CONTACT US AT 800-321-4726
Scrims & Flags
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 159015
Samy's Part #: MATT159015

Please Note: This item ships freight only

The Matthews Solid Frame Scrim White Artificial Silk (48x48 In.) is a handy accessory to keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames...
Availability: On Backorder
$10625
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 999004
Samy's Part #: MATT999004

The Matthews Hollywood C+ Survival Kit contains the 2x C+ Stands, 2x Adapters 1x1/8" to 5/8", 2x Hollywood 2x1/2" Grip Heads, 2x Hollywood 40" Gobo Arms, 4x Matthbags, 2x12"x18" Flags,2x12"x18" Single Scrim Black, 2x12"x18" Double Scrim Black, 2x12"x18" Artificial Silk Diffuser, 1 Carrying Case. The term ‘Century Stand’ goes...
Availability: In Stock
$1,66080
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 1957
Samy's Part #: S-031826

The Westcott Fast Flags Scrim Kit (24x36 In.) is used to quickly diffuse light on set by 2 full stops. Shape or subtract light on set using this heavy-duty black block. A well-equipped Fast Flags Scrim Kit consists of an assortment of 24x36" light diminishing Flags and Diffusion Fabrics in a storage...
Availability: In Stock
$21000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 319000
Samy's Part #: MATT319000
Availability: In Stock
$21250
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 149052
Samy's Part #: MATT149052

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
$3185
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 149043
Samy's Part #: MATT149043

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
$2495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 350595
Samy's Part #: MATT350595

Matthews Road Rags are a portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. The elastic corded frames easily fold for storing and transporting. A simple...
Availability: In Stock
$23885
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 149566
Samy's Part #: MATT149566

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: On Backorder
$5015
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 169067
Samy's Part #: MATT169067

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
$14875
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 169059
Samy's Part #: MATT169059

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: In Stock
$3910
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 169010
Samy's Part #: MATT169010

The Matthews Flag (24x30 In.) is used to protect the camera lens from flares or to control spill light from other sources, or to keep light from reaching certain areas on the set. The newly designed 90 deg. Flag will make it possible to position the instrument over the top of the set wall or to...
Availability: In Stock
$3755
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 149063
Samy's Part #: MATT149063

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
$5355
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1937
Samy's Part #: S-044590

The Westcott Fast Flags Scrim Kit (18x24 In.) is used to quickly diffuse light on set by 2 full stops. Shape or subtract light on set using this heavy-duty black block. A well-equipped Fast Flags Scrim Kit consists of an assortment of 18 x 24" light diminishing Flags and Diffusion Fabrics in a...
Availability: In Stock
$16500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 149058
Samy's Part #: MATT149058

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
$3185
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 149061
Samy's Part #: MATT149061

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: On Backorder
$5525
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 169028B
Samy's Part #: MATT169028B

Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new Matthews 48x48 In. Floppy Cutter Bottom Hinge (Opens to 48x90 In.), there are now three...
Availability: In Stock
$14875
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
$33595
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 209641
Samy's Part #: MATT209641

For mounting of lighting fixtures.
Availability: In Stock
$1895
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YFPF110110
Samy's Part #: S-043796
Availability: In Stock
$14999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 319089
Samy's Part #: MATT319089
Availability: On Backorder
$23800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 169001
Samy's Part #: MATT169001

The Matthews 30x36 In. Flag use only a single, horizontally angled support arm which allows for 'close-in', right angle, tight positioning over set walls and interlocking of flags to establish a tightly controlled spread of light. The flags are used to control natural or artificial light beside...
$5525
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 999012
Samy's Part #: MATT999012

The Matthews Lighting Control Kit (18x24 In.) includes 18x24 inches Single Scrim (Black), 18x24 inches Double Scrim, 18x24 inches Artificial Silk, 18x24 inches Flag, 18x24 inches Cello Cucoloris, 18x24 inches Wood Cucoloris and Carrying Bag. Lighting Control Carrying Bag is made of 1000 denier...
$51000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 999013
Samy's Part #: MATT999013

The Matthews 24x36" Lighting Control Kit includes 24x36" Single Scrim (Black), 24x36" Double Scrim, 24x36" Artificial Silk, 24x36" Flag, 24x36" Cello Cucoloris, 24x36" Wood Cucoloris and Carrying Bag. Lighting Control Carrying Bag is made of 1000 denier polyester fabric exterior shell with heavy...
$65280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 169062
Samy's Part #: MATT169062

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: On Backorder
$4335
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 999027
Samy's Part #: MATT999027

Matthews Studio Equipment presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter ROADFLAGS offers larger surfaced, (4' x 4' - 122cm x 122cm) lighting modification in a convenient, easy-to-use protable kit. The...
$68000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 350596
Samy's Part #: MATT350596

Matthews Road Rags are portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. The elastic corded frames easily fold for storing and transporting. A simple...
Availability: On Backorder
$40120
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 169004
Samy's Part #: MATT169004

Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just...
Availability: In Stock
$6290
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: L20005120
Samy's Part #: ARRI531651

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

Arri makes four different types of scrims.

Full single- this scrim covers the entire lightface and reduces the intensity of the entire light beam.

Full double - this scrim...
Availability: In Stock
$1360
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 149545
Samy's Part #: MATT149545

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
$3570
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 159013
Samy's Part #: MATT159013

Please Note: This item ships freight only

To keep weight to a minimum and yet get maximum strength, the Matthews 48x48 In. Solid Frame Scrim (Black Single) is made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize reflections. All Matthews...
$11475
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 319403
Samy's Part #: MATT319403
Availability: In Stock
$13175
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 309084
Samy's Part #: MATT309084
Availability: In Stock
$10710
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 0156
Samy's Part #: LOWE0156

Clear, single and double screen areas gradually reduce light intensity. Compensates for light fall-off on walls and subjects. Rotates 360 degree.
$1739
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 999003
Samy's Part #: S-000723

This Matthews Dot & Finger Survival Kit is a comprehensive kit able to solve almost any field or studio problem to Shape, soften or diminish the light from your fixtures. The Dot & Finger Survival Kit contains: 2--Dot 3 In. Single Black, 2--Dot 6 In. Single Black, 2--Dot 10 In. Single Black, 2--Dot...
$83725
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 169029
Samy's Part #: S-003451

Cutters are square or rectangular frames with mounting pins attached used to control natural or artificial light. The Matthews 24x72 In. Floppy Cutter is used to keep away flash light from the camera lens or to control spill light coming from other sources and to keep light from reaching certain...
$14875
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: L20005105
Samy's Part #: ARRI531252

This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
Availability: In Stock
$2210
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]