The Paramount Cords 2-6C Household to PC Male (Coiled 21 In. to 5 ft.) is coiled heavy duty sync cord used to connect flash with a female PC receptor, a camera, sync extension or triggering device that has a female PC terminal. The cord extends from 21 inches to 5 feet long when required.
The Phottix N8 Extendable Spiral Cable for Select Nikon Kodak and Fuji Cameras (3.3 ft.) connects compatible Phottix products to Nikon, Kodak and Fuji cameras. It is high quality cable for connecting Phottix products such as Cleon II, Plato and Strato Series Flash triggers to cameras.
The Phottix C8 Extendable Spiral Cable for Select Canon EOS Cameras (3.3 ft.) connects compatible Phottix products to compatible Canon cameras. High quality cable for connecting Phottix products such as Cleon II, Plato and Strato Series Flash triggers to cameras.
The JTL Lighting Radio Trigger and Receiver Slave Set is designed for photographic studios and on-location work. It works at distance of 60 feet to 433MHz Frequency. It provides a remote transmission with low consumption. It is safe for all digital cameras. There are four possible combinations...
Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 16" straight Miniphone to Miniphone Cable.
This Paramount 16" straight Household Male to Male Miniphone sync cord enables firing of a strobe head or power pack that accepts a male household style plug, from a Pocket Wizard Radio Slave Receiver or transceiver.
The PocketWizar PW-DC-N10 Nikon DSLR Power Cable for MiniTT1 and Plus III Transmitters provides power to on-camera MiniTT1, Plus III, or MultiMAX directly from a Nikon camera's 10-pin remote terminal. It is compatible with any Nikon camera with a 10-pin remote shutter release terminal and MiniTT1...
The JTL Lighting DigiFirer Radio Receiver is a digitized radio trigger system designed for photographic studios and on-location work. The receiver is attached to your light and accepts the signal from The Digifirer trigger. This receiver straps onto your light, with an included mini plug adapter...
Control multiple Hot Shoe Flashes, multiple manual studio lights, or a combination of both by providing a choice of four channels over four separate groups. The Phottix Strato II Wireless Multi 5-in-1 Trigger Set can be used as a wired or wireless shutter release. The 2. 4 GHz. transmitter and...
The ALPA 12 FPS Cable Type D2 is a cable type D2 for wireless triggers, Lemo 3 to mono jack 3.5 mm for using electrical cable releases and multi-shot backs.
The Paramount Cords 2-6C Household to PC Male (Coiled 21 In. to 5 ft.) is coiled heavy duty sync cord used to connect any sync extension cord to a power pack, monolight, a camera or triggering device that has a female PC (post connection) terminal. The cord extends from 21 inches to 5 feet long...
Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 10' straight PC to Miniphone Cable.
Fire your Nikon SLR wirelessly and remotely from up to 100 feet away using the MicroSync Digital Kit. This MicroSync Motor Drive Cord will allow you to fire a Nikon SLR with 10-pin remote socket wirelessly and remotely from up to 100 feet away using the MicroSync Digital Kit. One end connects...
Quantum 467 Motor Drive Cord for Mamiya 645AF compatible with 405, 505, 505i. Motor drive cords connect to the camera's remote cable socket, and enables a Quantum Radio Slave or FreeXwire unit to trigger the camera's shutter. This cable will trigger the Mamiya 645AF camera.
The Paramount PW-MPCF Adapter is a molded piece that features a female PC tip on one side, and a mini-phone plug on the other side. This will allow a sync cord ending in a male PC tip to connect to equipment with a Monophone socket.
This Induro 2.4" QR2 Slide-In Quick Release Plate for DM-Series Heads is for use with the DM-series ballheads, this plate is compatible with the smaller DM-01 or DM-12 ballheads and it comes with a 1/4"-20 camera screw with non-skid strips.
The ALPA protection cover Mk II is used for protection to front or the back of the Alpa 12 camera. it also keeps the dust and dirt away from the camera.
Features:
Protection to front or the back of the Alpa 12 camera
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.