MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: RS8518

These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: In Stock
$999
QTY
Part #: RSRT03R4C

The RPS Studio Wireless 4 Ch Hot Shoe Receiver is an extra receiver for use with the RS-RT03 Series wireless flash triggers. Includes the adapters for 1/4"mono plug as well as 3.5 mm mini plug. Please note this unit is designed for the 4 channel trigger and cannot be used with single channel...
Availability: On Backorder
$2995
QTY
Part #: HA6943P

A PC (Post Connection) Cord connects a camera to a flash head, or monolight, enabling the flash to fire at the instant the shutter button is pressed. Many cameras do not have a PC terminal to connect this cord. If so, an additional Hot Shoe Adapter must be used, to provide the necessary terminal.
Part #: 0315X

The Dyna-lite 15 ft. Heavy Duty Sync Cord is designed to connect, and allow triggering of Dynalite Power Packs from a camera. The power cord has standard AC plug on one end and PC connector on the other end.
Part #: 103010

Profoto Sync Cable for the D1 Monolight is a 16' (5 m) mini-plug (1/8 / 3.5 mm) to camera PC cord
Availability: In Stock
$2100
QTY
Part #: 102507

The Profoto 16' Profoto Pro Power cable for use in USA for the Profoto Pro 6, & 7 power packs. AC power cable with grounded USA plug The lenght is 16 ft (5m). This is a spare or replacement for the one that ships with the unit. The 16.4' cable is female NEMA on one end and has a plug for use in...
Part #: FV120CORD

The Starlite QL Power Cord (120v) fits the domestic model Starlite QL continuous light head. This product comes with each Starlite QL light head.

designed with heavy duty switch casing. 20A industrial grade, oversized, back-lit rocker switch. High-impact molded cover with sidewalls for optimum...
Part #: RS8512

These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: On Backorder
$999
QTY
Part #: W990560

Safe Syncs Safely reduces any electronic flash source from up to 400 volts to less than 6 volts to the camera sync input. This is absolutely mandatory for all high end and digital cameras. Hot Shoe to Hot Shoe Safe Sync that also features professional heavy duty threaded PC high voltage input...
Availability: In Stock
$4995
QTY
Free Shipping
Part #: 102502

A 16.4' (5M) AC power cord , ungrounded, designed to be used in Japanese 100V power outlets. Designed to fit the Profoto Acute Power Pack and Compact Monolight.

Features:
  • Power Cable for Japan 100V outlets
  • 16' (5m)
  • Ungrounded
Availability: In Stock
$3900
QTY
Part #: QF43

Extends power cable for model QFX/QFX2 - 16' (5m) long.
Part #: QT49

Extension Cord for Turbo Cables, 10ft. (3m.)
Part #: 0418
Dyna-Lite 18' Extension Cable for Dyna-Lite Flash Heads
This 18' Head Extension Cable is for use with current heads and power packs. It lenghtens the distance between your pack and head by 18' (5.4 m). Other lengths are available.
Availability: In Stock
$14995
QTY
Free Shipping
Part #: 13560

Speedotron 20' Straight Sync Extension Cord, Household (AC) Male to Household (AC) Female.
Part #: 919670

The Photogenic Powerlight Trip Cord is a 15' sync cord for Photogenic or other brand lighting equipment with a standard 1/4” connector. Standard PC tip on other end.
Part #: 103001

Flashes can be triggered in several ways: via a synchro-cable connected to the camera, by a built-in photocell triggered by the flash from another unit, or by being interconnected to another flash via a Synchro Interconnection Cable. This cable must be used when "daisy-chaining" or wiring together...
Part #: DL0433P

This is Dotline 15ft PC/AC Straight Sync Cord for Power Packs. 
Availability: In Stock
$795
QTY
Part #: 0203

This is a Dynalite AC Power Cord. It is 10 ft. long, grounded for use with 110-120VAC current. It fits all Dynalite power packs and monolights.
Availability: In Stock
$1500
QTY
Part #: 13200

This is a replacement 20' detatchable head cable, which is included with the purchase of a 202VF flash head.
Part #: 330601

This head extension cable will extend the length of the original Acute flash head cable by 16.4' (5M).
Availability: In Stock
$28800
QTY
Free Shipping
Part #: 102509

This Profoto Power Cable for Acute (North America) is a 16.4 feet Acute power source with female NEMA on one end and has a plug for use in North America on the other end.
Availability: In Stock
$5500
QTY
Free Shipping
$37200
QTY
Free Shipping
Part #: 303519

32' Head extension cable Extension that works on both Pro-7A and Pro-7B packs and heads, as well as the ProB2 pack.
Availability: In Stock
$50300
QTY
Free Shipping
Part #: 7901

The Hensel Extension Cable for EH Flash Heads adds 16.5' (5 m) of useful cable length between the EH Pro Mini and EH Pro Mini 1200 P flash heads and the Porty or Pro Mini 1200 AS power pack in use.

Features:
  • For EH Pro Mini / EH Pro Mini 1200 P
Availability: In Stock
$22600
QTY
Free Shipping
Part #: 13205

Speedotron Detachable Head Cable for 206VF - 20'. This is a replacement cable that is supplied with the Speedotron 206VF flash head.
Part #: 14200

This head extension cable will extend the length of the original cable by 25'. It fits the Black Line 206VF & 106 flash heads.
Availability: In Stock
$15296
QTY
Free Shipping
Part #: QF52

Needed for the third QFlash connected, and each one thereafter. Also required for a TTL adapter or remote sensor when used with 2 or more Qflashes.
Availability: In Stock
$5895
QTY
Free Shipping
Part #: YDC6

The Quantum Cable YDC6 for Turbo Compact Battery to fit Canon 1D & 1Ds Digital Cameras.
Availability: In Stock
$9495
QTY
Free Shipping
Part #: QF50

The QUQF50 offers continued TTL operation, even when your flash heads are in a soft box, umbrella or other light modifying setups, with an additional twenty (20) foot of QUQF50 TTL Control Cable, making it possible to retain full TTL operation, even in the most elaborate setups.
Availability: In Stock
$4195
QTY
Part #: HA6946P

The Hama Sub Mini to Male PC Sync Cord - 15' (4.5m) is a PC (Post Connection) Cord that connects a camera to a flash head, or monolight, enabling the flash to fire at the instant the shutter button is pressed. Many cameras do not have a PC terminal to connect this cord. If so, an additional Hot...
Availability: On Backorder
$1995
QTY
Part #: 122

This Hensel Standard Sync Cord is 16.4' (5 m) long with 6.3mm phone jack for connecting to a Hensel Porty EHT Head.
Availability: In Stock
$2300
QTY
Part #: 5791

The Hensel EH Pro Mini to Porty Adapter Cable permits use of the Pro Mini Head with the Porty Battery Operated Power Pack. This cable is 16.5' (5m) long.
Availability: In Stock
$12500
QTY