CONTACT US AT 800-321-4726

Lightbridge 2.4GHz Full HD Digital Video DownloadLink

MFR Part #: CP.AL.000005
Samy's Part #: S-035195
This Item Is No Longer Available

Description

Rebates

Items Included

Rate & Review

Accessories


The DJI Lightbridge 2.4GHz Full HD Digital Video DownloadLink is an all new revolutionary 2.4G Full HD digital video downlink. DJI Lightbridge offers extremely powerful equipment packed into a small and light-weight form factor. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05miles) away, it's the ideal solution for the professional aerial photographer and FPV users. Set yourself free and remove the limits from low definition analog video transmitters.

The Lightbridge 2.4G Full HD Video Downlink with OSD and Control from DJI is designed to provide a complete FPV wireless relay solution, combining the video downlink, OSD (on screen display) data, and control signal in one system. It features two key components, one for the air end and one for the ground end. The air end component is a module that installs in or on the aircraft and features HDMI and composite video inputs. It also communicates with the flight computer, sending pilot inputs from the radio controller (transmitter) to the flight controller and receiving flight data from the instrumentation for the sake of the OSD. The air end module can also send a control signal to the gimbal for in-flight operation of camera movements.

The ground end component features the form factor of a wireless router. It can be battery powered from an internal 4000 mAh battery that lasts up to 4.5 hours or an external 3S to 6S Li-Po battery, available separately. To operate the aircraft, the system allows you to use your regular 2.4 GHz radio controller and will also receive a gimbal control signal. To view the video feed and OSD overlay you will need an Android mobile device running the Lightbridge app, a free download from DJI. There is a powered USB port on the ground end to connect your mobile device and keep its battery from running down.

Features:
  • Requires Compatible Flight Control System: Lightbridge works with select DJI multi-rotor flight control systems. Compatible flight controllers included: A2, WooKong-M, Naza-M V2, and Phantom 2
  • HDMI and AV Video Input with Full HD Transmission: The air-end module supports both analog composite and HDMI signals. When using HDMI resolutions of to 1080p at 30 fps can be transmitted
  • Low Latency: The video link features a latency of approximately 150ms. This makes the system suitable for FPV flying and aerial videography, where real-time feedback is essential
  • Up to One Mile Wireless Range: The air end module supports a line-of-sight range of up to a mile, depending on environmental conditions and other variables. Note: By law, in the U.S. and many other countries, pilot visual contact with the aircraft must be maintained at all times.
  • Built-in 2.4G Remote Control Link: Not only does Lightbridge relay video and OSD data back to the ground end, it also provides a way of extending the link between the transmitter (hand-held radio controller) and the aircraft. Plus, the Lightbridge system relays the gimbal control signal
  • 4.5 Hour Battery Life for Ground End: The ground-end features a transceiver that is similar to a Wi-Fi router. It can be wall-powered, but since you will most likely be using it in the field there is also a built-in 4000 mAh battery lasting up to 4.5 hours. The battery can be charged with the supplied AC adapter or a 3S to 6S Li-Po battery
  • USB 2.0 Port for Mobile Device: The USB port allows your Android smartphone or tablet to communicate with the ground end, and will display video from the camera on the mobile device's screen. Plus the port is powered so you don't have to worry about running down your device's battery. For Android users it is recommended you have Android 4.1.2 or above
  • Built-In OSD: The OSD (on screen display) is natively part of the Lightbridge system meaning a separate iOSD module is not required. The OSD supplies telemetry data supplied by the flight computer, including, attitude/relative position, height, distance, horizontal and vertical speed, flight mode, power levels, signal strength, and GPS strength
  • Anti-Interference Technology: Up to 8 downlinks can be connected for parallel streaming. Each can work independently without interference as long as proper spacing is maintained between them
  • Multi-Device Operation: A single air system can transmit to multiple ground systems, sending video to multiple screens at once. One ground system will send the control signal while additional ground systems receive the video signal only
  • Advanced Security: Guards against third-party interception of the wireless link or loss of control over the aircraft to a third party. Plus encryption can be setup through the Lightbridge app
  • 1x Air system
  • 1x Ground system
  • 2x Air system panel antenna
  • 3x Air system antenna
  • 1x Gimbal cable (A)
  • 1x micro HDMI cable
  • 1x DBus cable
  • 1x Air system Power & CAN cable
  • 1x AV cable
  • 2x Ground system antenna
  • 1x Charger
  • 2x Remote controller cables
  • 2x Rectangle headed training port cable
  • 1x micro USB cable
Be the First to write a Review.
See any errors? Let us know.
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]