CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 756040
Samy's Part #: MATT756040
Includes FREE 6 In. Pin with Collar
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756040
Samy's Part #: MATTB756040
Includes FREE 6 In. Pin with Collar
Includes Free
Total Value: $16.85
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756120
Samy's Part #: MATTB756120

Matthews C-Stand with Turtle Base, includes Grip Head and Arm, non-spring loaded base.
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B387486
Samy's Part #: MATTB387486

The Matthews Reverse Stand is best suited for location work, since it can fold back on itself into a very compact package only 22.75" (58 cm) long. It has four risers, and its maximum height is 83.5" (2.1 m).

It can accommodate 11 lbs (5 kg) at maximum height.
Availability: In Stock
$7200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: On Backorder
$4990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1058
Samy's Part #: S-004299

A lite weight stand for small strobes and light weight lampheads. Ideal for speedlites, photofloods, and smaller monolites.
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 425B
Samy's Part #: MANF425B

Largest boom in the range, remote control of pan, tilt and rotation of laminar plus geared telescopic extension. Combination of black zinc steel and black anodized aluminum tubes.
Availability: In Stock
$98699
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA051
Samy's Part #: S-034613

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 237HD
Samy's Part #: MANF237HD

A flexible Heavy Duty arm designed to be used with the super clamp system. Similar to the 2896 Flex Arm but with a larger diameter of .7". The Flexarm can hold light weight fixtures like a 150W Fresnel or props and be easily moved and held in place without having to lock any knobs.

Flexible arm, 1/2" diameter, 2...
Availability: In Stock
$3199
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 100850
Samy's Part #: S-009345

The Reflector Holder attaches directly to any Creative Light Stand (and most other brands), it holds the reflector in two positions to make sure it stays in place. And the adjustable arm ensures you can position the Reflector where needed, quickly and easily.
Availability: In Stock
$2900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0390P
Samy's Part #: S-014910

The DLC Articulating Friction Arm is all metal in every segment, with lots of different mounting options. It features a head that rotates 360
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 541004
Samy's Part #: MATT541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
$3600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 269BU
Samy's Part #: MANF269BU
The Manfrotto 269BU Black Super Stand will support a load of up to 77 lb. It can rise to a height of 14.9 feet. It has a black, anodized finish. It has a leveling leg, which allows it to adjust for safe use on uneven terrain. Sets up easily in the matter of seconds. It is made from pressure die...
Availability: In Stock
$33588
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: A5033
Samy's Part #: S-003094

A smooth running studio performer, with low profile base that slips easily into position on the set. The base folds for easy storage or transport. Supplied with free-running wheels and positive brakes.


FEATURES:
  • Universal Top 5/8 inch ("baby")
Availability: In Stock
$21299
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427006
Samy's Part #: S-047399

The Matthews Suction Pump Cup with Camera Mount (6 In.) is used to install your camera on the car hood for action recording. Pump until the red marker disappears to create an amazing bond to nonporous surfaces such as car hoods and doors. The Matthews 6" diameter Suction Pump Cup has a 5/8" pin....
Availability: In Stock
$9500
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F805
Samy's Part #: AVENF805

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: On Backorder
$1250
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3139P
Samy's Part #: S-023356

The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: In Stock
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350617
Samy's Part #: S-015212

The MicroClamp can grip to round or flat surfaces, as well as many other objects or shapes one may find on set. It's reduced size and dual 3/8" and ΒΌ" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an...
Availability: On Backorder
$2320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Availability: On Backorder
$7699
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 299552
Samy's Part #: S-004124

Sandbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, for hanging on hooks or risers. Some have two wings, to allow draping over light stand legs.
Availability: In Stock
$3695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: H386020
Samy's Part #: MATTH386020

The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
Availability: On Backorder
$28560
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F808
Samy's Part #: AVENF808

This Avenger F808 6.0 in. Baby Wall Plate is a 3.5 x 5.87 in. chrome-plated steel plate with a welded 5/8 in. Baby pin. The plate has eight anchor points for nails or screws, which are not included. This item may be used on a wall or free-standing as a floor-level light mount.
Availability: On Backorder
$1695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756020
Samy's Part #: MATTB756020

Features a sliding leg making it usable on uneven place flags, color gels, bounce cards, and silks in front of light sources to block, direct, or modify the light. It can also be used to mount lights or rig anything that will fit on the stand.
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 249561
Samy's Part #: S-041936

The Matthews The Slider Stand (3.8 ft.) meets the demand for a strong, wide-based stand with a low working height for those using camera sliders and Speed Rail/Pipe Dolly Systems. Baby Ballhead Adapter, Magic Finger and Stand/Spud Adapter sold separately. The Slider Stand comes standard with two...
Availability: In Stock
$28160
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 037
Samy's Part #: MANF037

The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8" screw at one end and a 1/4"-20 screw at the other end. Replaces old part number 2907.
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350634
Samy's Part #: S-028883

This small, compact Matthews Dove Tail Camera Mount has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your Noga Arm by Matthews. The mount holds your camera with firm stability and features with quick release system to add or remove your...
Availability: On Backorder
$4299
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 01414
Samy's Part #: MANF01414

The Manfrotto 01414 Rapid Adapter fits any light stand with a 5/8" top stud. It will allow vertical or horizontal mounting of a light fixture, flash, or camera that has a 1/4-20" thread.

Replaces item # 3105
Availability: In Stock
$944
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS1100
Samy's Part #: DOTLRS1100

Medium weight stand for strobes and lampheads Features flip type positive locking levers to secure each section.
Availability: On Backorder
$4595
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3110
Samy's Part #: S-001564

This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PH01200
Samy's Part #: S-048042

The Phottix Indra Battery Mount for Light Stand, the perfect way to affix your Indra500 Battery Pack to a light stand. The high-grade aluminum clamp opens to 30mm and is lined with slip resistant materials. Using the included elasticized strap, the Indra500 Battery Pack is held securely to...
Availability: In Stock
$7695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 10LBRH
Samy's Part #: S-043030

The STUFFT Sandbag 10 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
Availability: In Stock
$2295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 35LBRH
Samy's Part #: S-043033

The STUFFT Sandbag 35 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
Availability: In Stock
$3695
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]