CONTACT US AT 800-321-4726
Microphone Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: BOOMPOLE
Samy's Part #: S-029225

The Rode Microphones Boompole for Rode NTG-1, NTG-2 and Video Mic (10 ft.) is a precision balanced professional boom pole to mount microphones during location recording. It is machined from high grade, lightweight aluminium for extra strength and durability with lightweight features. The Boompole...
Availability: In Stock
$14900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 173B
Samy's Part #: MANF173B

This Manfrotto Mini-Boom Arm it has a 20mm diameter, is manufactured of aluminum and features a black finish. It has a length just under 43". It is also lightweight at only .71 lbs.

Features:
  • Diameter: 20mm 
  • color: black color
  • length: 42.91 in
  • material: aluminum 
...
$2088
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SMWSFG
Samy's Part #: S-032365

The MyMyk Windshield for SmartMyk Microphone is a slip-on, open-cell, reticulated foam with an integral fur cover that provides excellent wind protection whilst safeguarding your SmartMyk in the most difficult of conditions. SmartMyk Windshield successfully reduces wind noise by up to 20dB without...
Availability: In Stock
$6600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 10-39
Samy's Part #: S-034576

The Calrad Stereo Audio Output and Microphone Input Via USB is a Plug and Play, USB 2.0, Stereo 5.1 channel sound effects, Virtual speaker shifter, Speaker/headphone jack, Microphone jack, Transform analog sound signals to digital.

Features:
  • USB 2.0 Plug & Play
  • Drives 2 CH Speakers Directly
...
Availability: In Stock
$299
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$3199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM4-R
Samy's Part #: S-048961

The Rode Microphones SM4-R Suspension Shockmount is a perfect suspension shock mount for mounting various RĂ˜DE microphones onto a mic stand or boompole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KMTS
Samy's Part #: S-047516

The K-Tek K-Mount Microphone Shock Mount Suspension System (Short Version) offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. This KMTS is the short version designed...
Availability: In Stock
$7600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SMIS0030F
Samy's Part #: PSCPSMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: INVISILAV3PK
Samy's Part #: S-030628

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICON2
Samy's Part #: S-014708

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.
The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.
Availability: In Stock
$1800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KZFCL
Samy's Part #: KTEKKZFCL

The K-Tek Fleece Microfiber Cover for Medium Zeppelin (Long) is a simple and effective windscreen for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most shotgun m...
$3000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: MZW400
Samy's Part #: SENNMZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
$3995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KE79CCR
Samy's Part #: S-031220

The K-Tek KE79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled) has a collapsed length of 1'8″/51cm and an extended length of 6'7″/201cm and only weighs 1.45lbs/658g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: KE79CC
Samy's Part #: KTEKKE79CC

This K-Tek Traveler Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 1.8 feet (51cm) and an extended length of 6.7 feet (201cm) with only weight of 1.452 lbs (659g). This 6-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread...
Availability: In Stock
$23275
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SKP100G3
Samy's Part #: S-002592

The Sennheiser SKP 100 G3 Plug-on Transmitter for Dynamic Microphones (516 - 558MHz) easily plugs onto microphones with XLR connections transforming them into world-class wireless units when combined with EM 100 G3 or EK 100 G3 receivers. This compact and lightweight transmitter has a run-time...
$29995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KE110CCR
Samy's Part #: KTEKKE110CCR

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: LAVCLIP
Samy's Part #: S-015363

The LAV-CLIP is an ergonomic and discreet clip mount for the Rode Lavalier microphone.
Availability: In Stock
$2499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SM3
Samy's Part #: RODMSM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RB200
Samy's Part #: S-023440

The Riggy Cold Shoe Top Mounting Kit by its manufacturer JuicedLink, is an entire kit with everything you need to mount your Riggy-Micro to the hot-shoe of your camera (not designed for the Riggy-Assist). It inlcludes 2 RB101 cold shoe mounts which attach to the Riggy receptacles on the top and...
Availability: On Backorder
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: INVISILAV10PK
Samy's Part #: S-030629

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: On Backorder
$4000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICON1
Samy's Part #: S-014707

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems.
The MICON-1 is designed to connect to the Sennheiser receivers SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport.
Availability: In Stock
$1800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MZW60-1
Samy's Part #: S-033518

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
$32995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: WSHS1P
Samy's Part #: S-015372

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of three.
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KTH1
Samy's Part #: S-011553

The K-Tek Microphone Windscreen Topper for Zoom H1 is designed to reduce wind noise and vocal plosives for clear recordings overcome the noise which is created when moving your H1 recorder. Also provides some protection against rain and dust, the topper is made of synthetic black short-hair fur.

...
$2850
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KMT
Samy's Part #: S-024219

The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Availability: In Stock
$7600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KLTFG
Samy's Part #: S-047518

The K-Tek Fuzzy Topper Windscreen for Lavalier Microphones (Grey) is a faux-fur lavalier windscreen used to protect the microphone against the noise by high wind and to produce optimum results. The windscreen is universal sized to fit most of the models and is ideal in speech capturing outdoors.

...
Availability: In Stock
$1900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: MICON3
Samy's Part #: S-014709

The Rode MiCon connector system provides seamless integration between the Rode HS1 headset and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to the following Shure receivers: UR1, UR1M, ULX1, SLX1, PGX1, PG1.
$2300
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: DEADWOMBAT
Samy's Part #: S-015369

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: WSVM
Samy's Part #: RODMWSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]