CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DL-0916
Samy's Part #: S-034275

The new DLC Smartphone Tripod Mount is designed to accept almost any Smartphone on the market today. Featuring a double adjustment design, this adapter adjusts from 2" to 4" to securely hold the phone. The DLC Tripod Mount Adapter is designed with soft rubber grips to hold the phone securely and...
Availability: In Stock
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 131D
Samy's Part #: MANF131D

The Manfrotto 131D Side Arm mounts on the center post of tripods with a 3/8" thread. It allows easy shooting straight down to the ground without having to get the tripod column and legs into the picture. Double-sided screws (1/4-20" on one side, 3/8" on other) enable cameras to be mounted on either...
Availability: On Backorder
$7794
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: R116.138
Samy's Part #: MANFR116138

The Manfrotto 1/4 In. Camera Mounting Screws (Pack of 2)is set of two 14 In. threaded screws to use with Manfrotto 357PL Sliding Plate, 410PL Quick Release Plate, 501PL Rapid Connect Sliding Plate and the 504PLONG Long Quick-Release Mounting Plate.

Features:
  • Replacement set of 1/4 In. Screws
...
Availability: On Backorder
$749
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 577
Samy's Part #: MANF577

Compatible with the 501PL camera plated (supplied with the head 501HDV, 503 and 519 Video Heads) and the special 501PLONG accessory plate. This Quick Release adapter gives you the freedom to remove the camera from the head without detaching it from the plate and put it on any other support. Supplied...
Availability: In Stock
$4888
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MS050M4-RC4
Samy's Part #: S-018398

The Manfrotto RC4 L Bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position. Manfrotto L Bracket combines lightness with maximum support. The...
Availability: In Stock
$13988
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 143BKT
Samy's Part #: MANF143BKT

The Manfrotto 143BKT Camera Platform is a replacement camera platform for the Magic Arm. It has a standard 1/4-20 inch thread mount for a small camera.
Availability: In Stock
$1395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 618330
Samy's Part #: SLIK618330

Replacement quick release plate for the Able 300DX tripod and tripod head, Pro 330 DX, Pro 340 DX, Pro 400 DX, Pro 500 DX and SH-705E tripods. With 1/4"-20 camera screw.
Availability: In Stock
$1495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 131DDB
Samy's Part #: MANF131DDB

The Manfrotto 131DDB Tripod Accessory Arm for Four Heads mounts onto the center column of tripods with 3/8" threads. The platforms feature 3/8" screws, which allows a standard tripod head to be mounted on either or both sides. In addition, the horizontal bar features 3/8" screws on both ends,...
Availability: In Stock
$12995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 520BALL
Samy's Part #: MANF520BALL

The Manfrotto 520BALL 75mm Half Ball is designed to facilitate quick leveling of a 75mm ball head with the 3283 tripod, and has a 3/8"-16 threaded screw. It can also be used with the Gitzo G-1422 75mm Bowl Interface Adapter to provide an economical and low profile levelling base with any of the...
Availability: On Backorder
$4395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 394
Samy's Part #: MANF394

The Manfrotto 394 RC4 Low-Profile Rectangular Quick Release Adapter is designed to convert heads without a quick-release plate. Supplied with 1/4"-20 and 3/8" camera fixing screws and 3271 Quick Release plate. Equipped with two built-in spirit levels.
Availability: In Stock
$4488
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: CPND800
Samy's Part #: S-040188

The Benro CPND800 Quick-Release Camera Plate for Nikon D800, D800E and D810 is an advanced features and elegant designs product for photographers that's specifically manufactured for the Nikon D800, D800E and D810 Cameras. The dovetail fits most Arca-style clamps, enabling quick release from many...
Availability: In Stock
$5000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: QR11LG
Samy's Part #: S-053865

Designed to make flipping the camera from portrait to landscape mode, the gray-finished 3 Legged Thing QR11-LC Universal L-Bracket is useable with a wide variety of cameras including Nikon, Canon, Sony, Fuji, Olympus, and Pentax. Compatible with Arca Swiss or Arca Swiss-type quick releases,...
Availability: On Backorder
$4499
Original Price: $49.99
instant Rebate(s): $5
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: JB01389
Samy's Part #: S-043791

The Joby GripTight PRO Smartphone Mount is a premium clamping mount that keeps your phone secure in any situation. GripTight Mount PRO fits any smartphone and offers a robust, locking and rotating solution for more optimal set-up of photos and videos. It allows to mount smartphone to standard...
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: Z-MAC
Samy's Part #: S-052604

This GTX Studio Zuma Metal Locking Foot with Threaded Post is a 1/4x20 locking all metal standard male tripod post with female flash foot, designed to mount accessories which have a 1/4x20 threaded female receptacle to cameras, brackets, etc., which have a standard accessory shoe. All metal, locking...
Availability: On Backorder
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL-0910
Samy's Part #: S-051618

The Dot Line Corp. Mini Tripod with Ball Head is both stylish and practical in it’s design. Easily carried, weighing only 5.6 oz. yet it will support a camera and lens up to 3.3 lbs. Legs easily lock into two positions from 5.6” to 4.1“. By removing the ball head, the tripod is only 2” high for low angle shots...
Availability: On Backorder
$1999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 459000
Samy's Part #: S-006613

PH-07 Quick Release Plate for BH-001-M Ballheads.
Availability: In Stock
$1500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: GSR380
Samy's Part #: S-041076

The Benro SystemGo 3 GoRail (80cm Long) is effective sliding platform for professional photography. It is used with #3 series SystemGo tripods. This platform is 80 cm long and is best suited for advertisement / fashion industry. The sliding platform is made of high quality material for long life...
Availability: In Stock
$3600
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 910710
Samy's Part #: S-046819

The Ricoh TE-1 Extension Adapter is designed specifically to improve live streaming and long term interval shooting capabilities when using a tripod, by making USB and HDMI terminals fully accessible. Normally, when using a THETA mounted to a tripod, the HDMI and USB terminals (at the bottom of...
Availability: On Backorder
$1900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PU60
Samy's Part #: S-005690

Spare/Replacement Slide-In QR Plate with 1/4-20 Thread for Model B-2, B-3 BallHeads and other Arca-Swiss compatible Quick Release Clamps.
Availability: In Stock
$3000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BS100
Samy's Part #: WIMBBS100

The Wimberley BS-100 Brass Reducer Bushing screws into the female threading upon the tripod collars of some larger telephoto lenses, essentially converting the hole to act like a 1/4"-20 threaded socket. Wimberley quick release plates use 1/4"-20 screws, not the larger 3/8"-16 size.
  • Used to
...
Availability: In Stock
$285
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 618735
Samy's Part #: SLIK618735

This fits the 502QF, 503QF, 504QF, 512QF, 523QF & DST-1 Tripod. It has a standard 1/4"-20 threaded camera screw as well as a video alignment pin.
Availability: In Stock
$1395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DDMNTGOPRO
Samy's Part #: S-032869

Mount your GoPro® Hero action camera to any standard 1/4”-20 photography accessory with Delkin Devices Fat Gecko 1/4-20 Adapter for Gopro HERO Cameras, including any Fat Gecko Camera Mount, monopod, tripod, Gorillapod® and much more. Combine it with any of our Fat Gecko camera mounts and securely...
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 13038
Samy's Part #: MANF13038

The Manfrotto 13038 Hexagonal Quick Release Plate has a non-protruding 3/8" screw head.



Replaces item # 3042




Availability: In Stock
$2100
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: TB1103MC
Samy's Part #: S-026698

The TetherBlock MC is designed to help protect your cameras data connection port whether shooting on a tripod or hand held. Camera data ports are fragile. One pull from a data cable connected to a camera can cause expensive camera repair and a camera out of service on an important shoot!

TetherBlock...
Availability: On Backorder
$8995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: LPND800
Samy's Part #: S-040196

The newly launched Benro LPND800 Quick-Release L-Plate for Nikon D800 and D810 is made of anti-abrasive, high-density Aero metal material for light-weight, anti-vibration and feature high-grade safety. It is also completely compatible with Arca-Swiss QR style accessories. The L-bracket features...
Availability: In Stock
$14000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: MTWISTGRIP
Samy's Part #: S-052365

The Manfrotto TwistGrip Tripod Adapter Clamp for Smartphones is a universal smartphone clamp specifically designed for all smartphone. The clamp has a sturdy secure aluminum body to ensure that Smartphone is firmly supported while shooting pictures and videos. The twist movement and a locking knob...
Availability: In Stock
$4988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MSQ6PL
Samy's Part #: S-026485

Camera attachment plate for use with Manfrotto's Arca-compatible Quick Release Plate for Q6 Top Lock System, developed to offer photographers a fast, easy to use and very secure quick release mechanism suitable for heavy pro camera equipment. The plate has a redesigned screw, which can be tightened...
Availability: In Stock
$2488
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DL-5415
Samy's Part #: S-018923


The Dot Line DLC LED Camera Level is straightforward to function right out of the program with the manufacturer configurations, yet can be modified by the photography to ensure his or her accurate specifications are met. The Dot Line DLC LED Camera Level is designed to indicate level for either straight or horizontally

...
Availability: On Backorder
$3995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: LPC5DIII
Samy's Part #: S-040194

The newly launched Benro LPC5DIII Quick-Release L-Plate for Canon 5D Mark III is made of anti-abrasive, high-density Aero metal material for light-weight, anti-vibration and feature high-grade safety. It is also completely compatible with Arca-Swiss QR style accessories. The L-bracket features...
Availability: In Stock
$14000
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: LBA2
Samy's Part #: S-033261

The Benro LBA2 Leveling Base easily convert any flat surface with a 1/4"-20 or 3/8"-16 thread to one with +/- 15° of leveling control. The plate is made of high quality material for long life and more reliability.
Availability: In Stock
$12000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: TB-QR-004G
Samy's Part #: S-050477

The TetherBLOCK QR Plus Arca-Type Quick Release Plate for Tethered Photography (Grey) is specifically designed to adapt a camera to an Arca-type compatible quick release clamp. The tether block prevents damage to the camera's data port while tethered to a computer or hard drive. The surface...
Availability: On Backorder
$9995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 27001
Samy's Part #: S-021112

Get above the Action with UK Pro Standout Pole (22 in., Blue). Designed to make capturing the best wide angle footage of your action easy, the UKPro Camera Poles will give you angles you never could have dreamed of. Take it to the slopes, to the waves or on your skateboard, or use it in team sports...
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MPH300TA
Samy's Part #: S-053175

The MeFOTO SideKick360 Smartphone Tripod Adapter (Titanium) is a smartphone adapter that provides mobile photographers and filmmakers with camera support allowing them to make sharp photos, videos, time-lapse and long exposures. Easy to mount to practically any tripod on the planet. What's your...
Availability: In Stock
$3900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: P6
Samy's Part #: S-047725

The iKan Quick Release Adapter with Plate (E-Image) is used to add an E-Image tripod plate to camera support or to grip equipment. The baseplate system allows you to quickly move your camera between accessories without switching baseplates. To balance your camera on tripods the quick-release plate...
Availability: In Stock
$4995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: JB1390
Samy's Part #: S-043792

Take your mobile photography to the next level with this flexible smartphone/small tablet tripod. The GripTight Gorillapod offers you all the adaptability of the original Gorillapod, but for your phone or small tablet. Easily wrap the legs around trees and poles, or just get the balance you need...
Availability: In Stock
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 459050
Samy's Part #: S-006517

Spare/Replacement Slide-In QR Plate with 1/4-20 Thread for Model B-0, B-1 BallHeads and other Arca-Swiss compatible Quick Release Clamps.
Availability: In Stock
$3000
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]