MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: WS58

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.
Part #: KZEPPM

The K-Tek Zeppelin Wind Protector (Medium) is a simple and effective wind protector for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most shotgun microphones and...
Part #: KZEPPS

The K-Tek Zeppelin Wind Protection System with K-SSM Shock Mount (Short)is a simple and effective windscreen for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most...
Part #: KZFCL

The K-Tek Fleece Microfiber Cover for Medium Zeppelin (Long) is a simple and effective windscreen for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most shotgun m...
Availability: In Stock
$7695
QTY
Free Shipping
Part #: KFLCYL

The K-Tek Charcoal Fleece Slip On Wind Protector for Shotgun Microphones (Large) is a simple and effective windscreen for shotgun microphones. A charcoal fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and...
Availability: In Stock
$7650
QTY
Free Shipping
Part #: KFLCYM

The K-Tek Charcoal Fleece Slip On Wind Protector for Shotgun Microphones (Large) is a simple and effective windscreen for shotgun microphones. A charcoal fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and...
Availability: In Stock
$7650
QTY
Free Shipping
Part #: KFLCYS

The K-Tek Charcoal Fleece Slip On Wind Protector for Shotgun Microphones (Small) is a simple and effective windscreen for shotgun microphones. A charcoal fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and...
Availability: In Stock
$7650
QTY
Part #: KZFCM

The K-Tek Fleece Microfiber Cover for Medium Zeppelin (Medium) is a simple and effective windscreen for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most shotgun...
Availability: In Stock
$7650
QTY
Free Shipping
Part #: KZFCS

The K-Tek Fleece Microfiber Cover for Medium Zeppelin (Short) is a simple and effective windscreen for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most shotgun...
Availability: In Stock
$7650
QTY
Free Shipping
Part #: Z-FSO-L

The K-Tek Zeppelin Slip-On Windscreen (Long) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
QTY
Free Shipping
Part #: Z-FSO-M

The K-Tek Zeppelin Slip-On Windscreen (Medium) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
QTY
Free Shipping
Part #: Z-FSO-S

The K-Tek Zeppelin Fuzzy Slip-On Windscreen (Short) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek’s unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing – making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
QTY
Free Shipping
Part #: KTPRFF

The K-Tek Faux Fur Topper for Handheld Microphones (Black) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing. The system's body of open cell...
Availability: In Stock
$4050
QTY
Part #: KTDR100

The K-Tek Topper is a custom-tailored windscreen designed to reduce the effects of wind noise on the Tascam DR-100 audio recorder.
Part #: SMWSFG

The MyMyk Windshield for SmartMyk Microphone is a slip-on, open-cell, reticulated foam with an integral fur cover that provides excellent wind protection whilst safeguarding your SmartMyk in the most difficult of conditions. SmartMyk Windshield successfully reduces wind noise by up to 20dB without...
Availability: In Stock
$6600
QTY
Free Shipping
Part #: BLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
QTY
Free Shipping
Part #: WS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:...
Availability: In Stock
$5900
QTY
Free Shipping
Part #: WS7

The Rode WS7 Deluxe Wind Screen provides excellent noise protection against high wind and adverse weather conditions.

The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones; as well as any shotgun or stereo mic with a length of 7.25" (186.5mm) and...
Availability: In Stock
$5900
QTY
Free Shipping
Part #: DEADWOMBAT

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
Part #: DEADCATVMPR

The Rode Microphones DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimize wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote...
Availability: In Stock
$3900
QTY
Part #: DEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
QTY
Part #: DEADCATVMP

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.
Availability: On Backorder
$3900
QTY
Part #: DEADCATGO

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
QTY
Part #: MINIFURLAV

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: In Stock
$2499
QTY
Part #: DEADKITTEN

The Dead Kitten Windshield is designed for minimising any wind noise when using a microphone in high wind conditions.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Availability: In Stock
$2499
QTY
Part #: WS2

Rode WS2 Windscreen is built to fit NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster Microphones. Properly equip your microphone with the WS2 to avoid wind noise and pop.
Availability: In Stock
$1999
QTY
Part #: WS4

Rode WS4 Windscreen in grey is built to fit the NT4 microphone. Properly equip your microphone with the WS4 to avoid wind noise and pop. If you have a Rode NT4 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: In Stock
$1999
QTY
Part #: WS5

Rode WS5 Windscreen is built to fit the NT5 microphone. Properly equip your microphone with the WS5 to avoid wind noise and pop. The WS5 Windscreen is designed to fit If you have a Rode NT5  microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: In Stock
$1999
QTY
Part #: WS3

The Rode WS3 Windscreen provides additional protection for the microphone capsule against any wind noise or plosives.

Compatibility: If you have a Rode NT3 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Part #: WSHS1B

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of three.
Part #: WSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
QTY
Part #: WSHS1P

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of three.
Part #: WSLAV

The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent.
Part #: MZW60-1

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
Part #: MZH601

The MZH60-1 Long hair wind muff provides maximum protection against wind noise.

It is used together with the MZW 60-1
Part #: MZW66PRO

The Sennheiser MZW66PRO is a black velour windscreen for the ME66 Microphone.
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]