CONTACT US AT 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WSVM
Samy's Part #: RODMWSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SG200
Samy's Part #: WINDSG200

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.
Availability: In Stock
$1200
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 528117
Samy's Part #: S-010523

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: In Stock
$995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: LAVCLIP
Samy's Part #: S-015363

The LAV-CLIP is an ergonomic and discreet clip mount for the Rode Lavalier microphone.
Availability: In Stock
$2499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$3199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMICF
Samy's Part #: S-051473

The K-Tek KMICF Mic Flag (Square, Black) is a square microphone ID flag that fits any handheld, ENG microphone. It is ready to receive adhesive logos and other branding on four surfaces, each 2.5" x 2.5" (6.35cm x 6.35cm). The black Mic Flag comes with two foam inserts for optimized hold on all...
Availability: In Stock
$1425
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 506219
Samy's Part #: S-052803

The Sennheiser CHG 2 2-Bay Table Top Charger for Sennheiser Wireless D1 Series makes battery management really easy. The mobile transmitters, while not in use, are charged in the two charging bays. Thus, the devices are always ready-to-use when needed. The bi-color LED provides the status (charging...
Availability: In Stock
$19995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW2EW
Samy's Part #: SENNMZW2EW
Availability: On Backorder
$1295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KLTFG
Samy's Part #: S-047518

The K-Tek Fuzzy Topper Windscreen for Lavalier Microphones (Grey) is a faux-fur lavalier windscreen used to protect the microphone against the noise by high wind and to produce optimum results. The windscreen is universal sized to fit most of the models and is ideal in speech capturing outdoors.

...
Availability: In Stock
$1900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SMIS0030F
Samy's Part #: PSCPSMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZQ800
Samy's Part #: SENNMZQ800

The Sennheiser MZQ800 is a Universal Evolution handheld microphone clip.
Availability: In Stock
$1395
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1097BK
Samy's Part #: S-034575

The Calrad Lavalier Clasp-type Microphone Holder is a Tie Clip microphone holder that fits 7/32 inches diameter microphones.

Lavalier Clasp-type Microphone Holders are used for hand free performance.
Availability: On Backorder
$599
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: On Backorder
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM3
Samy's Part #: RODMSM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: INVISILAV3PK
Samy's Part #: S-030628

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WMS-PRO + I
Samy's Part #: S-034183

Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhone®...
Availability: In Stock
$18500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MINIFURLAV
Samy's Part #: S-015370

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: In Stock
$2499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MINIBOOMPOLE
Samy's Part #: RODMMINIBOOM

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.

  • lightweight aluminium con

...
Availability: In Stock
$12900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KE110CCR
Samy's Part #: KTEKKE110CCR

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KE110
Samy's Part #: KTEKKE110

This K-Tek Avalon Series Aluminum Boompole (Uncabled) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.458 lbs (661g). This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ - 16 male thread and the bottom attachment...
Availability: In Stock
$19950
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: CLIP1
Samy's Part #: S-015359

The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user.
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM4-R
Samy's Part #: S-048961

The Rode Microphones SM4-R Suspension Shockmount is a perfect suspension shock mount for mounting various RØDE microphones onto a mic stand or boompole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 065103
Samy's Part #: S-047527

Rycote understands that capturing high-quality audio with lavalier microphones can be an art-form depending on the needs of the application. That is why we have designed a line of products for lavaliers using our signature wind and noise protection for the best possible audio in various low-profile...
Availability: In Stock
$1295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KTH1
Samy's Part #: S-011553

The K-Tek Microphone Windscreen Topper for Zoom H1 is designed to reduce wind noise and vocal plosives for clear recordings overcome the noise which is created when moving your H1 recorder. Also provides some protection against rain and dust, the topper is made of synthetic black short-hair fur.

...
Availability: In Stock
$2850
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1033
Samy's Part #: S-031772

The Calrad Collapsible Microphone 3 Leg Stand is polished chrome plated or black finish stem with 3/8 inches - 16 thread connector and a detachable 5/8" - 27 screw adapter for microphone holder. 3 leg base with fold able tubular legs. Boom sets accessories included with stand for greater adjustment...
Availability: In Stock
$5999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: CCMINI
Samy's Part #: S-043815

The Lectrosonics Zippered Carrying Case for Compact Wireless Microphone Systems is a vinyl case made to carry compact wireless microphone systems. It has 2 Interior compartments. The bag is made of high quality material for long life and can accommodate the wireless microphone system for trans...
Availability: In Stock
$2300
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMT
Samy's Part #: S-024219

The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Availability: In Stock
$7600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: PG2-R
Samy's Part #: S-048962

The Rode Microphones SM4-R Suspension Shockmount is a perfect Pistol Grip Shock Mount designed to reduce handling noise when recording with shotgun microphones in hand held or boompole mounted applications. The PG2-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any...
Availability: In Stock
$7900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3013
Samy's Part #: S-021087

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: On Backorder
$4945
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 037303
Samy's Part #: RYCO037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: In Stock
$2795
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]