CONTACT US AT 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM3
Samy's Part #: RODMSM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RB200
Samy's Part #: S-023440

The Riggy Cold Shoe Top Mounting Kit by its manufacturer JuicedLink, is an entire kit with everything you need to mount your Riggy-Micro to the hot-shoe of your camera (not designed for the Riggy-Assist). It inlcludes 2 RB101 cold shoe mounts which attach to the Riggy receptacles on the top and...
Availability: On Backorder
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: INVISILAV10PK
Samy's Part #: S-030629

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$4000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICON1
Samy's Part #: S-014707

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems.
The MICON-1 is designed to connect to the Sennheiser receivers SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport.
Availability: In Stock
$1800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW60-1
Samy's Part #: S-033518

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
$32995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: WSHS1P
Samy's Part #: S-015372

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of three.
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KTH1
Samy's Part #: S-011553

The K-Tek Microphone Windscreen Topper for Zoom H1 is designed to reduce wind noise and vocal plosives for clear recordings overcome the noise which is created when moving your H1 recorder. Also provides some protection against rain and dust, the topper is made of synthetic black short-hair fur.

...
Availability: In Stock
$2850
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMT
Samy's Part #: S-024219

The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Availability: In Stock
$7600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KLTFG
Samy's Part #: S-047518

The K-Tek Fuzzy Topper Windscreen for Lavalier Microphones (Grey) is a faux-fur lavalier windscreen used to protect the microphone against the noise by high wind and to produce optimum results. The windscreen is universal sized to fit most of the models and is ideal in speech capturing outdoors.

...
Availability: In Stock
$1900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW4EW
Samy's Part #: SENNMZW4EW

MZW-4EW Evolution Wireless Foam windscreen for ME4 Lavalier Microphone.
Availability: On Backorder
$925
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICON3
Samy's Part #: S-014709

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to the following Shure receivers: UR1, UR1M, ULX1, SLX1, PGX1, PG1.
$2300
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: DEADWOMBAT
Samy's Part #: S-015369

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 173B
Samy's Part #: MANF173B

This Manfrotto Mini-Boom Arm it has a 20mm diameter, is manufactured of aluminum and features a black finish. It has a length just under 43". It is also lightweight at only .71 lbs.

Features:
  • Diameter: 20mm 
  • color: black color
  • length: 42.91 in
  • material: aluminum 
...
$2088
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WSVM
Samy's Part #: RODMWSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: On Backorder
$29900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SG200
Samy's Part #: WINDSG200

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.
Availability: In Stock
$1200
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 528117
Samy's Part #: S-010523

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: In Stock
$675
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 16067
Samy's Part #: S-046864

The Leica AA-SCL4 Audio Adapter provides 3.5 mm jack sockets for headphones and a remote microphone. Using a single dedicated connection to the camera, this adapter enables the use of both headphones and an external microphone via 3.5mm jack sockets.

Features:
  • Provides 3.5 mm jack sockets for
...
$17500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: A182
Samy's Part #: S-014728

The Sennheiser A181 is a replacement antenna for Evolution series wireless body-pack transmitters and receivers. This antenna is compatible with components assigned to frequency group "B".
$1295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: LAVCLIP
Samy's Part #: S-015363

The LAV-CLIP is an ergonomic and discreet clip mount for the Rode Lavalier microphone.
Availability: In Stock
$2499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$3199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMICF
Samy's Part #: S-051473

The K-Tek KMICF Mic Flag (Square, Black) is a square microphone ID flag that fits any handheld, ENG microphone. It is ready to receive adhesive logos and other branding on four surfaces, each 2.5" x 2.5" (6.35cm x 6.35cm). The black Mic Flag comes with two foam inserts for optimized hold on all...
Availability: In Stock
$1425
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WS5
Samy's Part #: S-015377

Rode WS5 Windscreen is built to fit the NT5 microphone. Properly equip your microphone with the WS5 to avoid wind noise and pop. The WS5 Windscreen is designed to fit If you have a Rode NT5  microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
$1999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 506219
Samy's Part #: S-052803

The Sennheiser CHG 2 2-Bay Table Top Charger for Sennheiser Wireless D1 Series makes battery management really easy. The mobile transmitters, while not in use, are charged in the two charging bays. Thus, the devices are always ready-to-use when needed. The bi-color LED provides the status (charging...
Availability: In Stock
$21995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW2EW
Samy's Part #: SENNMZW2EW
Availability: On Backorder
$925
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SMIS0030F
Samy's Part #: PSCPSMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM6
Samy's Part #: S-030819

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RĂ˜DE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: MZQ800
Samy's Part #: SENNMZQ800

The Sennheiser MZQ800 is a Universal Evolution handheld microphone clip.
Availability: In Stock
$1395
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1097BK
Samy's Part #: S-034575

The Calrad Lavalier Clasp-type Microphone Holder is a Tie Clip microphone holder that fits 7/32 inches diameter microphones.

Lavalier Clasp-type Microphone Holders are used for hand free performance.
Availability: On Backorder
$599
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]