MAIL ORDER 800-321-4726
Clips & Shock Mounts
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: SM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
QTY
Free Shipping
Part #: K-CAM-SM

The K-Tek Camera Shoemounting Shock Mount for Shotgun Microphones is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb...
Availability: In Stock
$7600
QTY
Free Shipping
Part #: INVISILAV10PK

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$4000
QTY
Part #: CLIP1

The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user.
Availability: In Stock
$1995
QTY
Part #: SMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
QTY
Part #: VAMPIRECLIP

The Rode Vampire Clip is a double-toothed clothing pin that conveniently fastens the R
Availability: In Stock
$1099
QTY
Part #: 1097BK

The Calrad Lavalier Clasp-type Microphone Holder is a Tie Clip microphone holder that fits 7/32 inches diameter microphones.

Lavalier Clasp-type Microphone Holders are used for hand free performance.
Availability: In Stock
$599
QTY
Part #: 3013

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: On Backorder
$4945
QTY
Free Shipping
Part #: INVISILAV3PK

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
QTY
Part #: 037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: In Stock
$2795
QTY
Part #: 1097

The Calrad Lavalier Clasp-type Microphone Holder is a microphone clip holder (Tie Clip) that fits 7/32 inches diameter microphones. Lavalier Clasp-type Microphone Holder is used for hand free performance.
Availability: In Stock
$599
QTY
Part #: PSCSHOCKMOUNT

Designed to provide stable and noise free handling for a wide variety of microphones. These shock mounts feature a compact, concise design. They are constructed of lightweight aircraft aluminum and have a non-reflective black anodize finish. The two suspension bands are custom made to our own...
Availability: In Stock
$7995
QTY
Free Shipping
Part #: AT8415

Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts Lightweight, low-profile design is ideal for "fishpole" booms and video use Equally adapted to cylindrical and tapered microphones Features a constant-tension clutch and 360 degree rotation Compatible with 3/8"-16...
Availability: In Stock
$5900
QTY
Free Shipping
Part #: MZQ2EW

The Sennheiser MZQ2-ew is a clip for an ME2 Lavalier Microphone.
Availability: In Stock
$795
QTY
Part #: MZQ800

The Sennheiser MZQ800 is a Universal Evolution handheld microphone clip.
Availability: In Stock
$1395
QTY
Part #: PG2

The Rode PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.

It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy ad...
Availability: In Stock
$7900
QTY
Free Shipping
Part #: SMIS0030H

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
QTY
Part #: QSM1

The Que Audio QSM1 Shockmount for Mini Shot Gun Microphone mounts a Que Audio miniature, pencil-shotgun microphone.
Availability: On Backorder
$2999
QTY
Part #: LAVCLIP

The LAV-CLIP is an ergonomic and discreet clip mount for the Rode Lavalier microphone.
Availability: In Stock
$2499
QTY
Part #: KCAMSSM

The K-Tek Camera Shoemounting Shock Mount for Sanken CS-1 is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb vibration...
Availability: In Stock
$7600
QTY
Free Shipping
Part #: KEUS

The K-Tek Universal Suspension Mount with Two Polymer Suspenders is a universal suspension mount for shotgun and similarly sized microphones. It utilizes two Polymer Suspenders for maximum protection against noise due to handling and shock. The suspension mount is lightweight and intended for...
Availability: In Stock
$5400
QTY
Free Shipping
Part #: KSM

The K-Tek Microphone Adjustable Shock Mount for Boompoles is the workhorse for ENG crews worldwide. A tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSM. With a machined aluminum frame, the microphone is actually held firmly in...
Availability: In Stock
$12350
QTY
Free Shipping
Part #: KSSM

The K-Tek Short Microphone Shock Mount is the shorter alternative to the KSM. Every bit as much of a workhorse for ENG crews as the larger KSM, the tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSSM. With a machined aluminum frame,...
Availability: In Stock
$12350
QTY
Free Shipping
Part #: KSUS

The K-Tek Polymer Microphone Suspenders for Shockmounts (Pair) is a rugged replacement accessory pair of polymer Microphone suspenders, featuring a 4 point design that provides optimal shock and motion isolation, for use with Shockmounts. The K-SUS Suspenders are spaced 2″ (5cm) equipped with...
Availability: In Stock
$1900
QTY
Part #: 3068

Already own one of the Dinkum Systems CINE or PRO lens shades? Make your device do double duty with a Dinkum Systems ActionPod Top 3/8-16 in. Threaded Stud simply pop the metal flag off the end of your shade, add the top and gain an extra camera or mic mount. Own one of the Pro Pack kits? Throw this extra...
Availability: In Stock
$1345
QTY
Part #: KMT

The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Availability: In Stock
$7600
QTY
Free Shipping
Part #: AT8691

The Audio-Technica Camera Shoe Dual Mount for ATW-R1700 Digital Wireless Receiver makes it easy to mount two ATW-R1700 System 10 digital wireless receivers to a camera's hot shoe, or to a tripod or other device with a ¼" screw. Comes with 280 mm (11.0") AT8351 dual mono to stereo coiled cable (dual...
Part #: SM6

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
Part #: MZS201

The suspension is designed for outdoor use with optional basket windshields and hairy covers. Supplied with 'pistol' grip and stand mount which both have 3/8' female thread insert. Suspension is by rubber 'O' rings with spare rings supplied. Friction 'cam' locks for securing basket windshield,...
Part #: EA86

This shockmount hotshoe assembly mount is for use with a mic shaft ø 19-25 mm.
Part #: MZS6

The Sennheiser MZS6 is a Shockmount stand adapter for K6 series power modules.
Part #: ZH100

The Sennheiser ZH100 is a Lavalier "Vampire Clip" (Black).
Part #: 037701

This Rycote Hot Shoe Extension/Extender (20 cm) lets you fit more than one hot attachment onto your equipment.
Availability: In Stock
$5995
QTY
Free Shipping
Part #: KBRGS

A 4" machined aluminum shoe bridge that sits 4" over the camera and can offset accessories to one side. The cold shoe is made of industrial Delrin.
Availability: In Stock
$4560
QTY
Part #: 520493
The Sennheiser Bodypack Wire Belt Clip is a replacement for the Sennheiser Bodypack Receiver and Transmitter. The clip is made of high quality material and gives firm grip to hold the body pack.
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]