MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: H1200M

Heavy duty 3mm square section tubes-slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.
Part #: H600M

Heavy duty 3mm square section tubes-slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.
Part #: H660
The Avenger H660 Deluxe Fast-Loc Frame kit is lightweight and quick to set up. The square section aluminum tubes slide and lock together to provide a strong frame which supports lighting control textiles of (4' x 4' and 6' x 6' in size).
Availability: In Stock
$45688
QTY
Free Shipping
Part #: VB-1345

The LimeLite Studiolite Gel Filter Frame for SL455DMX fluorescent fixture is a lightweight frame with clips to hold filters cut to the size of fixture and it slips into the accessory channel in front of the SL455DMX.

Features:
  • Slips into Accessory Slot
  • Clips for Filters
Part #: 409712

All-Snap-A-Part Frames 8'x8' and larger, feature the "Quick Reverse Ear" which will enable the removal and reversal for uick 180deg. frame repositioning.
Part #: 409312

Matthews now offers the Snap-A-Part frames for easy handling and storage. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting truck. Snap-A-Part frames come in both light and heavy duty 1" square tubing. The Matthews Butterfly Overhead Snap-A-Part Light Duty Frame...
Part #: 409112

The Matthews 12x12 ft. Butterfly Overhead Hollywood Frame is made of 1 inch thick, hollow square tubing. This strong square tubing insures steady support for the choice of light-shaping materials. Matthews offers a wide variety of frames to hold your overheads and butterflies.

Features:
  • One
...
Part #: 409308

The Matthews Butterfly Overhead Snap-A-Part Frame (8x8 ft.) is for easy handling and storage. It features the Quick Reverse Ear which will enable the removal and reversal for quick 180 degrees frame repositioning. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting...
Part #: 409306

All Snap-A-Part Frames 8'x8' and larger, feature the "Quick Reverse Ear" which will enable the removal and reversal for quick 180deg. frame repositioning.
Part #: 409106

The Matthews 6 x 6 ft. Butterfly Overhead Hollywood Frame is made of 1 inch thick, hollow square tubing. This strong square tubing insures steady support for the choice of light-shaping materials. Matthews offers a wide variety of frames to hold your overheads and butterflies. Hollywood Frames...
Part #: B309071

Matthews now offers the Snap-A-Part frames for easy handling and storage. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting truck. Snap-A-Part frames come in both light and heavy duty 1" square tubing. The Matthews Butterfly Overhead Snap-A-Part Light Duty Frame...
Part #: 119726

These honeycomb Reflectors are 75% lighter in weight than the Standard Reflectors, measuring 40"x40" and costing considerably less. Three different Reflectors are available. The Standard Matthboard features a "hard" side and a "soft" side. In addition, the Silver Fill Matthboard offers a "super...
Part #: 119728

These honeycomb reflectors are 75% lighter in weight than the standard reflectors, measure 40" x 40", and cost considerably less. The Silver Fill Matthboard offers a "super soft" side and an "ultra soft" side. The "super soft" is made only with Matthews' material.
Part #: 549120

The flat edges of the Matthews 48x48 In. Diffusion Frame (Knife Blade) make it ideal for quick gel changes with 2 sided tapes. It does not require removing the frame for replacing the gel.

Features:
  • Easy and quick removal of gel
  • Flat edges for sticking double sided tape
Availability: On Backorder
$8500
QTY
Part #: 409100-3

The Matthews Frame Part Quick Reverse Ear for 1 In. Square Tube is the strongest, most versatile way of suspending an overhead frame. The ears are guaranteed to provide a fast and efficient way to flip the frame allowing two rags to be tied off to the frame, one on either side. Flip from bounce...
Part #: 549099

The Matthews Diffusion Frame - 36 x 36" - 3/4" Square Tubing has flat edges which make them ideal for quick gel changes with 2 sided tape.
Availability: In Stock
$7895
QTY
Free Shipping
Part #: 549121

The flat edges of these frames make them ideal for quick gel changes with 2 sided tape.
Availability: In Stock
$7225
QTY
Part #: 539189

To keep weight to a minimum and yet get maximum strength, the Matthews 48x48 In. Flag Frame is made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize reflections. All Matthews Scrims & Flags are bordered with heavy duty color coded...
Part #: 319640

The Matthews Corner Frame Part for 1-1/4 In. Pipe is a 90 degrees bent corner for joining the frame pipes. The corner has two studs for secure joint with holes and a hook to easily handle the accessory. It is highly useful to create your own Overhead Frame on the go.
Part #: 319651

Matthews offers a wide variety of Corners, Connectors, Ears, and Pins to create your own Overhead Frame on the go. As part of the design, the Matthews Ear for 1.25 In. Pipe fits over all for 1-1/4" Pipe. Use a Large Grip Head to secure it to a Jr. Combo Stand. It is gusseted for maximum strength....
Part #: 539284

The Matthews Flag Frame - 24x36 In. is wonderful and good quality frame by Matthews. Mathews have large variety of products available in market. Mathews newly designed 90° Flag frames with mounting pins attached, will make it possible to position the instrument over the top of the set wall or...
Part #: LP-SWVLHRDWR

The new Litepanel Frame Hardware Kit allows you to place a LitePanel wherever you wish with added security and functionality to the LitePanel. A unique modular design facilitates a variety of clamping options giving you unlimited freedom to reproduce your vision. Ideally suited to work with the...
Availability: In Stock
$7195
QTY
Free Shipping
Part #: LPA39CB

The Photoflex Crossbar improves the stability of your Litepanel frame. This easy clip-on accessory prevents the frame from bowing, which can occur when the frame is used above the subject, or tilted at an angle.
Part #: YFPFCB25
Availability: In Stock
$2499
QTY
Part #: PH86305

The Phottix Reflector Holder K for Circular Reflectors is for circular reflectors, with ball head and light stand mount. The Reflector Holder K mounts onto the top of any light stand with a top section diameter of 1.25 to 1.9cm (0.5 to 0.75 inches), providing a secure yet adjustable support arm...
Availability: On Backorder
$4795
QTY
Part #: RS5055

Adjusts from 6 inches up to 68 inches, this reflector holder is very easy and convenient to use. The holder attaches to a standard light stand, and features a double ball joint controlled by a single handle. May be adjusted to any angle. The reflector arm adjust to fit the size of the reflector,...
Availability: In Stock
$6995
QTY
Free Shipping
Part #: RS2003

This heavy duty 3-section one piece crossbar features twist locks to allow continuous adjustment from 4 feet to 10 feet. Just turn the section counterclockwise to release, extend to the length desired and then turn clockwise to lock in place. Features locking screws for a secure fit to user's...
Availability: On Backorder
$3695
QTY