MAIL ORDER 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
QTY
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
QTY
Free Shipping
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
QTY
Free Shipping
MFR Part #: INVISILAV3PK
Samy's Part #: S-030628

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
QTY
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: On Backorder
$2995
QTY
MFR Part #: MINIBOOMPOLE
Samy's Part #: RODMMINIBOOM

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.

  • lightweight aluminium con

...
Availability: In Stock
$12900
QTY
Free Shipping
MFR Part #: SM3-R
Samy's Part #: S-048321

The Rode Microphones SM3-R Camera Shoe Shockmount is a suspension shock mount with camera shoe adaptor for mounting various RØDE microphones onto a camera via the standard hot/cold shoe mount.

The SM3-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations,...
Availability: In Stock
$4995
QTY
Free Shipping
MFR Part #: DEADCATVMP
Samy's Part #: S-012745

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.
Availability: On Backorder
$3900
QTY
MFR Part #: SM4-R
Samy's Part #: S-048961

The Rode Microphones SM4-R Suspension Shockmount is a perfect suspension shock mount for mounting various RØDE microphones onto a mic stand or boompole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible...
Availability: In Stock
$4900
QTY
Free Shipping
MFR Part #: MICON3
Samy's Part #: S-014709

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to the following Shure receivers: UR1, UR1M, ULX1, SLX1, PGX1, PG1.
Availability: In Stock
$2300
QTY
MFR Part #: AMCCC301
Samy's Part #: S-021659

The GoPro 3.5mm Mic Adapter lets you connect any external 3.5mm microphone to your HERO 3 camera.

Compatibilty: GoPro HERO 3 cameras only
Availability: In Stock
$1999
QTY
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
QTY
Free Shipping
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
QTY
Free Shipping
MFR Part #: KE110CCR
Samy's Part #: KTEKKE110CCR

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
QTY
Free Shipping
MFR Part #: 037303
Samy's Part #: RYCO037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: In Stock
$2795
QTY
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
QTY
Free Shipping
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$3199
QTY
MFR Part #: KSM
Samy's Part #: KTEKKSM

The K-Tek Microphone Adjustable Shock Mount for Boompoles is the workhorse for ENG crews worldwide. A tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSM. With a machined aluminum frame, the microphone is actually held firmly in...
Availability: In Stock
$12350
QTY
Free Shipping
MFR Part #: 1033
Samy's Part #: S-031772

The Calrad Collapsible Microphone 3 Leg Stand is polished chrome plated or black finish stem with 3/8 inches - 16 thread connector and a detachable 5/8" - 27 screw adapter for microphone holder. 3 leg base with fold able tubular legs. Boom sets accessories included with stand for greater adjustment...
Availability: In Stock
$5999
QTY
Free Shipping
MFR Part #: MICON6
Samy's Part #: S-014712

The Rode MiCon 6 Connector is an adapter intended to connect the Rode HS1 headset, PinMic and lavalier microphones to AKG wireless bodypack transmitters. The MiCon 6 features a mini 3-pin female connector that is compatible with the AKG PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000 bodypacks.
Availability: In Stock
$2300
QTY
MFR Part #: KE79CCR
Samy's Part #: S-031220

The K-Tek KE79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled) has a collapsed length of 1'8″/51cm and an extended length of 6'7″/201cm and only weighs 1.45lbs/658g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
QTY
Notice: This item is non-returnable
Free Shipping
MFR Part #: KMT
Samy's Part #: S-024219

The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Availability: In Stock
$7600
QTY
Free Shipping
MFR Part #: 3013
Samy's Part #: S-021087

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: In Stock
$4945
QTY
Free Shipping
MFR Part #: PSCSHOCKMOUNT
Samy's Part #: PSCPFPSC0035D

Designed to provide stable and noise free handling for a wide variety of microphones. These shock mounts feature a compact, concise design. They are constructed of lightweight aircraft aluminum and have a non-reflective black anodize finish. The two suspension bands are custom made to our own...
Availability: In Stock
$7995
QTY
Free Shipping
MFR Part #: WSVM
Samy's Part #: RODMWSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
QTY
MFR Part #: WS6
Samy's Part #: RODMWS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:...
Availability: In Stock
$5900
QTY
Free Shipping
MFR Part #: MICON2
Samy's Part #: S-014708

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.
The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.
Availability: In Stock
$1800
QTY
MFR Part #: AT831125
Samy's Part #: AUDIAT831125

The Audio-Technica 1/4 In. T/S Male to 3-pin XLR Female Microphone 25 ft. Cables are engineered to deliver outstanding value and reliable, durable performance. An economical introduction to Audio-Technica cable quality.

Features:
  • Copper outer shield and dual conductive PVC inner shields protect
...
Availability: In Stock
$979
QTY
MFR Part #: 30524
Samy's Part #: S-029341

The Calrad XLR 3 pin Male to Male Coupler is a male 3-pin XLR to male 3-pin XLR adapter for joining two 3-pin XLR sockets. It is made of highly reliable material for best coupling and long life.
Availability: In Stock
$542
QTY
MFR Part #: SMIS0030H
Samy's Part #: PSCPSMIS0030H

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
QTY
MFR Part #: WMS-PRO + I
Samy's Part #: S-034183

Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhone®...
Availability: In Stock
$18500
QTY
Free Shipping
MFR Part #: MICON5
Samy's Part #: S-014711

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.
Availability: In Stock
$2700
QTY
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
QTY
Free Shipping
MFR Part #: KE79CC
Samy's Part #: KTEKKE79CC

This K-Tek Traveler Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 1.8 feet (51cm) and an extended length of 6.7 feet (201cm) with only weight of 1.452 lbs (659g). This 6-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread...
Availability: In Stock
$23275
QTY
Free Shipping
MFR Part #: KHG
Samy's Part #: KTEKKHG

The K-Tek Foam Lined Hand Grip with Boom Pole Head (6 In.) is a deluxe Pistol Grip for use with Shockmounts offering a boompole head and 3/8" threading for attachment. The foam covered graphite design offers both minimal weight and maximize handling isolation with considerable noise reduction....
Availability: In Stock
$3800
QTY
MFR Part #: KE110CC
Samy's Part #: KTEKKE110CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.723 lbs ( 781g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ - 16 male...
Availability: In Stock
$23750
QTY
Free Shipping
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]