CONTACT US AT 800-321-4726

Riggy-Micro Dual-XLR Preamplifier with Phantom Power

MFR Part #: RM222
Samy's Part #: S-023434
In-store prices may vary
Select Size:
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726



Items Included

Rate & Review

The RM222 Riggy-Micro Dual-XLR Preamplifier with Phantom PowerjuicedLink is designed for cameras featured with audio meters, manual gain control, and a headphone output. It is highly efficient in operation, small size, and has a lightweight design for mounting flexibility.

It features 2 locking XLR input channels with low-noise microphone preamplifiers with a Mic/Line level switch, a Hi/Lo gain switch, and a Phantom power switch. The onboard Phantom power voltage is selectable between 48V/12V. The inputs can also be summed mono, copying each input to both sides. It uses 9v battery for powering up.

2XLR inputs low-noise preamp with 48V/12V phantom power. "Riggy-Micro" means that it is super small/light/power efficient and has numerous mounting and accessory options. Audio output bracketing for camera overload protection. Alkaline/LiPolymer operation. Selective power-down mode.

The Riggy-Micro RM222 is a feature rich low noise preamp, built tough, and refined to provide the best power efficiency, smallest size, and lightest weight. It's small size and light weight also makes it unique in terms of flexibility for mounting it to your gear. Additionally, it has features that make it even more useful, allowing you to mount other accessories (mics, wireless receivers, etc) to the preamp.

It is more than just a low-noise preamp with sweet audio features. It takes advantage of the valuable real estate when mounted to your camera to be able to mount more accessories to your camera (mics, wireless receivers, etc.). First, the Riggy-Micro has Riggy mounting points allowing you to mount a RB401 Riggy Bracket, which has 4 cold shoe mounts and lots of mounting holes for attaching more accessories to your camera, like microphones and wireless receivers, etc.

The Riggy-Micro is also so small and light, that it can be mounted on top of your camera in the hot-shoe. It's quite nice to get the preamp off of the bottom of your camera. Now, you can attach a battery grip, or just cradle the camera/lens in the palm of your hand, like a DLSR is traditionally held. You will seperately purchase a cold-shoe to 1/4-20 male to mount to the 1/4-20 female on the bottom of the Riggy-Micro. While mounted on top of your camera, you can add cold shoe mounts (one on the top, and another on the right side) directly to the Riggy-Micro enclosure, using the RB101 Riggy Cold Shoe Attachment.

  • Two Locking XLR Input Connectors
  • Low-Noise Microphone Preamplifiers
  • Switchable 12V / 48V Phantom Power
  • Audio Output Bracketing Feature
  • Mic/Line Signal Level Switches
  • Hi/Lo Gain Level Switches
  • Optional Mono Summing
  • Selective Power-Down
  • 1/8" Output for DSLR Compatibility
  • Powered by a 9V Battery

Customers Also Browsed

  • 9 In. (23cm) Length, 1/8 In. (3.5mm) TRS Stereo Audio Cable
  • 1/8 In. Hex Key
  • Black Nylon 1/4-20 Nut
  • Cork Strip
  • Limited 1-Year Warranty
Be the First to write a Review.
See any errors? Let us know.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.