MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: D650

Boom arms allow you to position your lights in the most difficult positions. Strong steel counterweighted for smoothness of operation and stability.
Part #: D600CB

Mini boom black chromed. Min extension 117cm-Max load 30kg. Max extension 212cm-Max load 7kg. 16mm female stand attachment.
Availability: In Stock
$12088
QTY
Part #: D600

Boom arms provide an unobstrusive method of positioning lighting fixtures and reflectors above a subject. Supports 66 lbs at the minimum extension of 46 in. Supports 15.4 lbs at the maximum extension of 83 in.
Availability: In Stock
$12088
QTY
Part #: 3800

The Chimera Standard Light Boom is used to quickly and easily position overhead lights with softboxes. It operates like a small jib arm thus providing 72 inches of reach with 360 degrees rotating head extension for angular adjustment. Special single handle is attached on the head extension to...
Availability: On Backorder
$61000
QTY
Part #: 3810

The Chimera Compact Light Boom is used to quickly and easily position overhead lights with softboxes. It operates like a small jib arm thus providing 32 inches of reach with 360 degrees rotating head extension for angular adjustment. Special single handle is attached on the head extension to control...
Availability: On Backorder
$48500
QTY
Free Shipping
Part #: DL-0392P

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3995
QTY
Part #: DL0390P

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3495
QTY
Part #: KG601612

A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an "ear" that is d...
Availability: In Stock
$9450
QTY
Part #: KG602512

The Kupo Baby Drop Down Pin is a male to female 5/8” baby pin adapter with variable angle adjustment used to attach an Avenger F800 3-Inch Baby Wall Plate for mounting a video light. The pivoting pin allows a light with a reflector or softbox to maintain a horizontal position regardless of the...
Availability: In Stock
$2625
QTY
Part #: 425B

Largest boom in the range, remote control of pan, tilt and rotation of laminar plus geared telescopic extension. Combination of black zinc steel and black anodized aluminum tubes.
Availability: In Stock
$98688
QTY
Part #: 025TM

This Manfrotto 025TM 5.5 ft. Mini Super Boom with Column Stand (Black) has crank handles for swing and tilt of your mounted Baby fixture. It extends to a maximum of 5.5' (1.7 m) and has an adjustable 15 lb (6.8kg) counterweight. The Wheeled Stand Base is suitable for mounting light or heavy-weighted...
Availability: In Stock
$52988
QTY
Part #: 420B

A light stand and a boom, all in one!!! The Boom Stand is a 3 riser compact stand that can be rapidly converted into a stand with boom arm. The pivoting collar on the stand allows the top two extensions to be tilted for use as a telescopic boom arm. Supplied with a refillable counterweight for maximum stability....
Availability: On Backorder
$19288
QTY
Part #: 098SHB

This Manfrotto Short Wall Boom arm attaches to a wall. It has a black finish, and includes a double ended stud for mounting a fixture.

Replaces item # 098SH
Part #: B377701

MINI MAX is the smaller compact version of Matthews' very successful and very popular MAX. Like its larger counterpart MINI MAX allows you to place a fixture in places where no other lighting support system may go. When the POV will not accommodate a stand or fixture placement MINI MAX can "fly"...
Part #: 427803

The largest and heaviest duty Matthews Junior Boom (5.6-10 ft.) measures 68 inches (172cm) when fully collapsed and will extend to over 10 feet (300cm). The Junior Boom has a 25-pound (12kg) counter-balance weight attached and features the same tilt-locking and mounting mechanism found on the...
Availability: On Backorder
$35870
QTY
Free Shipping
Part #: 427801

Similar in construction to the Mini Boom this boom utilizes a much heavier duty tilt locking device and can be mounted on a stand with either a Junior Receiver or a Baby Pin.
Availability: In Stock
$23885
QTY
Free Shipping
Part #: 427802

The Matthews Mini Boom is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a sandbag...
Availability: On Backorder
$17000
QTY
Part #: B427802

Designed because of the growing demand for a boom which would not bend when an array of accessories are added to small lighting fixtures or strobes such as light banks egg crates etc. Made completely out of steel the Mini Boom mounts on a 5/8" Baby Pin and will extend 7 feet terminating in a 5/8"...
Availability: In Stock
$17000
QTY
Free Shipping
Part #: 540001

Totally redesigned to be the only Articulated Arm to lock firmly enough to be able to hold a small light fixture securely. The serrated ball joints and the redesigned end receiver are all part of MSE Magic. The end receiver is a 5/8" Baby Pin on the outside and will accept the standard Dot Finger...
Availability: In Stock
$10540
QTY
Free Shipping
Part #: ACLTREACHPLS

When there is no time to hassle with a LiteStand or you need your reflector or light where no LiteStand can go; grab your LiteReach Plus. The extra-long LiteReach Plus allows your assistant to place your softbox, umbrella or LitePanel wherever you need it. Photoflex Extension Pole for Litepanel...
Availability: In Stock
$15695
QTY
Free Shipping
Part #: LSBBOOM

The 3 section boom extends lights or props up to 5 feet away from your stand. It is strong enough to hang a small size softbox over head for a main or hairlight. The flexible boom adjusts from 5' to 7' by using either two or three sections. Taking this boom on location is a breeze with easy tr...
Availability: In Stock
$13995
QTY
Part #: RS3115

Features a 3-section, 6 ft. telescopic boom arm with a 4.5 lb counter weight, and a 4-section 90" pneumatic boom stand. The lamp head features a focusing ceramic socket that is rated to 660 watts and features a 12' UL/CSA power cord with inline on/off switch. The 6 inch narrow angle reflector...
Part #: RS1130

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
QTY
Free Shipping
Part #: RS3102

The heavy duty LightBar is designed to accept up to 4 speedlites and, if desired, wireless releases, LED lights or quartz lights. It features metal construction with a tilting umbrella holder. The umbrella holder has a saw-tooth design for the tilt feature assuring a secure positioning of the...
Availability: In Stock
$5195
QTY
Part #: RS3110

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: On Backorder
$3795
QTY
Part #: RS3135

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]