CONTACT US AT 800-321-4726

Underwater Housing with TTL Circuitry for Canon EOS 5D Mark III, 5DS, or 5DS R

MFR Part #: 6871.04
Samy's Part #: S-041843
$1,79995
No tax collected on shipments to states other than California, Nevada, and Maryland
In-store prices may vary
Select Size:
QTY

Description

Rebates

Specifications

Items Included

Rate & Review


Ikelite have designed this housing to offer one of the best performance to dollar purchases in the world. The Ikelite Underwater Housing with TTL Circuitry for Canon EOS 5D Mark III, 5DS, or 5DS R is a seamless blend of functionality, lighting integration, durability and waterproof integrity. A compatible Lens Port is required for waterproof operation. Port not included. While the Canon 5D Mark III, 5DS, and 5DS R cameras are identical in physical characteristics, the 5DS series utilize a newer TTL flash protocol. Older housings produced originally for the 5D Mark III camera, Product Number 6871.03, will cause Ikelite DS strobes to over-expose by at least two f/stops in TTL mode when used with these newer cameras. This can be compensated for by dialing in negative EV compensation through the back of the housing, or using the strobes in manual exposure mode.

Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes. Fiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.

Exposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments. An over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.

This housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1/4-20 threaded top mount provides an additional attachment point for lightweight accessories. Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.

Like every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry. This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.

Features:
  • 200 ft (60m) depth rating
  • All important camera functions are accessible
  • Controls are not provided for Multi-Controller, Depth-of-Field Preview Button
  • Ikelite bulkhead connector with built-in TTL circuitry
  • Slightly negative buoyancy in fresh water
  • Actual buoyancy varies depending on choice of lens and port
  • Weight 5.4 lb (2.4 kg) not including tray + handles
  • Dimensions 10 x 6.9 x 6.5 in (25 x 17.5 x 16.5 cm) including projections

Customers Also Browsed

Underwater Housing Information
Material Polycarbonate
Controls Control Type: Mechanical push-buttons, knurled dials, and a lever Controls: Allow access to all camera functions except multi-controller and depth-of-field preview button
Depth Rating 200' / 60 m
External Flash Connector Built-in, proprietary circuitry and Ikelite bulkhead connector for TTL/manual exposure with optional strobes Updated circuitry for proper exposure with 5DS and 5DS R
Dimensions 9.8 x 6.9 x 6.5" / 25 x 17.5 x 16.5 cm
Weight 5.3 lb / 2.4 kg without tray and handles
  • Zoom or Focus Clamp and Gear Sleeve Set for Lenses 2.8
Be the First to write a Review.
See any errors? Let us know.
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]