MAIL ORDER 800-321-4726
Shop By Category
Filter By

The Accessory Power CH-DUALION-ENEL3E Professional Series ReVive Dual-ion+ Battery Charger for Nikon EN-EL3E Batteries allows you to charge two lithium ion battery packs at once. Equipped with key features such as real-time LED status display, MPC fast & smart charging, auto-charge reduction,...
Availability: In Stock

The Accessory Power Dual-ion+ is a super fast 1000mA charger for a single battery or 500mA for 2, charging your batteries at record speeds! Fully charge 2 batteries in just 3 hours! The Dual-ion+ Charger comes with both an AC & DC charging cable so you can charge at home & in the car. The AC adapter s...
Availability: In Stock
Part #: 5307133

The Ansmann Powerline 4 Maxe PLUS with 4 AA Batteries is a economic pack of intelligent charger with Zero Watts technology which means it draws no energy when plugged in standby which saves your energy consumption and fully charged batteries. The charger is automatically switches to off mode when...
Availability: In Stock
Part #: 5044083

The Ansmann Battery Power Grip for Canon EOS Rebel XT/XTi is high capacity Li-Ion battery pack, an additional and alternate supply source for the Canon Rebel XT / Digital Rebel XTi camera. It is highly useful for longer shooting while on traveling to remote areas for an extended energy supply....
Availability: In Stock
Part #: 5025023

The Ansmann Universal Li-Ion Digicharger Plus is most suitable quick charger for Litium-Ion, NiCad and NiMH battery cells. The charger is highly efficient and safe as it is Microprocessor controlled which monitors all the charging and safety process of the most used batteries. The Universal charger...
Availability: In Stock
Part #: 5025113

The Ansmann Digicharger Vario is the best universal instant charging unit with complete control over Vmax technology for rechargeable battery packs required to be used in digital cameras, camcorders and mobile phones. It is universal charger and capable of charging almost all batteries in the...
Availability: In Stock
Part #: 7000042

The Ansmann NiCd NiMH alkaline rechargeable battery checker is a universal tester for NiCd and NiMH rechargeable batteries. Various sizes of the batteries could be checked for serviceability and charging on remote work places. This small, lightweight and portable unit can be used anywhere in the...
Availability: In Stock
Part #: DUAL-2722

The Anton Bauer's D-2722 Dual PowerCharger, 2 Battery Positions, 70 Watt AC Power Supply with DDM Module puts all the performance and advanced charging techniques of the QUAD 2702 PowerCharger into a compact two position simultaneous fast charger. The DUAL 2722 can be switched to a 70W power supply...
Part #: 84750067

The Anton Bauer's Tandem-70 On-Camera AC Power/Charger combines the functionality of a one position InterActive Charger with the convenience of a low noise, lightweight, camera mounted AC mains adapter. The Tandem will operate equipment from any worldwide AC source. It also doubles as a full f...
Part #: ANH140

This high power NiMH battery system is ideally suited to the power demands of today's high definition equipment and on-camera lighting systems. In lower power applications, it can provide power for many hours without limits or travel restrictions. The HyTRON 100/140 also offer an excellent cou...
Part #: 86750019

The DIONIC 90 can handle a 6"amp load and is the ideal battery choice when low weight and longer run-times are a priority. 14.4v 90 Wh (Nominal 95Wh; Typical 93Wh) Li Ion battery.
Part #: 83750156

The QR-DSLR Gold Mount brings simplicity to a variety of professional DSLR set-ups by providing an all-in-one power solution for the Canon DSLR cameras, and professional accessories.

The QR-DSLR provides 7.2v power to the camera via the Canon DR-E6 DC coupler while the PowerTap provides power...
Part #: QRC GOLD

The Anton Bauer's QRC-Gold Universal Compact Gold Mount Bracket with mounting instructions and 12” wire leads - This Gold Mount is similar to the QR-GOLD above but is approximately 3/4” smaller (4.7”H x 3.0”W x 0.5”D) which makes it ideal for mounting to smaller devices. Due to its smaller design,...

The PowerTap Multi is a PowerTap male connector to 4 female PowerTap receptacles. Expands any Gold Mount PowerTap to accomodate 4 separate devices. Perfect for powering multiple wireless receivers as well as an Ultralight from a single camera battery (10 amp. max).

The DSLR-ADP-ELPZ provides 7.2V power to the camera in two ways: using the Canon DR-E6 Coupler* it attaches directly to the back of DSLR shoulder rigs using the Shoe Mount or it can be worn with a pouch on the waist or tied to a tripod leg.
Part #: MD504ZM/A

The Apple's MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.


  • 24-inch Apple LED Cinema Display
  • 27-inch Apple LED Cinema Display
  • Apple
Availability: In Stock
Part #: ATOMPWS001

The Atomos Power Station Photo Continuous Power dual battery system allows batteries to be hot swapped ensuring you will never be without power in the field. The DC inputs lets you connect to AC power to charge the provided batteries up to 3x the rate of conventional chargers.

A flexible dual USB...
Availability: In Stock
Part #: ATOMACP001

The Atomos AC Power Supply can be used with ATOMOS's Samurai, Ninja 2 and Ninja recorders and comes with a set of four international socket adapters - for the U.S., E.U., U.K. and Australia.
Availability: In Stock
Part #: ATOMDTP001

The Spare D-Tap Dummy Battery from ATOMOS is designed for ATOMOS Ninja and Samurai Hard Disk Recorders. In case the main battery is completely discharged, you can use this spare battery as a replacement. A D-tap adapter is included. A D-tap cable is sold separately.
Availability: In Stock
Part #: ATOMCGR001

The ATOMOS ATOMCGR001 Battery Charger is designed to charge the battery which is used with the Ninja 10-bit DTE field recorder. It includes a 1000mA AC adapter plate for charging, and a power cable attached to the wall socket.
  • Designed to charge the battery which is used with the Ninja
Availability: In Stock
Part #: BC-27H

The Azden BC-27H Power Supply features Hirose power connector for use with compatible Azden FMX-42 and FMX-42a portable mixers.


  • Powers Newer FMX-42 and FMX-42a
  • Hirose Power Connection


Availability: In Stock
Part #: B3104507

The Broncolor Scoro S 3200 RFS 2 Power Pack (100-240V) is made for peak performance under intensive use. Its solid state design ensures trouble-free operation for years. It provides independent 1/10 stop control of each of three flash heads with very short flash durations, selectable color tem...
Part #: 45600

The Calrad 12VDC 1.5 Amp Regulated AC To DC Adapter is a wall mount regulated switch mode power supply. The adapter gives 12Vdc, 1.5A and operates from 110Vac to 220Vac automatically switches for each voltage. It has a 6 foot long cord for a wall mount plug and also features short circuit over...
Availability: In Stock
Part #: 0872C002

The Canon Battery Charger for EOS C300 Mark II Camcorder Batteries is a replacement battery charger used to charge BP-A30 and BP-A60 batteries for your Canon C300 MK II Camcorder. The charger features dual battery charging at the same time and has a detachable AC power cord. It operates on 100...
Availability: On Backorder
Part #: 0871C002

The Canon CA-A10 Power Supply AC Adapter is a replacement power supply for Canon C300 Mark II. It powers the camera when the camera battery is not installed, and charges the battery when the battery is installed. The power supply adapter uses AC and gives DC output to charge the battery.
Availability: On Backorder
Part #: 5752B002

Two battery packs can be attached. It takes about 130 minutes to charge one LP-E4N battery pack (120 minutes for LP-E4). It plugs directly into AC outlets, and with the optional CB-570 cable, into a car cigarette lighter.
Availability: In Stock
Part #: 2419A005
This dedicated charger, with discharge feature, quickly recharges the Ni-MH Pack NP-E2. For use with Power Drive Booster PB-E2(EOS-3 & EOS-1v only; do not use with EOS-1 or 1N.)
Availability: In Stock
Part #: 5261B001

This large capacity battery grip is powered by two Battery Pack LP-E6, six AA-size/LR6 batteries or an optional AC Adapter Kit ACK-E6. It features a variety of operating controls such as shutter button, Main Dial, multi-controller, AF point selection button, AE lock/FE lock button, AF start...
Availability: In Stock
Part #: 9130B001

The Canon BG-E16 Battery Grip is powered by two Battery Pack LP-E6N, six AA-size/LR6 batteries or an optional AC Adapter Kit ACK-E6. It features a variety of operating controls such as shutter button, Main Dial, multi-controller, AF point selection button, AE lock/FE lock button, AF start...
Availability: In Stock
Part #: 5849B002

The Canon CA-940 Compact Power Adapter gives you an endless power supply for your Canon cinema camera.

Works With:
  • C300
  • C500
Part #: 8038B001

The Canon BG-E13 Battery Grip for 6D Cameras is powered by two Battery Pack LP-E6 (one pack or two), six AA-size/LR6 batteries or an optional AC Adapter Kit ACK-E6. It features a variety of operating controls such as shutter button, Main Dial, AF point selection button, AE lock/FE lock button,...
Availability: In Stock
Part #: 5751B002

Designed to be used with the EOS-1D X, the LP-E4N is a high-capacity (2450 mAH) lithium-ion battery pack, offering approximately 10% larger capacity than the LP-E4. Exact battery info can be viewed on the camera's menu.

Compatible with:
  • EOS-1D Mark III
  • 1D Mark IV
  • 1D X
  • 1Ds Mark II
  • 1D C
Availability: In Stock
Part #: 8471B001

The Canon BG-E14 Battery Grip for Canon EOS 70D is a large capacity battery grip holding two Battery Pack LP-E6, six AA-size/LR6 batteries or an optional AC Adapter Kit ACK-E6. It features a variety of operating controls such as shutter button, Main Dial,, AF point selection button, AE lock/FE...
Availability: In Stock
Part #: 0050C001

The Canon BG-E18 Battery Grip is a battery grip developed for the Rebel T6s and Rebel T6i that enables high-volume shooting and easier vertical shooting. The grip holds one or two LP-E17 Battery Packs. It offers double-length shooting time. It also features vertical controls including a shutter...
Availability: In Stock
Part #: 1947B001

Canon Compact Battery Pack CP-E4 for the Canon 580EX/2, 550EX, 540EZ, 430EZ, MT-24EX and MR-14EX Speedlite Flash Units. The external Canon Compact Battery Pack CP-E4 improves flash recycle times significantly and increases the number of firings before batteries need to be replaced.
The pack takes...
Availability: In Stock
Part #: 4740B001

The Canon BG-E9 Battery Grip holds up to two LP-E6 battery packs or six AA Batteries to offer double-length shooting time. The vertical shutter release makes shooting with the camera in a vertical position just as comfortable as shooting horizontally.
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
Copyright © 2015 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.