CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 27001
Samy's Part #: S-021112

Get above the Action with UK Pro Standout Pole (22 in., Blue). Designed to make capturing the best wide angle footage of your action easy, the UKPro Camera Poles will give you angles you never could have dreamed of. Take it to the slopes, to the waves or on your skateboard, or use it in team sports...
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DDMNTGOPRO
Samy's Part #: S-032869

Mount your GoPro® Hero action camera to any standard 1/4”-20 photography accessory with Delkin Devices Fat Gecko 1/4-20 Adapter for Gopro HERO Cameras, including any Fat Gecko Camera Mount, monopod, tripod, Gorillapod® and much more. Combine it with any of our Fat Gecko camera mounts and securely...
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 131D
Samy's Part #: MANF131D

The Manfrotto 131D Side Arm mounts on the center post of tripods with a 3/8" thread. It allows easy shooting straight down to the ground without having to get the tripod column and legs into the picture. Double-sided screws (1/4-20" on one side, 3/8" on other) enable cameras to be mounted on either...
Availability: On Backorder
$7794
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 357PLV
Samy's Part #: MANF357PLV

Supplied with 2 x 1/4" and 2 x 3/8" camera fixing screws.
Availability: In Stock
$2488
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: JB1390
Samy's Part #: S-043792

Take your mobile photography to the next level with this flexible smartphone/small tablet tripod. The GripTight Gorillapod offers you all the adaptability of the original Gorillapod, but for your phone or small tablet. Easily wrap the legs around trees and poles, or just get the balance you need...
Availability: In Stock
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RSTAA4
Samy's Part #: S-051673

The Tether Tools Rock Solid Tripod Cross Bar lets you mount your Tether Table Aero on the same solid support as your camera to build a custom, ideal workstation that meets your specific needs. The Rock Solid Tripod Cross Bar with 4 heads mounts to a tripod center column 3/8″ thread. It can also mount to a li...
Availability: On Backorder
$12995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 323
Samy's Part #: MANF323

The Manfrotto 323 RC2 Rapid Connect Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet. Its compact 200PL-14 quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.

The 323 adapter allows quick...
Availability: On Backorder
$3414
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1099
Samy's Part #: S-008888

This heavy duty dolly works equally as well with tripods or light stands. The rests for the feet of the legs of either a tripod or light stand are adjustable up to 17" from the center. The foot locks adjust up to 2". Thus, this dolly will work with almost any tripod or light stand. The 3" wheels...
Availability: On Backorder
$4995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: TB1103MC
Samy's Part #: S-026698

The TetherBlock MC is designed to help protect your cameras data connection port whether shooting on a tripod or hand held. Camera data ports are fragile. One pull from a data cable connected to a camera can cause expensive camera repair and a camera out of service on an important shoot!

TetherBlock...
Availability: On Backorder
$8995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PU40
Samy's Part #: S-039554

The Benro PU40 Universal Quick-Release Plate fits any camera body, slide-proof rubber mat ensures high stability, strength resistance between camera, lower rotatement and to secures the camera anti-worn. The reasonable plate design and moveable screw offers wide-range adjustment for shooting angel....
Availability: In Stock
$3000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MTWISTGRIP
Samy's Part #: S-052365

The Manfrotto TwistGrip Tripod Adapter Clamp for Smartphones is a universal smartphone clamp specifically designed for all smartphone. The clamp has a sturdy secure aluminum body to ensure that Smartphone is firmly supported while shooting pictures and videos. The twist movement and a locking knob...
Availability: On Backorder
$4988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: R116.138
Samy's Part #: MANFR116138

The Manfrotto 1/4 In. Camera Mounting Screws (Pack of 2)is set of two 14 In. threaded screws to use with Manfrotto 357PL Sliding Plate, 410PL Quick Release Plate, 501PL Rapid Connect Sliding Plate and the 504PLONG Long Quick-Release Mounting Plate.

Features:
  • Replacement set of 1/4 In. Screws
...
Availability: On Backorder
$749
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: LPC5DIII
Samy's Part #: S-040194

The newly launched Benro LPC5DIII Quick-Release L-Plate for Canon 5D Mark III is made of anti-abrasive, high-density Aero metal material for light-weight, anti-vibration and feature high-grade safety. It is also completely compatible with Arca-Swiss QR style accessories. The L-bracket features...
Availability: In Stock
$14000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 500PLONG
Samy's Part #: S-038326

The Manfrotto 500PLONG Video Camera Plate is a long version of the standard plate. The plate allows perfect balance for camcorders with unusual weight distribution caused by long telephoto lenses or heavy batteries. It is supplied with 1/4" and 3/8” camera screws and an anti-rotation pin.
Availability: In Stock
$2988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 618740
Samy's Part #: SLIK618740

Replacement or spare quick release plate for the DQ-20 quick release adapter, SH-704E and AF-1100E head, or the 3-way head supplied with the Sprint Pro tripod.
Availability: In Stock
$1495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA5134
Samy's Part #: HAMAHA5134

The Hama Tripod Camera Screw - 1/4" is a 1-1/8" (30mm) knurled plastic knob with female 1/4"-20 thread on the bottom and a 1/4"-20 male thread on a 7/16" (11mm) long stud on the top.
Availability: In Stock
$399
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 143BKT
Samy's Part #: MANF143BKT

The Manfrotto 143BKT Camera Platform is a replacement camera platform for the Magic Arm. It has a standard 1/4-20 inch thread mount for a small camera.
Availability: In Stock
$1395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL-0916
Samy's Part #: S-034275

The new DLC Smartphone Tripod Mount is designed to accept almost any Smartphone on the market today. Featuring a double adjustment design, this adapter adjusts from 2" to 4" to securely hold the phone. The DLC Tripod Mount Adapter is designed with soft rubber grips to hold the phone securely and...
Availability: In Stock
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PMU50
Samy's Part #: S-029653

The MeFOTO Quick Release Plate For BackPacker and RoadTrip Tripods is a 37 x 50mm Arca Swiss Style replacement Quick Release Plate for additional cameras that is normally the part of BackPacker and RoadTrip Tripod Kits.
Availability: In Stock
$2800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BS100
Samy's Part #: WIMBBS100

The Wimberley BS-100 Brass Reducer Bushing screws into the female threading upon the tripod collars of some larger telephoto lenses, essentially converting the hole to act like a 1/4"-20 threaded socket. Wimberley quick release plates use 1/4"-20 screws, not the larger 3/8"-16 size.
  • Used to
...
Availability: In Stock
$285
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: ZVCTTP
Samy's Part #: S-037256

The Zacuto VCT Tripod Plate adapts any standard tripod head into a VCT-14 style tripod. This tripod Plate will accept the VCT Universal Baseplate and allow for quick transitions between shoulder mounted and tripod shooting. It is highly recommended for use with Zacuto Next Generation Recoil rigs.

...
Availability: On Backorder
$27000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PMU60
Samy's Part #: S-029654

The MeFOTO Quick Release Plate For GlobeTrotter Tripods is a 37 x 60mm Arca Swiss Style replacement Quick Release Plate for additional cameras that is normally the part of GlobeTrotter Tripod Kits.
Availability: In Stock
$2800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BL75
Samy's Part #: S-030435

The Benro 75HB 75mm Half Ball Adapter is a useful adapter for 3/8-16 Flat Base Tripod Heads. Tie down handle included. The adapter is made from high quality material for long life and extra strength.
Availability: On Backorder
$5000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DL0609P
Samy's Part #: DOTLDL0609P

Positive tilt for ease of operation. Rotates 360 degrees, tilts 90 degrees. All metal construction. For use on a tripod, camera stand or any other surface with has an exposed 1/4 x20 mounting stud.
Availability: In Stock
$2295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: P6
Samy's Part #: S-047725

The iKan Quick Release Adapter with Plate (E-Image) is used to add an E-Image tripod plate to camera support or to grip equipment. The baseplate system allows you to quickly move your camera between accessories without switching baseplates. To balance your camera on tripods the quick-release plate...
Availability: In Stock
$4995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2181
Samy's Part #: S-013315

The Quick-Release Lens Plate - 3" Long is an Arca-compatible support for a tripod mount for a long lens. To form a complete quick-release system for the lens tripod mount, the 3" long plate works with Arca-style clamps from Arca-Swiss, Kirk, Wimberly, Really Right Stuff, Foba, and heads from...
Availability: In Stock
$3995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 363002
Samy's Part #: S-047805

The BlackRapid FastenR-T1 for Manfrotto 200PL-14 QR Plate is a threaded post to fit standard tripod-mount hole on camera in conjunction with a Manfrotto RC-2 200PL-14 quickplate; stainless steel with d- ring. Finished, solid stainless-steel design provides an easy and secure connection to your...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PU5060
Samy's Part #: S-025450

The Induro Quick Release Plate II is a plate that attaches to your camera's telephoto lens tripod collar screw mount for easy and quick placement on and off the tripod head clamp. It is a universal Quick Release plate compatible with all digital cameras. It offers an exceptionally strong universal...
Availability: In Stock
$3000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: CPND800
Samy's Part #: S-040188

The Benro CPND800 Quick-Release Camera Plate for Nikon D800, D800E and D810 is an advanced features and elegant designs product for photographers that's specifically manufactured for the Nikon D800, D800E and D810 Cameras. The dovetail fits most Arca-style clamps, enabling quick release from many...
Availability: In Stock
$5000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: P-10
Samy's Part #: WIMBP10

The Wimberley P10 Quick Release Plate has safety stops at the front and back of plates to keep your expensive lens from accidentally slipping out of the quick-release clamp. These stops are removable; simply remove them with the hex key. The two stop screws will straddle the length of most quic...
Availability: In Stock
$5195
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: MBMSTRAP1
Samy's Part #: S-016415


The Manfrotto MSTRAP-1 Tripod Shoulder Strap allows you to carry the tripod comfortably across your shoulder and attaches easily under the head of the tripod and around the tripod feet. 

The MSTRAP-1 Tripod Shoulder Strap is a narrow 1.57" strap that can be be used with 190 and 055 Series Ma...
Availability: In Stock
$2879
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: LPND800
Samy's Part #: S-040196

The newly launched Benro LPND800 Quick-Release L-Plate for Nikon D800 and D810 is made of anti-abrasive, high-density Aero metal material for light-weight, anti-vibration and feature high-grade safety. It is also completely compatible with Arca-Swiss QR style accessories. The L-bracket features...
Availability: In Stock
$14000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 410PL
Samy's Part #: MANF410PL

The Manfrotto 410PL Quick Release Plate is a low profile plate that is larger than Manfrotto's standard RC2 system's plate. It comes supplied with both 1/4"-20 and 3/8" threaded screws, and its screw travels along a 2" grooved slot, to better accommodate professional cameras of different dimensions....
Availability: On Backorder
$1590
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: CPC5DIIIB
Samy's Part #: S-040191

The Benro CPC5DIIIB Quick-Release Camera Plate for Canon 5D Mark III with BGE-11 Grip is an advanced features and elegant designs product for photographers that's specifically manufactured for the Canon 5D Mark III with BGE-11 Grip. The dovetail fits most Arca-style clamps, enabling quick release...
Availability: In Stock
$6000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DL-0910
Samy's Part #: S-051618

The Dot Line Corp. Mini Tripod with Ball Head is both stylish and practical in it’s design. Easily carried, weighing only 5.6 oz. yet it will support a camera and lens up to 3.3 lbs. Legs easily lock into two positions from 5.6” to 4.1“. By removing the ball head, the tripod is only 2” high for low angle shots...
Availability: On Backorder
$1999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG007312
Samy's Part #: S-042062

The Kupo Tethermate Stand Plate for Laptop is a small, strong, and lightweight platform for the professional photographer who needs to shoot tethered. The Tethermate is a portable platform that features an adapter beneath the plate with two 5/8" (16mm) Baby Receivers and 1/4" & 3/8" female thread...
Availability: On Backorder
$7750
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]