CONTACT US AT 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: On Backorder
$3199
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: INVISILAV10PK
Samy's Part #: S-030629

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$4000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTZOOMH5
Samy's Part #: S-047530

The K-Tek Microphone Windscreen Topper for Zoom H5 is made of high-grade synthetic black short hair fur and it is designed for Zoom H5 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder microphone...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE110CCR
Samy's Part #: KTEKKE110CCR

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE110
Samy's Part #: KTEKKE110

This K-Tek Avalon Series Aluminum Boompole (Uncabled) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.458 lbs (661g). This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ - 16 male thread and the bottom attachment...
Availability: In Stock
$19950
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SM4-R
Samy's Part #: S-048961

The Rode Microphones SM4-R Suspension Shockmount is a perfect suspension shock mount for mounting various RØDE microphones onto a mic stand or boompole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible...
Availability: In Stock
$4900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KBLT52B
Samy's Part #: S-047515

The K-Tek KBLT52B Boom Pole Case (Large) is a three sided case with a semi-hard clam-shell design with zippers and a removable inside pouch. This new boom pole case is made using a three-layer lamination process for extreme strength to weight ratio. The external black fabric is a rip-stop nylon....
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RB101
Samy's Part #: S-023439

The Riggy Cold Shoe Attachment by its manufacturer JuicedLink. The RB101 is a SINGLE cold shoe attachment that can be mounted to the Riggy receptacles located on either the top or side of the Riggy-Micro series of preamps (not for the Riggy-Assist series of preamps). The Riggy-Micro preamps are so...
Availability: On Backorder
$2500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: On Backorder
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SM3
Samy's Part #: RODMSM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 065101
Samy's Part #: S-047525

Rycote understands that capturing high-quality audio with lavalier microphones can be an art-form depending on the needs of the application. That is why we have designed a line of products for lavaliers using our signature wind and noise protection for the best possible audio in various low-profile...
Availability: On Backorder
$1295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE79CC
Samy's Part #: KTEKKE79CC

This K-Tek Traveler Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 1.8 feet (51cm) and an extended length of 6.7 feet (201cm) with only weight of 1.452 lbs (659g). This 6-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread...
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PSCSHOCKMOUNT
Samy's Part #: PSCPFPSC0035D

Designed to provide stable and noise free handling for a wide variety of microphones. These shock mounts feature a compact, concise design. They are constructed of lightweight aircraft aluminum and have a non-reflective black anodize finish. The two suspension bands are custom made to our own...
Availability: In Stock
$7995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: AT8415
Samy's Part #: AUDI8415

Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts Lightweight, low-profile design is ideal for "fishpole" booms and video use Equally adapted to cylindrical and tapered microphones Features a constant-tension clutch and 360 degree rotation Compatible with 3/8"-16...
Availability: In Stock
$5900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: INVISILAV3PK
Samy's Part #: S-030628

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SMBND
Samy's Part #: S-013647

These Rode Silicone Replacement Bands are used for replacing worn or damaged bands on the Rode SM3, SM4 and SM5 shockmounts.
Availability: In Stock
$500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MINIBOOMPOLE
Samy's Part #: RODMMINIBOOM

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.

  • lightweight aluminium con

...
Availability: In Stock
$12900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 528117
Samy's Part #: S-010523

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PG2-R
Samy's Part #: S-048962

The Rode Microphones SM4-R Suspension Shockmount is a perfect Pistol Grip Shock Mount designed to reduce handling noise when recording with shotgun microphones in hand held or boompole mounted applications. The PG2-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any...
Availability: In Stock
$7900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTZOOMH6XY
Samy's Part #: S-047531

The K-Tek Microphone Windscreen Topper for Zoom H6 XY Capsule is made of high-grade synthetic black short hair fur and it is designed for Zoom H6 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 037303
Samy's Part #: RYCO037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: AT831125
Samy's Part #: AUDIAT831125

The Audio-Technica 1/4 In. T/S Male to 3-pin XLR Female Microphone 25 ft. Cables are engineered to deliver outstanding value and reliable, durable performance. An economical introduction to Audio-Technica cable quality.

Features:
  • Copper outer shield and dual conductive PVC inner shields protect
...
Availability: In Stock
$979
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MZW400
Samy's Part #: SENNMZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
$3895
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: WS6
Samy's Part #: RODMWS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:...
Availability: In Stock
$5900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: WMS-PRO + I
Samy's Part #: S-034183

Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhone®...
Availability: In Stock
$18500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SMIS0030F
Samy's Part #: PSCPSMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SG200
Samy's Part #: WINDSG200

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.
Availability: In Stock
$1200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KHG
Samy's Part #: KTEKKHG

The K-Tek Foam Lined Hand Grip with Boom Pole Head (6 In.) is a deluxe Pistol Grip for use with Shockmounts offering a boompole head and 3/8" threading for attachment. The foam covered graphite design offers both minimal weight and maximize handling isolation with considerable noise reduction....
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KCAMSSM
Samy's Part #: KTEKKCAMSSM

The K-Tek Camera Shoemounting Shock Mount for Sanken CS-1 is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb vibration...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: LAVCLIP
Samy's Part #: S-015363

The LAV-CLIP is an ergonomic and discreet clip mount for the Rode Lavalier microphone.
Availability: In Stock
$2499
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]