The Canon CN-E 30-300mm T2.95-3.7 L S EF Mount Cinema Zoom Lens is designed expressly for digital cinematography with cameras that have an APS-C or Super 35-equivalent sensor and a EF mount, including Canon's EOS C300. Featuring advanced optical technology designed by Canon, the lens is suitable for any capturing any size HD image up to and including 4K resolution.
With a focal length range of 30-300mm, the 10x cinema zoom lens is designed to cover the longer end of the focal lengths typically required by cinematic productions, and its maximum telephoto length of 300mm puts it among the best in its class. (The other zoom lens in the line, the CN-E 14.5-60mm T2.6 L S, covers the wider end.) Maximum aperture is a relatively fast T2.95 throughout much of its range, and the 11-blade iris enables a smooth bokeh for out-of-focus areas of the frame.
The lens was designed with working professionals in mind, with easy-to-read focus, zoom, and iris markings engraved into angled surfaces on both sides of the lens, so you can read the setting from either side of a camera – or from behind it. Depending on the production's needs, focus markings can be switched from standard to metric. The lens facilitates manual operation that's subtle, smooth, precise, and repeatable. Control rings are designed to provide and maintain the proper amount of resistance so you can operate with a consistent torque. The focus rotation angle is about 300°; for zoom, it's approximately 160°.
The CN-E 30-300mm T2.95-3.7 L S lens complements the other lens in the line in more ways than just focal length range: Their shared 136mm front diameter, gear positions, and rotation angle make them almost "hot-swappable" when they're used with a shared matte box or follow focus.
Note! Not compatible with full-frame or APS-H sensors.
Internal Focus Design
The internal geared focus design of the lens minimizes focus-induced changes, known as "breathing"
An 11-blade aperture diaphragm results in soft, cinematic blurring of out-of-focus areas
Special Glass & Construction
Designed to counteract barrel expansion and contraction, the special glass and the construction of the lens suppress temperature-induced marking discrepancies and flange-back changes
Broad Focal Length Range
The 30-300mm focal length range of the lens covers a great portion of the range most commonly used in cinema shooting
Large Aspherical Lenses
Fluorite and aspherical lens elements reduce distortion and give high optical performance
The anti-reflective coating of the lens helps reduce ghosting or flaring
Switchable Unit for Focus Marking
The outer piece on marked focus rings can be switched from metric to non-metric labeling.
Marked on Both Sides
Markings are visible from either side of the lens
Better Marking Visibility
Focus, zoom, and iris markings are printed on angled surfaces, making them easier to read from behind the camera
Unified Front Lens Diameter, Gear Position
A single front lens diameter and uniform gear positions across the line of lenses eliminate the need to move or adjust accessories when switching between lenses
Flange-Back Adjustment Mechanism
A covered flange-back mechanism is included for more accurate back-focus
Supports Standard Accessories
The lens can be used with standard accessories such as follow focus gears, marking disks, and matte boxes
Ergonomic & Efficient
Control rings offer the right amount of resistance and consistent operating torque
Light & Compact
Smaller and lighter than similar movie lenses of the same range, making them more comfortable to work with, hour after hour
This product is non-refundable.