MAIL ORDER 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: DEADCATGO

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: On Backorder
$2995
QTY
Part #: QSM1

The Que Audio QSM1 Shockmount for Mini Shot Gun Microphone mounts a Que Audio miniature, pencil-shotgun microphone.
Availability: On Backorder
$2999
QTY
Part #: DEADCATVMP

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.
Availability: On Backorder
$3900
QTY
Part #: DT414

The JuicedLink 4-Channel DSLR Camera Microphone Preamplifier is used to add high quality audio to a DSLR camera for professional video applications. It features 2 XLR microphone inputs, a stereo 1/8 inch (3.5mm) input may be used as an unbalanced microphone input, or camera audio input for playback...
Availability: On Backorder
$31900
QTY
Free Shipping
Part #: CCMINI

The Lectrosonics Zippered Carrying Case for Compact Wireless Microphone Systems is a vinyl case made to carry compact wireless microphone systems. It has 2 Interior compartments. The bag is made of high quality material for long life and can accommodate the wireless microphone system for trans...
Availability: On Backorder
$2150
QTY
Part #: DEADWOMBAT

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
Part #: SKP100G3

The Sennheiser SKP 100 G3 Plug-on Transmitter for Dynamic Microphones (516 - 558MHz) easily plugs onto microphones with XLR connections transforming them into world-class wireless units when combined with EM 100 G3 or EK 100 G3 receivers. This compact and lightweight transmitter has a run-time...
Part #: ICICLE

The Icicle is Blue's stylish USB converter and mic preamp combo that allows you to connect any XLR microphone directly into your computer via USB! The Icicle features a studio quality microphone preamp, 48V phantom power, fully balanced low noise front end, analog gain control, and driverless...
Part #: 173B

This Manfrotto Mini-Boom Arm it has a 20mm diameter, is manufactured of aluminum and features a black finish. It has a length just under 43". It is also lightweight at only .71 lbs.

Features:
  • Diameter: 20mm 
  • color: black color
  • length: 42.91 in
  • material: aluminum 
...
Part #: MCC2

The BeachTek 2-Channel Audio Adapter and Bracket is a two-channel, audio adapter / bracket combo that lets you mount, connect and control two audio devices for camcorders or DSLR cameras. This adapter is designed to easily attach wireless mics and small, self powered, camera mounted microphones...
Part #: A182

The Sennheiser A181 is a replacement antenna for Evolution series wireless body-pack transmitters and receivers. This antenna is compatible with components assigned to frequency group "B".
$1295
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Part #: WSHS1B

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of three.
Part #: SM6

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
Part #: WS58

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.
Part #: MD3000

The light and sound bracket mounts on the camera's accessory shoe to provide extra mounting points for a light, microphone, or monitor. Made of solid, extruded aluminum this bracket is a handy and ultra-compact accessory.
Part #: MZS201

The suspension is designed for outdoor use with optional basket windshields and hairy covers. Supplied with 'pistol' grip and stand mount which both have 3/8' female thread insert. Suspension is by rubber 'O' rings with spare rings supplied. Friction 'cam' locks for securing basket windshield,...
Part #: EA86

This shockmount hotshoe assembly mount is for use with a mic shaft ø 19-25 mm.
Part #: MZS6

The Sennheiser MZS6 is a Shockmount stand adapter for K6 series power modules.
Part #: ZH100

The Sennheiser ZH100 is a Lavalier "Vampire Clip" (Black).
Part #: MZH601

The MZH60-1 Long hair wind muff provides maximum protection against wind noise.

It is used together with the MZW 60-1
Part #: MZW2A

The MZW-2 Steel Mesh Grill is for the MKE platinum and MKE-2 Microphones.
Part #: MZW66PRO

The Sennheiser MZW66PRO is a black velour windscreen for the ME66 Microphone.
Part #: AT8539

The Audio-Technica AT8539 is the phantom power supply for the AT892 miniature headworn microphone. The power supply features a standard 3-pin XLR output for direct connection to standard microphone inputs.
Part #: 145101

Converts 3.5mm plug to 2.5mm plug. This adapter is necessary when purchasing headsets for use with Olympus Pearlcorder Microcassette Recorders.

Note: This adapter is not necessary for the Olympus Transcribers
Part #: WSHS1P

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of three.
Part #: WSLAV

The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent.
Part #: KTDR100

The K-Tek Topper is a custom-tailored windscreen designed to reduce the effects of wind noise on the Tascam DR-100 audio recorder.
Part #: AT8410A

The Audio-Technica Shock Mount - Spring Loaded fits with Audio-Technica Case Style(s): S1, S2, S3, S4, S7, S8, S9, S10, S11, SG1, SG2, SG3, SG4, T1, T2, T3, T4, T5, T6, T7

Features:
  • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
  • Spring-clip fits most
...
Part #: WS3

The Rode WS3 Windscreen provides additional protection for the microphone capsule against any wind noise or plosives.

Compatibility: If you have a Rode NT3 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Part #: DSLRML
Sescom DSLR-ML Mini-Link Line to Mic Level Interface
Connect it all to your DSLR camera with the multi-function DSLR Mini Link from Sescom. Designed for the DSLR professional, the DSLR-ML is the perfect interface solution to different voice recorders, dynamic camera set ups and cabling requirements....
Part #: A89M-SH

The Shure A89M-SH Shoe Mount for Microphones is developed by Shure with Rycote, shoe mount works with VP89S and VP89M End-Address Shotgun Condenser Microphones.

Patented Lyre technology provides excellent isolation against handling noise. A soft feel grip is molded into the clip to prevent the...
Part #: A89M-PG

The Shure A89M-PG Pistol Grip Mount for Microphone is developed by Shure with Rycote, adjustable handheld mount works with VP89S and VP89M End-Address Shotgun Condenser Microphones.

Patented Lyre technology provides excellent isolation against handling noise. A soft feel grip is molded into the...
Part #: MZW60-1

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
Part #: BLX1288/CVL-H8

The ideal entry-level wireless microphone system for small venues, BLX offer professional quality sound with simple setup and an intuitive interface.

The Shure BLX1288/CVL Dual-Channel Combo Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio...
$54900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: 520493
The Sennheiser Bodypack Wire Belt Clip is a replacement for the Sennheiser Bodypack Receiver and Transmitter. The clip is made of high quality material and gives firm grip to hold the body pack.
Part #: AT8691

The Audio-Technica Camera Shoe Dual Mount for ATW-R1700 Digital Wireless Receiver makes it easy to mount two ATW-R1700 System 10 digital wireless receivers to a camera's hot shoe, or to a tripod or other device with a ¼" screw. Comes with 280 mm (11.0") AT8351 dual mono to stereo coiled cable (dual...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]