MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: FASOBO

7lbs Counterweight for ASABA Camera Stand. Fits inside the column of the Foba ASABA Camera Stand. Makes height adjustment of larger cameras easier.
Availability: In Stock
$15680
QTY
Free Shipping
Part #: RS1130

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
QTY
Free Shipping
Part #: 035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2988
QTY
Part #: 756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
$15895
QTY
Free Shipping
Part #: C720000

The California Sunbounce Sand Bag for 15 Kg (Empty) can be used to stabilize light stands--it can hold up to 15 kg (33 lbs) of sand or other weighted material. When used with the Sand Bag Adapter, up to three sand bags can be easily and securely placed on a single light stand for complete st...
Availability: In Stock
$5880
QTY
Free Shipping
Part #: 350602-11

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$800
QTY
Part #: 350602-8

The Matthews MICROgrip Rod (12 In.) are used to create a highly flexible mount that will allow the photographer to get the on-camera light up from the camera body with ease and adjustability. The creative photographer adds rods to create dramatic and creative lighting effects with the on-camera...
Availability: In Stock
$1300
QTY
Part #: 350634

This small, compact Matthews Dove Tail Camera Mount has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your Noga Arm by Matthews. The mount holds your camera with firm stability and features with quick release system to add or remove your...
Availability: On Backorder
$4299
QTY
Part #: 100P

The Westcott Photo Basics "Just Add Lights" Bundle includes a 10'x10' white background, a 45" silver umbrella, 43" white umbrella, a 6.5' light stands and a lightweight black light stand.

 Photo Basics "Just Add Lights" Bundle, it contains everything you'll need for portraiture or group pho

...
Availability: In Stock
$7999
QTY
Part #: B427080

The Matthews Maxi Matthpole Black (8-14.9 ft.) is stronger and more durable than any similar product. Unique "expanding casting" provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and...
Availability: On Backorder
$14875
QTY
Free Shipping
Part #: A2033FCBKIT

Avenger black 40" century stand folding base and kit. This kit includes a 2.5" swivel grip and a 40" grip arm. A favorite among professional photographers, film makers and videographers everywhere. It is durable and designed to collapse flat for easy transport and storage. The leg design provides...
Availability: In Stock
$19588
QTY
Free Shipping
Part #: RS3110

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
QTY
Part #: 427802

The Matthews Mini Boom is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a sandbag...
Availability: In Stock
$17000
QTY
Free Shipping
Part #: KS704312

Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting e...
Part #: 1051BAC

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Part #: C1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: In Stock
$815
QTY
Part #: 339574

The Matthews 20 In.Century C Stand With Spring Loaded Base is a important component in the image maker's arsenal of tools. The Matthews 20" Century Double Riser stand assists the motion picture, television, and photographic professional in lighting. This 20" C stand features a spring loaded base,...
Part #: B756120

Matthews C-Stand with Turtle Base, includes Grip Head and Arm, non-spring loaded base.
Availability: In Stock
$19550
QTY
Free Shipping
Part #: 387402

Designed primarily for use in lighting kits, this stand is compact and light weight. It is ideal for assembling custom lighting kits or as a replacement. This black finish aluminum stand has 3 riser sections. Many Matthews Revenger Stands employ a " Brake Shoe " system for locking off the riser tubes as...
Availability: In Stock
$6715
QTY
Free Shipping
Part #: 350626

The Matthews 10.5 In. Superflex NOGA Articulating Arm is 10.5 inch (26.6cm) long at full extension and will support a weight of 13.2lbs (6kg) at full extension. It is articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering many more features and...
Availability: In Stock
$14450
QTY
Free Shipping
Part #: KG701611

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
$2550
QTY
Part #: RS1058

A lite weight stand for small strobes and light weight lampheads. Ideal for speedlites, photofloods, and smaller monolites.
Availability: In Stock
$1995
QTY
Part #: B756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$19550
QTY
Free Shipping
Part #: 420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: LSB-PP

The Dynalite Light Stand Bracket is used to mount Dynalite Road / RoadMax 400 or 800W/s power packs to light stand. The bracket is made of high quality material and has a 5.3 lb (2.4 kg) weight capacity.

Features:
  • Used to mount power pack to light stand
  • Made of best material
  • Holds 5.3 lbs
Availability: In Stock
$5400
QTY
Free Shipping
Part #: KS704211

The Kupo 20 In. Master C Turtle Base Kit (Black) features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking...
Part #: D700B

Positions and holds reflector for hands free use.
Availability: In Stock
$5688
QTY
Free Shipping
Part #: MLH1HS

The Manfrotto Snap Tilthead with Shoe Mount is a versatile tilt head with hot shoe attachment compatible with all branded flashguns, it also incorporates an umbrella socket. A smart counterbalance mechanism prevents the flashgun from dropping along the stand, thus assuring maximum safety to the...
Part #: 066

The Manfrotto 066 Double Female Stud is a double ended 5/8" diameter stud that has a 1/4"-20 female thread on one side, and a 3/8" female thread on the other side. Use it to extend an existing threaded stud.
Availability: In Stock
$475
QTY
Part #: 1004BAC

This 12' Aluminum Master Stand (Black) lightweight construction and compact-size of this stand make it a practical tool for your lighting support needs. With a patented Quick Stack System (QSS) you can easily stack the stands together with their built in connectors for portable transport and s...
Availability: In Stock
$11488
QTY
Free Shipping
Part #: 350602-9

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1100
QTY
Part #: 350602-7

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1500
QTY
Part #: D600CB

Mini boom black chromed. Min extension 117cm-Max load 30kg. Max extension 212cm-Max load 7kg. 16mm female stand attachment.
Availability: In Stock
$12088
QTY
Free Shipping
Part #: 429678

Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and out...
Availability: In Stock
$1530
QTY
Part #: KG000712

This Convi Clamp accessory is a super strong steel "J" hook with a hex pin. The Kupo Hex J Hook (2 Pack) is perfect for hanging strobe packs, HMI ballasts, or rigging background crossbars to light stands. They are one of the most popular accessories in the vast Convi Clamp System.
Availability: In Stock
$1220
QTY
Part #: KG100911

The Kupo Max Arm with Hand Wheel is an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds!

The two 5/8" (16mm) studs at either end are attached to ball joints that rotate 360 degrees, plus a cut-out in the sleeve surrounding the ball...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]