MAIL ORDER 800-321-4726
Light Stands & Grip Equipment
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: B756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
$15895
QTY
Free Shipping
Part #: 25LB

The Saddle Sandbag 25 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:

  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypropylene.
  • Handles on
...
Availability: In Stock
$2995
QTY
Part #: 756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: On Backorder
$15895
QTY
Free Shipping
Part #: 350626

The Matthews 10.5 In. Superflex NOGA Articulating Arm is 10.5 inch (26.6cm) long at full extension and will support a weight of 13.2lbs (6kg) at full extension. It is articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering many more features and...
Availability: In Stock
$14450
QTY
Free Shipping
Part #: RS1130

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
QTY
Free Shipping
Part #: 1004BAC

This 12' Aluminum Master Stand (Black) lightweight construction and compact-size of this stand make it a practical tool for your lighting support needs. With a patented Quick Stack System (QSS) you can easily stack the stands together with their built in connectors for portable transport and s...
Availability: In Stock
$11488
QTY
Free Shipping
Part #: KG701611

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
$2629
QTY
Part #: 756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$19550
QTY
Free Shipping
Part #: A2033FCBKIT

Avenger black 40" century stand folding base and kit. This kit includes a 2.5" swivel grip and a 40" grip arm. A favorite among professional photographers, film makers and videographers everywhere. It is durable and designed to collapse flat for easy transport and storage. The leg design provides...
Availability: In Stock
$19588
QTY
Free Shipping
Part #: 427802

The Matthews Mini Boom is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a sandbag...
Availability: In Stock
$17000
QTY
Free Shipping
Part #: 756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: On Backorder
$15895
QTY
Free Shipping
Part #: A5029

This 9 ft 10 in double riser light stand features a low profile base that slips easily into position on set. It is supplied with wheels and positive brakes.
Availability: In Stock
$25088
QTY
Free Shipping
Part #: 15LB

The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypropylene.
  • Handles on
...
Availability: In Stock
$2195
QTY
Part #: H386022

Junior & Senior Stands: Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8" Posi-V-Lock female with pop up 5/8" male receiver....
Availability: On Backorder
$32725
QTY
Free Shipping
Part #: D200

Avenger's most popular grip accessory. The D200 Grip Head has hundreds of functions. Unlike any other grip head, the D200 utilizes a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security.
Availability: In Stock
$2888
QTY
Part #: B387490

Designed primarily for use in lighting kits, this stand is compact and light weight. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. This is a triple riser stand, for reaching a maximum height...
Availability: In Stock
$16745
QTY
Free Shipping
Part #: YLS2000C

The Phototools Retractable Light Stand is an aluminum stand with four sections that lock into place via durable twist locks. The stand extends to a maximum height of 6.2' and folds down to 19". This light stand can support weight up to 3.3 pounds and when broken down, it weighs about 2 pounds
...
Availability: In Stock
$4999
QTY
Free Shipping
Part #: 427801

Similar in construction to the Mini Boom this boom utilizes a much heavier duty tilt locking device and can be mounted on a stand with either a Junior Receiver or a Baby Pin.
Availability: In Stock
$23885
QTY
Free Shipping
Part #: DS-013

The Savage Drop Stand Light Stand (13 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
Availability: In Stock
$10899
QTY
Free Shipping
Part #: RS3135

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
QTY
Part #: B756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$19550
QTY
Free Shipping
Part #: D200B

Avenger's most popular grip accessory. The D200B Grip Head has hundreds of functions. Unlike any other grip head, the D200 utilizes a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security.
Availability: In Stock
$3088
QTY
Part #: B541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength...
Availability: In Stock
$3740
QTY
Part #: H386020

The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
Availability: In Stock
$29750
QTY
Free Shipping
Part #: 350616

The Matthews Smart Phone Adapter allows you to mount smart phones to Matthews MicroGrip 3/8" rods or clamps. Using the MicroClamp, you can then affix the setup to anything with a diameter up to 1.75".
Availability: In Stock
$4895
QTY
Part #: 350605

MICRO Shot Bag used to counterbalance weight in Matthews MICROgrip line of gear.
Availability: In Stock
$1495
QTY
Part #: H377573

Roller Stands or Overhead Stands as they are often called utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios these stands feature wide bases for stability and terminate in the new 4 .5" Grip Head. Both the Hi-Hi...
Availability: In Stock
$40715
QTY
Free Shipping
Part #: 427803

The largest and heaviest duty Matthews Junior Boom (5.6-10 ft.) measures 68 inches (172cm) when fully collapsed and will extend to over 10 feet (300cm). The Junior Boom has a 25-pound (12kg) counter-balance weight attached and features the same tilt-locking and mounting mechanism found on the...
Availability: In Stock
$35870
QTY
Free Shipping
Part #: 350634

This small, compact Matthews Dove Tail Camera Mount has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your Noga Arm by Matthews. The mount holds your camera with firm stability and features with quick release system to add or remove your...
Availability: On Backorder
$4299
QTY
Part #: D600

Boom arms provide an unobstrusive method of positioning lighting fixtures and reflectors above a subject. Supports 66 lbs at the minimum extension of 46 in. Supports 15.4 lbs at the maximum extension of 83 in.
Availability: In Stock
$12088
QTY
Free Shipping
Part #: 350584
Availability: In Stock
$2380
QTY
Part #: KG601612

A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an "ear" that is d...
Availability: In Stock
$9750
QTY
Free Shipping
Part #: DRACO
6.5' Aluminum 3-Section Light Stand (Black)
Availability: In Stock
$3999
QTY
Part #: A10

The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: On Backorder
$4900
QTY
Free Shipping
Part #: 026

The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8".

FEATURES:
  • Bracket tilts
...
Availability: In Stock
$3419
QTY
Part #: 541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
$3740
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]