cage for Sony a7/a7R III Series Cameras Thumbnail 1
Availability: More In Transit
QTY
$21880
Select Size:

Description

Rebates

Items Included

Rate & Review


The ikan STRATUS Complete Cage for Sony a7/a7R III Series Cameras is a new form-fitting camera cage direct from Ikan. The frame is shaped to accommodate the Sony a7 III and a7R III camera bodies. The cage comes in three main parts: the top handle, the base, and the camera frame.

The top handle mounts directly to the front of the cage frame. There are 42 1/4-20 mounts on the top handle when it is bare, but the grip can be covered with Ikan grips or, if custom grips are needed, can fit most bicycle handles. A 15mm rod can also be inserted into the end of the handle and held in place with a 1/4-20 screw through one of the many mounts. a cold shoe mount is located at the front of the handle, near where it connects to the frame's front. There are multiple mounting holes on the front of the frame for positioning the handle to either side to make room for accessories and audio adapters.

The base is simple and sleek, with mounts for two included 15mm rods (2x 200mm rods plus 2x 100mm extensions w/ couplings) and both 1/4-20 and 3/8-16 mounting points for tripod quick release plates. The locking knobs are large and solid, and have a kipping function that allows tightening even when the knobs are partially obstructed. The base locks to the frame with an Arca-Swiss style connection, and there are hard stops on either side to allow safe horizontal positioning. This base also has vertically positionable rods that have about 1" of play to better accommodate matte boxes, follow focuses, and lens supports to many styles of lens. There is a lock and track on the very bottom of the base for lightweight (15mm) dovetail plates, but note that not all dovetail plates conform to the same standard of size or manufacturing tolerances.

The camera frame is shaped specifically to the Sony a7 III-style body, with cutouts on top for button and dial access. Room has been made on the left and right sides of the cage for access to memory card slots, A/V inputs & outputs, and remote port access. There is also a cutout on the bottom of the cage over the battery port, allowing for quick swaps without having to unmount the cage. The cable clamp on the left side of the cage is positionable and universal, and can be used to support cables nearly anywhere on the camera's left-hand side. Finally, the Arca-Swiss style base connection is also compatible with many types of photo tripod quick-releases, which means that is can be mounted to a photo tripod instead of the tripod quick release plate if it is removed from the base.

Warning
WARNING
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
For more information, go to www.p65warnings.ca.gov.

Customers Also Browsed

  • Crane-2 3-Axis Stabilizer with Follow Focus for Canon DSLRs
    Zhiyun-Tech - Crane-2 3-Axis Stabilizer with Follow Focus for Canon DSLRs
    $549.00
  • 32
    Phototools - 32" Camera Slider
    $99.99
  • Freedom Car Mount System
    Matthews - Freedom Car Mount System
    $1,301.00
  • Cage for Panasonic Lumix DC-S1 and S1R
    SmallRig - Cage for Panasonic Lumix DC-S1 and S1R
    $99.00
  • Full Cage for Blackmagic Pocket Cinema Camera
    SmallRig - Full Cage for Blackmagic Pocket Cinema Camera
    $79.00
  • RD01 RailDolly Large Camera Slider
    RigWheels - RD01 RailDolly Large Camera Slider
    $275.00
    Special Order
    Call to Order: 1-800-321-4726
  • Double Handle Rig With Shoulder Pad
    Dot Line - Double Handle Rig With Shoulder Pad
    $108.00
  • MoveOver12 23.6
    Benro - MoveOver12 23.6" Dual Carbon Rail Slider with Flywheel
    $494.95
    Special Order
    Call to Order: 1-800-321-4726
  • Cage for Panasonic GH5/GH5S
    SmallRig - Cage for Panasonic GH5/GH5S
    $89.00
  • Master Mount System
    Matthews - Master Mount System
    $774.00
  • Cage Kit for Sony a7 III Series Cameras
    SmallRig - Cage Kit for Sony a7 III Series Cameras
    $145.99
  • Cage for Panasonic S1H
    SmallRig - Cage for Panasonic S1H
    $89.00
  • 1/4 in.-20 Mounting Screw
  • Cable Clamp
  • Cage Base
  • NATO Top Handle
  • 2 x 15mm Rod (4 in.)
  • 2 x 15mm Rod (8 in.)
  • Limited 1-Year Warranty
Be the First to write a Review.
See any errors? Let us know.
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]