CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: B756040
Samy's Part #: MATTB756040
Includes FREE 6 In. Pin with Collar
Includes Free
Total Value: $16.85
Availability: In Stock
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$18800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 5001B
Samy's Part #: MANF5001B

This Manfrotto 5001B Nano Retractable Compact Light Stand is perfect for supporting small light fixtures on location. The stand folds down to 19", which makes it easy to fit into a location case.
Availability: In Stock
$4988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Availability: In Stock
$7688
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9908
Samy's Part #: WESC9908

The Westcott Pro 8' Free Sliding Light Stand is constructed of lightweight  aluminum with a black anodized finish. It is durable and collapses for easy storage.
 
$3500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: RS3110
Samy's Part #: S-001564

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: On Backorder
$3795
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756040
Samy's Part #: MATT756040
Includes FREE 6 In. Pin with Collar
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B756020
Samy's Part #: MATTB756020

Features a sliding leg making it usable on uneven place flags, color gels, bounce cards, and silks in front of light sources to block, direct, or modify the light. It can also be used to mount lights or rig anything that will fit on the stand.
Availability: In Stock
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KG009112
Samy's Part #: S-045016

The Kupo Snap-In Right Angle Pin features a hex pin on one side for the Convi & Super Viser Clamp Systems and a baby stud for easy mounting of your lighting fixtures or accessories.

Features:
  • Made of high quality material for extra strength
  • Features a hex pin on one side for the Convi & Super
...
Availability: In Stock
$1895
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 339763
Samy's Part #: MATT339763

The Matthews Back Light Stand is configured so that accurate positioning of the back light may be achieved. Used for either background illumination or back lighting the subject. An extendable column allows for a wide range of heights and an interchangeable 5/8" pin positions the light almost...
Availability: On Backorder
$4850
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 260T
Samy's Part #: S-053069

The Godox Air-Cushioned Light Stand (8 ft.) is an ideal light stand for outdoor or indoor photography. The stand extends up to 8 feet, sure-twist section locks of 4 sections. The air-cushioned helps to lower down slowly that ensures the safety of light mounted.

Features:
  • Extends up to 8 feet
...
Availability: On Backorder
$2500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 339574
Samy's Part #: MATT339574

The Matthews 20 In.Century C Stand With Spring Loaded Base is a important component in the image maker's arsenal of tools. The Matthews 20" Century Double Riser stand assists the motion picture, television, and photographic professional in lighting. This 20" C stand features a spring loaded base,...
$14875
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 035
Samy's Part #: MANF035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: In Stock
$2688
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 387402
Samy's Part #: MATT387402

Designed primarily for use in lighting kits, this stand is compact and light weight. It is ideal for assembling custom lighting kits or as a replacement. This black finish aluminum stand has 3 riser sections. Many Matthews Revenger Stands employ a " Brake Shoe " system for locking off the riser tubes as...
Availability: On Backorder
$6800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 429066
Samy's Part #: S-016138

The Matthews Putty Knife with 5/8 In. Pin is another emergency kit gadget that allows the placement of a 5/8 In. pin in many unusual locations. Because of its strength and its very thin profile the Putty Knife can be slipped behind a door molding, window sill molding, the top of a closed door,
...
$1750
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 15LB
Samy's Part #: S-024743

The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty
...
Availability: On Backorder
$2395
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B387490
Samy's Part #: MATTB387490

Designed primarily for use in lighting kits, this stand is compact and light weight. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. This is a triple riser stand, for reaching a maximum height...
Availability: In Stock
$16080
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$18800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: A2033L
Samy's Part #: S-024229

The Avenger 10.75 ft. Chrome plated Sliding Leg C-Stand is three sections stand with two risers. The new design of the base gives control of the individual legs to be set at required angle allowing positioning in locations not possible with traditional stands. One of the legs slides along the...
$15799
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KS704211
Samy's Part #: S-033223

The Kupo 20 In. Master C Turtle Base Kit (Black) features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking...
$14495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: SHOTBAG10
Samy's Part #: S-033996

The STUFFT 10 lb Shot Bag is encapsulated in inner poly bag embroidered with "shot" and weight in pounds custom embroidery. The bag is used to stabilize light stands or set walls.
Availability: In Stock
$3495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 299853
Samy's Part #: MATT299853
Matthews uses steel shot instead of lead to fill these black Cordura bags.
$6960
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 196B2
Samy's Part #: MANF196B2

A more versatile version with telescopic features that make this product even more compact than before. Allows easier positioning of lighting fixtures even in awkward and tight spaces. (Replaces the 2935 Articulated Arm).

Maximum Length is 23.8 inches, and the bottom 5/8" spigot (compatible with...
$4588
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 429065
Samy's Part #: MATT429065

This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls they are also used as the worlds lowest stand by nailing to a floor or on an Apple Box. Other names include Baby Nail On 750 Pigeon or just Nail On Plate. MSE...
Availability: In Stock
$1699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: A2033F
Samy's Part #: S-003085

This Avenger A2033F Century C Stand is a favorite among professional photographers, film makers and videographers everywhere. It is durable, and designed to collapse flat for easy transport and storage. It rises to a maximum height of 10.75' (3.25 m). The leg design of Century Stands provides...
$15199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 304
Samy's Part #: S-053068

The Godox Light Stand (6.5 ft.) is designed for maximum support with minimum weight. It is perfect for professional studio photography, easy to set up, quick release and lock system fitted for the fast and easy uses. The light stand extends up to 6.5 ft. and folds down to 27.5 inches. It features...
Availability: In Stock
$1900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KG022311
Samy's Part #: S-053873

The Tethermate is a small, strong, and lightweight platform for the professional photographer who needs to shoot tethered. The Tethermate is a portable platform that features an adapter beneath the plate with two 5/8" (16mm) Baby Receivers 1/4" & 3/8"" female threads which can fit easily to stands,...
Availability: In Stock
$7750
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 417026
Samy's Part #: S-025427

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: In Stock
$5499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: FASOBO
Samy's Part #: FOBA310144

7lbs Counterweight for ASABA Camera Stand. Fits inside the column of the Foba ASABA Camera Stand. Makes height adjustment of larger cameras easier.
Availability: In Stock
$15680
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 299557
Samy's Part #: MATT299557

The Matthews 35 lb Cordura Sandbag (Black) is used for securing the base of light stand and set wall and when you need extra weight to prevent tipping. The sand bags become essential part of your setup especially when the weight is off center, such as with a heavy Scrim. The bags help stabilize...
$3200
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: H386020
Samy's Part #: MATTH386020

The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
Availability: On Backorder
$28560
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350605
Samy's Part #: S-006326

MICRO Shot Bag used to counterbalance weight in Matthews MICROgrip line of gear.
$1495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 299887
Samy's Part #: MATT299887

This versatile, stainless steel shot bag quickly wraps around the base of any stand column, brace, tee handle, arm or boom. By placing the weight directly below the weight of the fixture, the weight is actually directed straight down the stand's vertical column, holding it firmly in place. The...
Availability: In Stock
$4240
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DS-009
Samy's Part #: S-044532

The Savage Drop Stand Light Stand (9 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
Availability: In Stock
$8699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA051
Samy's Part #: S-034613

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: On Backorder
$499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]