MAIL ORDER 800-321-4726
Light Stands & Grip Equipment
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
$15895
QTY
Free Shipping
MFR Part #: RS2000
Samy's Part #: S-003828

This portable background support features metal collars with an aluminum crossbar and uprights with a black finish to cut down on reflections. The air cushioned uprights have three sections with the diameter of 33mm for the largest section. The uprights extend from 44 inches to 120 inches (10...
Availability: In Stock
$11395
QTY
Free Shipping
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
$15895
QTY
Free Shipping
MFR Part #: 100850
Samy's Part #: S-009345

The Reflector Holder attaches directly to any Creative Light Stand (and most other brands), it holds the reflector in two positions to make sure it stays in place. And the adjustable arm ensures you can position the Reflector where needed, quickly and easily.
Availability: In Stock
$2900
QTY
MFR Part #: KS041011
Samy's Part #: S-020258

The Kupo Handy Stand is a light weight handy stand that weighs only 2.4 lb (1.1 kg) and folds down to a space saving 19.2 inches. It opens up to the height of 89.3 inches (2.27 m). It is known as handy as it can be accommodated in ordinary suitcase to carry with which makes it a natural choice...
Availability: In Stock
$5000
QTY
Free Shipping
MFR Part #: 427803
Samy's Part #: S-003199

The largest and heaviest duty Matthews Junior Boom (5.6-10 ft.) measures 68 inches (172cm) when fully collapsed and will extend to over 10 feet (300cm). The Junior Boom has a 25-pound (12kg) counter-balance weight attached and features the same tilt-locking and mounting mechanism found on the...
Availability: In Stock
$35870
QTY
Free Shipping
MFR Part #: 15LB
Samy's Part #: S-024743

The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypropylene.
  • Handles on
...
Availability: In Stock
$2195
QTY
MFR Part #: 25LBAWF
Samy's Part #: S-045682

The STUFFT Fly-A-Way Sandbag (Max 25 lbs.) is used to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Note: This bag is empty.

Features:
  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypro
...
Availability: In Stock
$3295
QTY
MFR Part #: 427802
Samy's Part #: MATT427802

The Matthews Mini Boom is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a sandbag...
Availability: In Stock
$17000
QTY
Free Shipping
MFR Part #: H377573
Samy's Part #: MATTH377573

Roller Stands or Overhead Stands as they are often called utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios these stands feature wide bases for stability and terminate in the new 4 .5" Grip Head. Both the Hi-Hi...
Availability: On Backorder
$40715
QTY
Free Shipping
MFR Part #: RS3110
Samy's Part #: S-001564

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
QTY
MFR Part #: RS1150
Samy's Part #: S-004573

General purpose counterweight can be used with any light stand or boom. Includes "Hi-Vis" yellow stripes so it is easy to see in a darkened studio, prevents accidents. Sandbag has two pockets which can be filled with sand to produce the proper counterbalance effect (sand not included.) Also...
Availability: In Stock
$1995
QTY
MFR Part #: 10LB
Samy's Part #: S-024742

The Saddle Sandbags 10 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypropylene.
  • Handles on
...
Availability: In Stock
$1995
QTY
MFR Part #: 5571
Samy's Part #: S-035326

The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: In Stock
$7990
QTY
Free Shipping
MFR Part #: 1100
Samy's Part #: WESC1100

Illuminator Arm, has a double ball-joint for exact positioning. The clip mechanism firmly grips the product frame and fits on any stand with a standard fitting.
Availability: In Stock
$7340
QTY
Free Shipping
MFR Part #: 035RL
Samy's Part #: MANF035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2988
QTY
MFR Part #: 350605
Samy's Part #: S-006326

MICRO Shot Bag used to counterbalance weight in Matthews MICROgrip line of gear.
Availability: On Backorder
$1495
QTY
MFR Part #: 299555
Samy's Part #: MATT299555

Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with...
Availability: In Stock
$3395
QTY
MFR Part #: 15LBRH
Samy's Part #: S-042844

The STUFFT Sandbag 15 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use
...
Availability: In Stock
$2295
QTY
MFR Part #: 350628
Samy's Part #: S-028880

This clever Matthews Quick Release Adapter for NOGA Arm allows you to make quick changes to your equipment without having to mess with screws and threads. In low light, tight spaces or no time to lose, pull back the red sleeve and drop your preloaded monitor, mic, light or whatever into the Quick...
Availability: In Stock
$8500
QTY
Free Shipping
MFR Part #: 3506024
Samy's Part #: S-006320

For use with MICROgrip mounts and bases, positioning lighting and scrims to create dramatic and creative lighting effects with an on-camera lighting fixture or attached to a base. Tapped with standard 3/8 in. threading.
Availability: In Stock
$865
QTY
MFR Part #: KG601612
Samy's Part #: S-015133

A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an "ear" that is d...
Availability: In Stock
$9750
QTY
Free Shipping
MFR Part #: 196AB2
Samy's Part #: MANF196AB2

Single articulated arm with two sections. Top attachment with a 16mm spigot 3/8" light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4" thread.
Availability: In Stock
$3188
QTY
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
$4990
QTY
Free Shipping
MFR Part #: DL-0392P
Samy's Part #: S-014911

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3995
QTY
MFR Part #: 350629
Samy's Part #: S-028879

This clever adapter with Matthews 1/4-20 Male Bottom & 1/4-20 Female Top for NOGA Arm allows you to make quick changes to your equipment without having to mess with screws and threads. In low light, tight spaces or no time to lose, pull back the red sleeve and drop your preloaded monitor, mic, light...
Availability: In Stock
$8499
QTY
Free Shipping
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$19550
QTY
Free Shipping
MFR Part #: SHOTBAG5
Samy's Part #: S-033995

The STUFFT 5 lb Shot Bag is made of ballistic nylon fabric shot encapsulated in inner poly bag embroidered with "shot" and weight in pounds custom embroidery. The bag is used to stabilize light stands or set walls.
Availability: In Stock
$2495
QTY
MFR Part #: YA094
Samy's Part #: S-034619

The Phototools Cold Shoe Umbrella Adapter fits onto almost any standard light stand. It has a swivel, an umbrella socket with a tightening screw and a shoe mount for mounting a flash. You can use the Cold Shoe Umbrella Adapter to aim your shoe mount flash and/or add an umbrella to create a...
Availability: On Backorder
$2999
QTY
MFR Part #: YLSC2400T
Samy's Part #: S-034603

The Phototools Light Stand with Leveling Leg is a four section light stand with a leveling leg that extends to provide secure support of lighting equipment on uneven surfaces like stairs and other terrain.

The stand extends to a maximum height of 8.2' and has a 5/8" Baby top stud.
Availability: In Stock
$7999
QTY
Free Shipping
MFR Part #: A2033LKIT
Samy's Part #: S-002028

This Avenger A2033LKIT Century Grip Arm Kit is constructed of chrome steel. The stand features one sliding leg, which allows it to adapt to uneven terrain such as stairs or hillsides. This feature provides optimum support for your light heads, reflectors or gobos. This grip kit includes a D520L 40"...
Availability: In Stock
$19588
QTY
Free Shipping
MFR Part #: KS041711
Samy's Part #: S-043586

The Kupo Midi Click Stand (8 ft.) is designed for studio or location shooting. These light stands can easily be taken on location because of the clever and unique interlocking mechanism which allows you to carry them in different configurations. Features a clever interlocking mechanism that allows...
Availability: In Stock
$7699
QTY
Free Shipping
MFR Part #: 299888
Samy's Part #: MATT299888

This versatile, stainless steel shot bag quickly wraps around the base of any stand column, brace, tee handle, arm or boom. By placing the weight directly below the weight of the fixture, the weight is actually directed straight down the stand's vertical column, holding it firmly in place. The...
Availability: On Backorder
$5780
QTY
MFR Part #: RS-1145
Samy's Part #: S-022074

The RPS Studio 6 ft. Medium Boom Stand & Arm has a 2-section adjustable boom arm, a 3-section light stand, a connecting knuckle, and a fillable sand bag with connecting ring
Availability: In Stock
$7995
QTY
Free Shipping
MFR Part #: BLS1
Samy's Part #: S-048520

The ProMediaGear Rosette Adapter for Profoto B1/B2 Off-Camera Flash Mount Stud is a light Adapter for Profoto B1 B2 Broncolor Elichrom Standard Light-stand Mount Studs. Expand your lighting options with this rock solid rosette mount. Swing your flash forward or back and have it stay there. It...
Availability: In Stock
$5995
QTY
Free Shipping
MFR Part #: YA056
Samy's Part #: S-034614

The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
$1999
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]