CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3110
Samy's Part #: S-001564

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: On Backorder
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 186
Samy's Part #: MANF186

Manfrotto adapter 3/8" Female to 5/8" Male Stud and is 50mm Long.

* Replaces item # 3357
Availability: In Stock
$612
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756120
Samy's Part #: MATTB756120

Matthews C-Stand with Turtle Base, includes Grip Head and Arm, non-spring loaded base.
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0390P
Samy's Part #: S-014910

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG601612
Samy's Part #: S-015133

A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an "ear" that is d...
Availability: In Stock
$9450
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YLSC2400T
Samy's Part #: S-034603

The Phototools Light Stand with Leveling Leg is a four section light stand with a leveling leg that extends to provide secure support of lighting equipment on uneven surfaces like stairs and other terrain.

The stand extends to a maximum height of 8.2' and has a 5/8" Baby top stud.
Availability: On Backorder
$7999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3139P
Samy's Part #: S-023356

The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: On Backorder
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Availability: On Backorder
$7699
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: B756020
Samy's Part #: MATTB756020

Features a sliding leg making it usable on uneven place flags, color gels, bounce cards, and silks in front of light sources to block, direct, or modify the light. It can also be used to mount lights or rig anything that will fit on the stand.
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 025BS
Samy's Part #: MANF025BS

The Manfrotto 025BS Super Boom features coaxial geared controls at the end of the boom, which permits movement of 180 degree. The 008BU (a.k.a 3071B) two section stand has black painted aluminum construction, with wheels. The stand section supports light fixture loads up to 66 lbs (30kg), to a...
Availability: On Backorder
$65099
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: B6040X
Samy's Part #: S-039036

The Avenger Super Wind-up 40 Stand with Braked Wheels (12.6 ft.) is a heavy lift stand with strengthened stainless steel column and legs, chrome steel risers and geared column. 3 section, 2 risers which extended simultaneously at 4.4cm per handle turn. Safety cable ensures simultaneous retrieval...
Availability: In Stock
$1,27888
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: H386020
Samy's Part #: MATTH386020

The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
Availability: On Backorder
$28560
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1052BAC
Samy's Part #: S-006185

Lightweight and strong, the 93" Alu Air Cushioned Compact Stand - Black is the portable solution for on-the-go photographers. Its reliable aluminium body will keep your camera or lighting in place so you can capture that perfect shot while knowing that your equipment is secure.

Featuring an i

...
Availability: On Backorder
$8399
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DL4001P
Samy's Part #: S-024781

The new, economical Dot Line Corp. Table Top Tripod Clamp Combo is a composite material clamp that features locking metal legs that fold up out of the way when not in use. The feet of the legs are a composite material to help protect surfaces. The ball head rotates 360° and tilts 90°. The jaw...
Availability: On Backorder
$1195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B387486
Samy's Part #: MATTB387486

The Matthews Reverse Stand is best suited for location work, since it can fold back on itself into a very compact package only 22.75" (58 cm) long. It has four risers, and its maximum height is 83.5" (2.1 m).

It can accommodate 11 lbs (5 kg) at maximum height.
Availability: In Stock
$7200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PD05020
Samy's Part #: KALTPD05020

For mounting a camera, or small light fixture that has a 1/4-20 inch screw threaded bottom. The Ultra Clamp Assembly locks and tightens to any side car window, shelf or arm up to 1-1/2 inch thickness. Includes a locking 2 way swivel/tilt head.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 299552
Samy's Part #: S-004124

Sandbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, for hanging on hooks or risers. Some have two wings, to allow draping over light stand legs.
Availability: In Stock
$3695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 10LBRH
Samy's Part #: S-043030

The STUFFT Sandbag 10 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
Availability: In Stock
$2295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429232
Samy's Part #: MATT429232

90 degree pin / receiver. Weighs .9 pounds.
Availability: On Backorder
$3095
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 035RL
Samy's Part #: MANF035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS-1145
Samy's Part #: S-022074

The RPS Studio 6 ft. Medium Boom Stand & Arm has a 2-section adjustable boom arm, a 3-section light stand, a connecting knuckle, and a fillable sand bag with connecting ring
Availability: In Stock
$7995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 5571
Samy's Part #: S-035326

The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: In Stock
$7990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BLS1
Samy's Part #: S-048520

The ProMediaGear Rosette Adapter for Profoto B1/B2 Off-Camera Flash Mount Stud is a light Adapter for Profoto B1 B2 Broncolor Elichrom Standard Light-stand Mount Studs. Expand your lighting options with this rock solid rosette mount. Swing your flash forward or back and have it stay there. It...
Availability: In Stock
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 035
Samy's Part #: MANF035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: In Stock
$2699
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F805
Samy's Part #: AVENF805

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: In Stock
$1250
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3506024
Samy's Part #: S-006320

For use with MICROgrip mounts and bases, positioning lighting and scrims to create dramatic and creative lighting effects with an on-camera lighting fixture or attached to a base. Tapped with standard 3/8 in. threading.
Availability: In Stock
$865
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 209632
Samy's Part #: MATT209632

Snap in Pins for mounting of lighting fixtures. These 5/8" pins fit most motion picture and still photographic instruments.
Availability: On Backorder
$650
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL-0392P
Samy's Part #: S-014911

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 01438
Samy's Part #: MANF01438

The Manfrotto 01438 Rapid Adapter fits any light stand with a 5/8" top stud, and will allow vertical or horizontal mounting of a light fixture, flash, or camera that has a 3/8" thread.

Replaces item # 3102
Availability: In Stock
$1095
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B209642
Samy's Part #: S-012793

The Matthews Swivel U-Hook Snap-in is a U-Hook bracket to hang cables. It can also be used in pairs to suspend tubes, pipes, photography backgrounds or even to support a horizontal Matthpole.
Availability: In Stock
$1395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F1000
Samy's Part #: AVENF1000

Ideal for mounting small lights and camera systems onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots.
Availability: In Stock
$6988
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]