CONTACT US AT 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$3199
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SMBND
Samy's Part #: S-013647

These Rode Silicone Replacement Bands are used for replacing worn or damaged bands on the Rode SM3, SM4 and SM5 shockmounts.
Availability: In Stock
$500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: WS6
Samy's Part #: RODMWS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:...
Availability: In Stock
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: Z-FSO-M
Samy's Part #: KTEKZFSOM

The K-Tek Zeppelin Slip-On Windscreen (Medium) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PG2-R
Samy's Part #: S-048962

The Rode Microphones SM4-R Suspension Shockmount is a perfect Pistol Grip Shock Mount designed to reduce handling noise when recording with shotgun microphones in hand held or boompole mounted applications. The PG2-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any...
Availability: In Stock
$7900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 065101
Samy's Part #: S-047525

Rycote understands that capturing high-quality audio with lavalier microphones can be an art-form depending on the needs of the application. That is why we have designed a line of products for lavaliers using our signature wind and noise protection for the best possible audio in various low-profile...
Availability: In Stock
$1295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MZW400
Samy's Part #: SENNMZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
$3895
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: INVISILAV10PK
Samy's Part #: S-030629

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$4000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MICON1
Samy's Part #: S-014707

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems.
The MICON-1 is designed to connect to the Sennheiser receivers SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport.
Availability: In Stock
$1800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MZH600
Samy's Part #: S-035521

For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively. The Sennheiser MZH 600 Windshield is an accessory for the MKE 600 shotgun mic. The MZH 600 Windshield features a combination of foam and faux fur that diffuses wind noise during outdoor...
Availability: In Stock
$6995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: WMS-PRO + I
Samy's Part #: S-034183

Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhone®...
Availability: In Stock
$18500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KBLT52B
Samy's Part #: S-047515

The K-Tek KBLT52B Boom Pole Case (Large) is a three sided case with a semi-hard clam-shell design with zippers and a removable inside pouch. This new boom pole case is made using a three-layer lamination process for extreme strength to weight ratio. The external black fabric is a rip-stop nylon....
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 528117
Samy's Part #: S-010523

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1033
Samy's Part #: S-031772

The Calrad Collapsible Microphone 3 Leg Stand is polished chrome plated or black finish stem with 3/8 inches - 16 thread connector and a detachable 5/8" - 27 screw adapter for microphone holder. 3 leg base with fold able tubular legs. Boom sets accessories included with stand for greater adjustment...
Availability: In Stock
$5999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MINIBOOMPOLE
Samy's Part #: RODMMINIBOOM

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.

  • lightweight aluminium con

...
Availability: In Stock
$12900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KMICF
Samy's Part #: S-051473

The K-Tek KMICF Mic Flag (Square, Black) is a square microphone ID flag that fits any handheld, ENG microphone. It is ready to receive adhesive logos and other branding on four surfaces, each 2.5" x 2.5" (6.35cm x 6.35cm). The black Mic Flag comes with two foam inserts for optimized hold on all...
Availability: In Stock
$1425
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3013
Samy's Part #: S-021087

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: On Backorder
$4945
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: AT8415
Samy's Part #: AUDI8415

Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts Lightweight, low-profile design is ideal for "fishpole" booms and video use Equally adapted to cylindrical and tapered microphones Features a constant-tension clutch and 360 degree rotation Compatible with 3/8"-16...
Availability: In Stock
$5900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PSCSHOCKMOUNT
Samy's Part #: PSCPFPSC0035D

Designed to provide stable and noise free handling for a wide variety of microphones. These shock mounts feature a compact, concise design. They are constructed of lightweight aircraft aluminum and have a non-reflective black anodize finish. The two suspension bands are custom made to our own...
Availability: In Stock
$7995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3068
Samy's Part #: S-021105

Already own one of the Dinkum Systems CINE or PRO lens shades? Make your device do double duty with a Dinkum Systems ActionPod Top 3/8-16 in. Threaded Stud simply pop the metal flag off the end of your shade, add the top and gain an extra camera or mic mount. Own one of the Pro Pack kits? Throw this extra...
Availability: In Stock
$1345
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: VAMPIRECLIP
Samy's Part #: S-015364

The Rode Vampire Clip is a double-toothed clothing pin that conveniently fastens the R
Availability: In Stock
$1099
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BK1G
Samy's Part #: PSCPBK1G

Purpose designed to fit with mini mics/lapel mics including the Sanken Cos 11 and Tram to name but a few. As with all windsocks an area of air needs to be created so it's recommended they are used in conjunction with your factory style foam windsock or in the case of the Sanken or similar the...
Availability: In Stock
$1000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KLTFG
Samy's Part #: S-047518

The K-Tek Fuzzy Topper Windscreen for Lavalier Microphones (Grey) is a faux-fur lavalier windscreen used to protect the microphone against the noise by high wind and to produce optimum results. The windscreen is universal sized to fit most of the models and is ideal in speech capturing outdoors.

...
Availability: In Stock
$1900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SMWSFG
Samy's Part #: S-032365

The MyMyk Windshield for SmartMyk Microphone is a slip-on, open-cell, reticulated foam with an integral fur cover that provides excellent wind protection whilst safeguarding your SmartMyk in the most difficult of conditions. SmartMyk Windshield successfully reduces wind noise by up to 20dB without...
Availability: In Stock
$6600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KHG
Samy's Part #: KTEKKHG

The K-Tek Foam Lined Hand Grip with Boom Pole Head (6 In.) is a deluxe Pistol Grip for use with Shockmounts offering a boompole head and 3/8" threading for attachment. The foam covered graphite design offers both minimal weight and maximize handling isolation with considerable noise reduction....
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SMIS0030H
Samy's Part #: PSCPSMIS0030H

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: CLIP1
Samy's Part #: S-015359

The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user.
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: INVISILAV3PK
Samy's Part #: S-030628

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SM3
Samy's Part #: RODMSM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MICON3
Samy's Part #: S-014709

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to the following Shure receivers: UR1, UR1M, ULX1, SLX1, PGX1, PG1.
Availability: In Stock
$2300
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE79CC
Samy's Part #: KTEKKE79CC

This K-Tek Traveler Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 1.8 feet (51cm) and an extended length of 6.7 feet (201cm) with only weight of 1.452 lbs (659g). This 6-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread...
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]