With sound, the set-up is similar. Connect the sound sensor to the Control Unit and the Control Unit to the camera, adjust the sensitivity if you want the camera to fire only at very loud sounds and when that sound is detected, the TriggerSmart will trigger your camera to shoot. Single shots or continuous shooting are both possible. When using the system to detect movement with the Infra-red beam it is necessary to use both sensors, one to send the IR beam and one to receive it. With the receiving sensor connected to the Control Unit and the Control Unit to your camera, as soon as something moves through the IR beam, the camera fires.
|Remote Transmitters Information|
|Power Source||x4 AA batteries, high power type, non-rechargeable or AC to low voltage PSU 6-9V DC at 100 milliamps. UK22 AC power unit recommended.|
|Dimensions||7.5 x 5.5 x 2" (19 x 14 x 5 cm)|
|Weight||11.5 oz (326 g)|