CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DL0390P
Samy's Part #: S-014910

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: On Backorder
$4990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 249561
Samy's Part #: S-041936

The Matthews The Slider Stand (3.8 ft.) meets the demand for a strong, wide-based stand with a low working height for those using camera sliders and Speed Rail/Pipe Dolly Systems. Baby Ballhead Adapter, Magic Finger and Stand/Spud Adapter sold separately. The Slider Stand comes standard with two...
Availability: In Stock
$28160
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 01414
Samy's Part #: MANF01414

The Manfrotto 01414 Rapid Adapter fits any light stand with a 5/8" top stud. It will allow vertical or horizontal mounting of a light fixture, flash, or camera that has a 1/4-20" thread.

Replaces item # 3105
Availability: In Stock
$944
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1100
Samy's Part #: DOTLRS1100

Medium weight stand for strobes and lampheads Features flip type positive locking levers to secure each section.
Availability: On Backorder
$4595
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 35LBRH
Samy's Part #: S-043033

The STUFFT Sandbag 35 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
Availability: In Stock
$3695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MS0490A
Samy's Part #: S-031862

The Manfrotto Nanopole Stand is a new lightweight stand, with a payload of 1,5Kg and outstanding stability. It's a two-in-one product: the central column is detachable and easily turns into a hand held boom. To detach the pole from the stand it's easy and fast: simply press the button with the...
Availability: In Stock
$7999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B427080
Samy's Part #: S-024499

The Matthews Maxi Matthpole Black (8-14.9 ft.) is stronger and more durable than any similar product. Unique "expanding casting" provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and...
Availability: In Stock
$14320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA051
Samy's Part #: S-034613

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350617
Samy's Part #: S-015212

The MicroClamp can grip to round or flat surfaces, as well as many other objects or shapes one may find on set. It's reduced size and dual 3/8" and ΒΌ" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an...
Availability: In Stock
$2320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3114
Samy's Part #: DOTLRS3114P

Converts 1/4"-20 male to 5/8" stud.
Availability: In Stock
$695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1058
Samy's Part #: S-004299

A lite weight stand for small strobes and light weight lampheads. Ideal for speedlites, photofloods, and smaller monolites.
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429678
Samy's Part #: S-008286

Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and out...
Availability: In Stock
$1520
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1100
Samy's Part #: WESC1100

Illuminator Arm, has a double ball-joint for exact positioning. The clip mechanism firmly grips the product frame and fits on any stand with a standard fitting.
Availability: In Stock
$7340
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9.VD5089L
Samy's Part #: S-049527

The 9.SOLUTIONS Double Joint Arm (Long, 660mm) Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8 In. pin with a 3/8 In.-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety...
Availability: In Stock
$8999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 209632
Samy's Part #: MATT209632

Snap in Pins for mounting of lighting fixtures. These 5/8" pins fit most motion picture and still photographic instruments.
Availability: On Backorder
$650
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3810
Samy's Part #: S-046463

The Chimera Compact Light Boom is used to quickly and easily position overhead lights with softboxes. It operates like a small jib arm thus providing 32 inches of reach with 360 degrees rotating head extension for angular adjustment. Special single handle is attached on the head extension to control...
Availability: In Stock
$48500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KS041611
Samy's Part #: S-043585

The Kupo Mini Click Stand (7 ft.) is designed for studio or location shooting. These light stands can easily be taken on location because of the clever and unique interlocking mechanism which allows you to carry them in different configurations. Features a clever interlocking mechanism that allows...
Availability: In Stock
$6999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 299552
Samy's Part #: S-004124

Sandbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, for hanging on hooks or risers. Some have two wings, to allow draping over light stand legs.
Availability: In Stock
$3695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756120
Samy's Part #: MATTB756120

Matthews C-Stand with Turtle Base, includes Grip Head and Arm, non-spring loaded base.
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 366066
Samy's Part #: S-014325

The Matthews Low Boy Double Riser Combo Steel Stand (6.3 ft.) features wider footprint and longer legs to provide increased stability. It rises up to maximum height of 6.3 feet and has Junior (1-1/8") receptor and a Baby (5/8") spigot. This stand comes complete with Rocky Mountain leg and steel...
Availability: In Stock
$25600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350602-10
Samy's Part #: S-041447

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F805
Samy's Part #: AVENF805

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: On Backorder
$1250
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B681013
Samy's Part #: S-033380

The Matthews 40 In. Hollywood Gobo Arm with Grip head features the strongest Grip Head in the industry. The grip guaranteed to hold firmly, just set it and forget, it will not let the arm to slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in...
Availability: In Stock
$5799
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 237HD
Samy's Part #: MANF237HD

A flexible Heavy Duty arm designed to be used with the super clamp system. Similar to the 2896 Flex Arm but with a larger diameter of .7". The Flexarm can hold light weight fixtures like a 150W Fresnel or props and be easily moved and held in place without having to lock any knobs.

Flexible arm, 1/2" diameter, 2...
Availability: In Stock
$3199
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG601612
Samy's Part #: S-015133

A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an "ear" that is d...
Availability: On Backorder
$9450
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1052BAC
Samy's Part #: S-006185

Lightweight and strong, the 93" Alu Air Cushioned Compact Stand - Black is the portable solution for on-the-go photographers. Its reliable aluminium body will keep your camera or lighting in place so you can capture that perfect shot while knowing that your equipment is secure.

Featuring an i

...
Availability: On Backorder
$8399
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: KG702811
Samy's Part #: S-039080

Kupo Super Claw is a small clamp with many great features! The new design allows for an increased payload over the former KUPO Pincer clamp and other clamps in the market. What separates this clamp from the competition is the fact that the pads are customer replaceable. Some companies use tape...
Availability: In Stock
$2500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B427802
Samy's Part #: MATTB427802

Designed because of the growing demand for a boom which would not bend when an array of accessories are added to small lighting fixtures or strobes such as light banks egg crates etc. Made completely out of steel the Mini Boom mounts on a 5/8" Baby Pin and will extend 7 feet terminating in a 5/8"...
Availability: In Stock
$16320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1150
Samy's Part #: S-004573

General purpose counterweight can be used with any light stand or boom. Includes "Hi-Vis" yellow stripes so it is easy to see in a darkened studio, prevents accidents. Sandbag has two pockets which can be filled with sand to produce the proper counterbalance effect (sand not included.) Also...
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]