CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: On Backorder
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 186
Samy's Part #: MANF186

Manfrotto adapter 3/8" Female to 5/8" Male Stud and is 50mm Long.

* Replaces item # 3357
Availability: On Backorder
$612
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3110
Samy's Part #: S-001564

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B387486
Samy's Part #: MATTB387486

The Matthews Reverse Stand is best suited for location work, since it can fold back on itself into a very compact package only 22.75" (58 cm) long. It has four risers, and its maximum height is 83.5" (2.1 m).

It can accommodate 11 lbs (5 kg) at maximum height.
Availability: In Stock
$7200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
$4990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427802
Samy's Part #: MATT427802

The Matthews Mini Boom is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a sandbag...
Availability: In Stock
$16320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: A2030DKIT
Samy's Part #: S-001817

This stand features a detachable "turtle" base that is easily removed to facilitate transportation. A light head can be mounted to the base directly with the aid of a stand adapter. The innovative design on the Century Stand base allows individual legs to be set at any angle, and can be positioned...
Availability: In Stock
$21588
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756120
Samy's Part #: MATTB756120

Matthews C-Stand with Turtle Base, includes Grip Head and Arm, non-spring loaded base.
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 420110
Samy's Part #: MATT420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0390P
Samy's Part #: S-014910

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG601612
Samy's Part #: S-015133

A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an "ear" that is d...
Availability: In Stock
$9450
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MS0490A
Samy's Part #: S-031862

The Manfrotto Nanopole Stand is a new lightweight stand, with a payload of 1,5Kg and outstanding stability. It's a two-in-one product: the central column is detachable and easily turns into a hand held boom. To detach the pole from the stand it's easy and fast: simply press the button with the...
Availability: In Stock
$7999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 03614
Samy's Part #: MANF03614

The Manfrotto 036-14 Standard Stud features a standard 1/4"-20 screw on one end, and snaps into a Super Clamp socket on the other end. Use it to mount cameras, directly or with a camera head. Replaces old #2908.
Availability: In Stock
$475
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YLSC2400T
Samy's Part #: S-034603

The Phototools Light Stand with Leveling Leg is a four section light stand with a leveling leg that extends to provide secure support of lighting equipment on uneven surfaces like stairs and other terrain.

The stand extends to a maximum height of 8.2' and has a 5/8" Baby top stud.
Availability: On Backorder
$7999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3139P
Samy's Part #: S-023356

The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: On Backorder
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Availability: On Backorder
$7699
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: A10
Samy's Part #: S-038452

The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: In Stock
$4900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 042
Samy's Part #: MANF042
Fits into Super Clamp 035 socket.
Availability: In Stock
$1699
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9.VD5089L
Samy's Part #: S-049527

The 9.SOLUTIONS Double Joint Arm (Long, 660mm) Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8 In. pin with a 3/8 In.-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety...
Availability: In Stock
$8999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 25LBAWF
Samy's Part #: S-045682

The STUFFT Fly-A-Way Sandbag (Max 25 lbs.) is used to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty poly
...
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756020
Samy's Part #: MATTB756020

Features a sliding leg making it usable on uneven place flags, color gels, bounce cards, and silks in front of light sources to block, direct, or modify the light. It can also be used to mount lights or rig anything that will fit on the stand.
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427000
Samy's Part #: MATT427000

Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Availability: In Stock
$9280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 025BS
Samy's Part #: MANF025BS

The Manfrotto 025BS Super Boom features coaxial geared controls at the end of the boom, which permits movement of 180 degree. The 008BU (a.k.a 3071B) two section stand has black painted aluminum construction, with wheels. The stand section supports light fixture loads up to 66 lbs (30kg), to a...
Availability: On Backorder
$65099
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: B6040X
Samy's Part #: S-039036

The Avenger Super Wind-up 40 Stand with Braked Wheels (12.6 ft.) is a heavy lift stand with strengthened stainless steel column and legs, chrome steel risers and geared column. 3 section, 2 risers which extended simultaneously at 4.4cm per handle turn. Safety cable ensures simultaneous retrieval...
Availability: In Stock
$1,27888
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 244MICRO
Samy's Part #: S-052325

This Manfrotto 244 Micro Friction Arm is both clever and versatile - thanks to its interchangeable 1/4'' Attachments and a 3/8'' Adapter. It is also strong and easy to use - designed to complement a full range of adapters. Which means that you will be able to mix and match and always get the exact kit and setup you need...
Availability: On Backorder
$8999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: H386020
Samy's Part #: MATTH386020

The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
Availability: On Backorder
$28560
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1052BAC
Samy's Part #: S-006185

Lightweight and strong, the 93" Alu Air Cushioned Compact Stand - Black is the portable solution for on-the-go photographers. Its reliable aluminium body will keep your camera or lighting in place so you can capture that perfect shot while knowing that your equipment is secure.

Featuring an i

...
Availability: On Backorder
$8399
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DL4001P
Samy's Part #: S-024781

The new, economical Dot Line Corp. Table Top Tripod Clamp Combo is a composite material clamp that features locking metal legs that fold up out of the way when not in use. The feet of the legs are a composite material to help protect surfaces. The ball head rotates 360° and tilts 90°. The jaw...
Availability: On Backorder
$1195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PD05020
Samy's Part #: KALTPD05020

For mounting a camera, or small light fixture that has a 1/4-20 inch screw threaded bottom. The Ultra Clamp Assembly locks and tightens to any side car window, shelf or arm up to 1-1/2 inch thickness. Includes a locking 2 way swivel/tilt head.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 299552
Samy's Part #: S-004124

Sandbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, for hanging on hooks or risers. Some have two wings, to allow draping over light stand legs.
Availability: In Stock
$3695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 10LBRH
Samy's Part #: S-043030

The STUFFT Sandbag 10 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
Availability: In Stock
$2295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429232
Samy's Part #: MATT429232

90 degree pin / receiver. Weighs .9 pounds.
Availability: On Backorder
$3095
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]