Contact Us Store Locations Rental Locations Photo Books
FILTER BY
PRICE
Home  > STUDIO & LIGHTING  > Light Stands & Grip Equipment  >

Light Stand Accessories

Found: 0 Sort: # Per Page:
Part #: MVA523W
SYMPLA 6 in. Rods


The Manfrotto SYMPLA 6 in. Rods 150mm (5.9'') long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly. Rods can be united (u...

Availability: In Stock
 
PRICE: $49.99
Add To Wishlist
Quantity
Part #: 853276
Safety Cable, Back-up for Hanging Heavy Lighting Units

Arri Safety Cable for all Arri lights less than 2.0 lbs.
Availability: In Stock
 
PRICE: $9.95
Add To Wishlist
Quantity
Part #: L483021E
Arri | Complete Stirrup and Mount for Arri Lights | L483021E

A suitable method of hanging light fixtures from above, for unobstructed floor areas - the Arri Complete Stirrup and Mount for Arri Lights includes a vice clamp, stirrup, and safety pin. Two sections, one riser.
 
PRICE: $47.00
Part #: 501315
Arri | Accessory Holder for Arrilux 125 Pocket Par | 501315

The Arri Accessory Holder incorporates fittings that permit the Chimera Video PRO Plus S to be fitted directly, without an additional speedring. The accessory holder also enables usage of the 4-leaf barndoor and scrims designed for the Arrilux 125 Pocket Par.
 
PRICE: $53.95
Part #: E600
E600 - 5/8

The Avenger E600 Aluminum Snap-In Pin has a hexoganal end that snaps into a Super Clamp; the other end will accept a lighting fixture that has a 5/8" female receptor.
Availability: On Backorder
 
PRICE: $3.93
Add To Wishlist
Quantity
Part #: E600C
Avenger | E600C - 5/8

The Avenger E600C Steel Snap-In Pin has a hexoganal end that snaps into a Super Clamp; the other end will accept a lighting fixture that has a 5/8" female receptor.
Availability: On Backorder
 
PRICE: $4.05
Add To Wishlist
Quantity
Part #: E250
E250 - Long 5/8

16mm male adapter.
 
PRICE: $4.95
Part #: D050
D050 - Set Of 6 T-Tops

Rubber cover gives better grip for 80mm T-handles, even in cold weather.
Availability: In Stock
 
PRICE: $8.40
Add To Wishlist
Quantity
Part #: E650
Avenger | E650 Baby (5/8 In.) Pin with Collar - 6 In. | E650

The E650 Baby (5/8 In.) Pin with Collar - 6 In. is a very useful and a good quality Pin by its manufacturer Avenger. The collar acts as an anchor to prevent the pin from sliding completely through your grip clamp.
 
PRICE: $9.99
Part #: F800
F800 - 3-inch Baby Wall Plate

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: On Backorder
 
PRICE: $10.95
Add To Wishlist
Quantity
Part #: F805
F805 - 6-inch Baby Wall Plate

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: On Backorder
 
PRICE: $12.50
Add To Wishlist
Quantity
Part #: F808
9 inch Baby Wall Plate

This Avenger F808 6.0 in. Baby Wall Plate is a 3.5 x 5.87 in. chrome-plated steel plate with a welded 5/8 in. Baby pin. The plate has eight anchor points for nails or screws, which are not included. This item may be used on a wall or free-standing as a floor-level light mount.
Availability: On Backorder
 
PRICE: $16.95
Add To Wishlist
Quantity
Part #: F809
F809 - Wall Plate With 90 Degree Baby Pin

Unique to the Avenger line, this baby plate allows fixtures to be fine-tuned with the built in swiveling baby pin.
Availability: On Backorder
 
PRICE: $19.95
Add To Wishlist
Quantity
Part #: F300
F300 - Junior Wall Plate

A wall plate with a junior receiver to mount larger fixtures.
 
PRICE: $20.89
Part #: F825RH
F825RH - Baby Swivel Pin With Ratchet Handle

Baby Swivel Pin With Ratchet Handle adds position ability to your fixture.
Availability: In Stock
 
PRICE: $27.99
Add To Wishlist
Quantity
Part #: F810
3 inch Baby Plate With Swivel Spigot

The Avenger F810 Baby Plate with 5/8" Swivel Spigot is a steel plate with a swiveling 5/8" Baby pin with a large T-handle that allows precise positioning of a light or accessory. The F810 has eight anchor points for nails or screws. Hardware is not included.
Availability: In Stock
 
PRICE: $36.88
Add To Wishlist
Quantity
Part #: F830
Baby-To-Junior Swivel Pin

This Avenger F830 Junior to Baby Swivel Pin adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. The ball joint allows 180° swivel of the fixture, while the large handle provides secure loc...
Availability: In Stock
 
PRICE: $38.28
Add To Wishlist
Quantity
Part #: F820TH
F820TH - Snap-In Baby Swivel Pin With T Handle

Swivelling adapter can attach to your fixtures. Using the "T" Handle allows holding items in place and gives a range of possibilities in positioning.
 
PRICE: $39.88
Part #: F1501
F1501 - Styrene Clamp With 5/8

A foamcore support clamp to enable precise positioning. Mounts via a 16mm socket.
 
PRICE: $51.89
Part #: F830RH
Baby to Junior Swivel Pin with Ratchet Handle

This Avenger F830RH Baby to Junior Swivel Pin with Ratcheting Handle adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. Removing the stand tightening knob allows you to drop the 1 1/8" end in...
Availability: In Stock
 
PRICE: $53.89
Add To Wishlist
Quantity
Part #: F830TH
Baby to Junior Swivel Pin with T Handle

This Avenger F830 Junior to Baby Swivel Pin adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. The ball joint allows 180° swivel of the fixture, while the large handle provides secure loc...
Availability: On Backorder
 
PRICE: $53.89
Add To Wishlist
Quantity
Part #: D700B
D700 - Collapsible Reflector Holder

Positions and holds reflector for hands free use.
Availability: In Stock
 
PRICE: $56.88
Add To Wishlist
Quantity
Part #: F1000
F1000 - Pump Cup With Baby Swivel Pin

Ideal for mounting small lights and camera systems onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots.
Availability: On Backorder
 
PRICE: $69.99
Add To Wishlist
Quantity
Part #: H806EXT
Avenger | H806EXT Kit of 4-2 Feet Tube Fits to 6 Fabrics | H806EXT

The Avenger H806EXT Kit of 4-2 Feet Tube Fits to 6 Fabrics is a modular frame conversion Kit.
Availability: In Stock
 
PRICE: $154.99
Add To Wishlist
Quantity
Found: 0 Sort: # Per Page:
Photo School Los Angeles
Camera Rentals
Create A Photo Book
Apple Service and Repair
Used & Collectible Cameras
Photo Newsletter
Corporate Sales
Service Bureau
Sign Up To Win!
Call us toll free at 1-800-321-4726 for customer service & ordering.
Copyright © 2015 Samy's Camera. All Rights Reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors.
Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.