CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: B756040
Samy's Part #: MATTB756040
Includes FREE 6 In. Pin with Collar
Includes Free
Total Value: $16.85
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756040
Samy's Part #: MATT756040
Includes FREE 6 In. Pin with Collar
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: A5029
Samy's Part #: S-003092

This 9 ft 10 in double riser light stand features a low profile base that slips easily into position on set. It is supplied with wheels and positive brakes.
Availability: In Stock
$25099
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 100850
Samy's Part #: S-009345

The Reflector Holder attaches directly to any Creative Light Stand (and most other brands), it holds the reflector in two positions to make sure it stays in place. And the adjustable arm ensures you can position the Reflector where needed, quickly and easily.
Availability: In Stock
$2900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 25LB
Samy's Part #: S-024744

The Saddle Sandbag 25 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:

  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty
...
Availability: In Stock
$3195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3110
Samy's Part #: S-001564

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B427802
Samy's Part #: MATTB427802

Designed because of the growing demand for a boom which would not bend when an array of accessories are added to small lighting fixtures or strobes such as light banks egg crates etc. Made completely out of steel the Mini Boom mounts on a 5/8" Baby Pin and will extend 7 feet terminating in a 5/8"...
Availability: On Backorder
$16320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 088LBP
Samy's Part #: MANF088LBP

The Manfrotto 088LBP Adapter 1/4"-20 To 3/8" with  Flange converts 1/4" screw to 3/8".
Availability: In Stock
$1100
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 15LB
Samy's Part #: S-024743

The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty
...
Availability: In Stock
$2395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 209495
Samy's Part #: MATT209495

The Matthews Foam Core Holder is manufactured with a pivoting ball that locks for easier adjustment of the foam core or bead board that you tape onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set.
Availability: In Stock
$4495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 63302
Samy's Part #: S-043272

The Matthews 5/16 In. Knurled T-Knob is a replacement for one of the knobs that come with lighter weight stands without brass braking.
Availability: In Stock
$500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 269BU
Samy's Part #: MANF269BU
The Manfrotto 269BU Black Super Stand will support a load of up to 77 lb. It can rise to a height of 14.9 feet. It has a black, anodized finish. It has a leveling leg, which allows it to adjust for safe use on uneven terrain. Sets up easily in the matter of seconds. It is made from pressure die...
Availability: In Stock
$33588
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 420112S15
Samy's Part #: MATT420112S15

The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps are half...
Availability: In Stock
$4240
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG600412
Samy's Part #: S-019055

The Kupo 6" Chain Clamp with Duel Baby 5/8" Studs consists of a locking pair of pliers with a 6" length of chain that can be wrapped around odd shaped objects such as a tree branch.

This clamp features two baby 5/8" (16mm) studs, one mounted on the back of the clamp and another at a right angle...
Availability: In Stock
$5850
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 036MR
Samy's Part #: MANF036MR

For use with the Super Clamp. Ends in a 5/8" stud, and has a hole to insert a safety cable, for use when hanging a light fixture.

* Replaces part # 2898
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350623
Samy's Part #: S-018671

The Matthews 1/4-20 To Baby 5/8-F Adapter 1/4-20 To Baby Conversion Adapters for Lighting 1/4-20 To Baby 5/8-F Adapter 
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: D700B
Samy's Part #: AVEND700B

Positions and holds reflector for hands free use.
Availability: In Stock
$5688
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1150
Samy's Part #: S-004573

General purpose counterweight can be used with any light stand or boom. Includes "Hi-Vis" yellow stripes so it is easy to see in a darkened studio, prevents accidents. Sandbag has two pockets which can be filled with sand to produce the proper counterbalance effect (sand not included.) Also...
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427006
Samy's Part #: S-047399

The Matthews Suction Pump Cup with Camera Mount (6 In.) is used to install your camera on the car hood for action recording. Pump until the red marker disappears to create an amazing bond to nonporous surfaces such as car hoods and doors. The Matthews 6" diameter Suction Pump Cup has a 5/8" pin....
Availability: In Stock
$9500
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 299555
Samy's Part #: MATT299555

Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with...
Availability: In Stock
$3395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG010412
Samy's Part #: S-045018

The Kupo Monitor Adapter Arm with Baby Receiver is robust adapter allows you to mount monitors up to 17.6 lbs onto any baby pin. This adapter is an ideal way of supporting your monitor on a light stand for mobility; the receiver is 5/8", making it compatible with a wide variety of grip gear. The...
Availability: In Stock
$9195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DS-007
Samy's Part #: S-044531

The Savage Drop Stand Light Stand (7 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
Availability: In Stock
$5799
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Availability: On Backorder
$7699
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
$4990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1058
Samy's Part #: S-004299

A lite weight stand for small strobes and light weight lampheads. Ideal for speedlites, photofloods, and smaller monolites.
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756020
Samy's Part #: MATTB756020

Features a sliding leg making it usable on uneven place flags, color gels, bounce cards, and silks in front of light sources to block, direct, or modify the light. It can also be used to mount lights or rig anything that will fit on the stand.
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9VP5081D
Samy's Part #: S-049549

The 9.Solutions Python Double Clamp is more to the Python Clamp than meets the eye. It can be adapted for use with many different accessories used in photo, video, stage, and visual merchandising. Some examples of use includes Photo and Video: It can be used in a combination with a grip head,...
Availability: On Backorder
$4299
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA051
Samy's Part #: S-034613

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B389787
Samy's Part #: MATTB389787

The Matthews Light Medium Kit Aluminum Stand is designed primarily for use in lighting kits, this stand is compact and light weight. This stand employs a brake shoe system for locking off the riser tubes as opposed to pinch castings.
Availability: In Stock
$8320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350580
Samy's Part #: MATT350580

The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
Availability: In Stock
$3200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: A2033FCBKIT
Samy's Part #: S-000917

Avenger black 40" century stand folding base and kit. This kit includes a 2.5" swivel grip and a 40" grip arm. A favorite among professional photographers, film makers and videographers everywhere. It is durable and designed to collapse flat for easy transport and storage. The leg design provides...
Availability: In Stock
$19588
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1100
Samy's Part #: DOTLRS1100

Medium weight stand for strobes and lampheads Features flip type positive locking levers to secure each section.
Availability: In Stock
$4595
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]